• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.3
• /
• pp.189-193
• /
• 2015

Bad drainage problems from paddy fields adjacent to roads are caused by higher constructed roads which change topography of paddy fields to concave topography and artificial pan to prevent road erosion when road constructions are occurred. This study investigated effects of topography changes on soils by road constructions. Soil samples were investigated by physico-chemical analyses and micromorphology analyses from representative soil profile of Sachon series and soil samples. The characteristics of Sachon series that were adjacent to roads were fewer redoximorphic features (RMF) and increase in grey layers than the original Sachon series. The characteristics of Yecheon Series were shown from Jeollanamdo - Suncheon > Chungchungnamdo - Cheonan > Gangwondo - Wonju. Mosaic speckles were shown from micromorphological analyses because of repeat of shrink and expansion by wetting and drying. The location of graying in soil clods were found from coarse stone blocks to fine stone blocks and color changes of composed particles were also found.

• Journal of Animal Environmental Science
• /
• v.19 no.1
• /
• pp.9-18
• /
• 2013

Currently, there was no producing system of TMR for pig feeding in Korea. In this study, we examined unrolling, cutting, and softening for the round bale silage. We designed and developed the prototype system of round bale silage for pig feeding. Unroll method were lower chain conveying and upper belt conveying which includes an hydraulic vertical fodder knife. Gathering and cutting method were rotating auger and flywheel which have 10 cutters, input roller of 280 rpm, and cutter rotating speed of 1,750 rpm. Softening device was rotating hammer in inclined cylinder adjustable to $25^{\circ}C$ and rotating speed up to 1,300 rpm. The prototype system was integrated working for unrolling, cutting, and softening. We found that when the round bale silage in unrolling apparatus cut length of 20 cm to input cutting apparatus, the cutting performance was well in continuous working up to input rate of 1,000 kg/h, the softening apparatus was working well.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.5
• /
• pp.959-961
• /
• 2011

Manure-based composts can have detrimental effects on the agricultural lands and crops if they are applied without proper stabilization process. Composting is well-known method for the stabilization of manure-based composts and the extent of composting could be examined by maturity test. Among various methods to examine compost maturity, the performances of two mechanical methods (Solvita and CoMMe-100) were examined and the test results were compared with seed germination test. The mechanical methods are considered to be simple and relatively objective. Also they are cost- and time-efficient. Ten commercially available composts collected in Korea were used for this study. Basically, the maturity determined with these mechanical methods was in good agreement with the seed germination test. However, it appeared that the index levels of compost maturity indicated more maturity by CoMMe-100 than Solvita for the same compost. The differences between maturity index levels determined by both methods were able to be minimized through extending the reaction time for CoMMe-100 and adjusting index level for maturity determination in the standard color chart.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.31 no.1
• /
• pp.25-29
• /
• 2015

The white-spotted chafer, Protaetia brevitarsis (Coleoptera: Scarabaeidae), has been traditionally used in Korea as a medicine for preventing liver-related diseases and suppressing liver cancer. Therefore, this insect is economically important and is commercially reared and sold in Korea. Recently, P. brevitarsis was listed as a temporal food ingredient by the Korean Ministry of Food and Drug Safety. Given the increasing economic importance of this beetle, we have sought to improve rearing conditions for its commercial production. In this study, we compared the effects of two food supplements, clay and charcoal, on the growth of second instar larvae of P. brevitarsis. Clay and charcoal are generally known as good adsorbent for removal of contaminating substances in insect feed. We fed second instar P. brevitarsis larvae a commercial diet consisting of fermented sawdust with seven different combinations of clay and/or activated charcoal, and measured their effects on weight gain for approximately 17 wk until larvae pupated. We found that addition of clay at 2.5% w/w of the fermented sawdust diet had no negative effect on weight gain of second instar P. brevitarsis larvae and thus may improve the quality of P. brevitarsis as a commercial food.

• Korean Journal of Agricultural Science
• /
• v.41 no.4
• /
• pp.391-398
• /
• 2014

Identifying soil water content as a major factor for evaluating irrigation and water resource is a primary module to develop a prediction model. A variety of PTFs (Pedo-Transfer Functions) are applied in the models to estimate soil water content, the analysis techniques, however, which compare the estimated from models and the measured by instruments, are not reached at the level to demonstrate the effectiveness of the PTFs in Korea. Many soil physicians such as Eom, Peterson, Rawls, Saxton, Bruand, Baties, Tomasella & Hodnett (T&H), and Minasny, have developed analytic models using PTFs. Soil data for the analysis used soil water contents on 347 soil series (10 kPa), 358 soil series (33 kPa), 356 soil series (1,500 kPa) established by NAAS (National Academy of Agricultural Science). A coefficient of determination on soil water content at 10, 33 and 1,500 kPa was the highest as 0.5932 in EM (Eom model), 0.6744 in REM (Rawls model) and 0.6108 in REM, respectively. In conclusion, it is strongly suggested that the use of EM or REM is suitable for estimating soil water content in Korea although SM (Saxton model) has been widely used.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.1
• /
• pp.47-57
• /
• 2010

More than 2,500 accessions of squash germplasm are preserved in the National Agrobidiversity Center of RDA, Korea. We investigated the ecological and morphological characteristics on 100 accessions of the squash germplasms with a low viability. Two typical types of oriental squash (Cucurbita moschata) and western squash (Cucurbita maxima) are possessed 89 and 11 accessions, respectively. The origin of 100 accessions was divided into three groups, group I (Korea landraces with 81 accessions), group II (Nepal with 15 accessions) and group III (Russia, Uzbekistan, Laos, and Mexico with each one accession). Seventy eight accessions germinated at $27^{\circ}C$ in growth chamber. Days to first flowering of the female and male flower ranged from 32 days to 67 days and 24 days to 55 days after planting, respectively. Vine length showed the largest variation ranging from 357.8 cm to 1,465 cm, also the average length of ten stem node range has a variable ranges from 92 cm to 217.5 cm. All regenerated squash accessions have an only collided tendril and have three to seven lateral shoots. The flattened globe-shaped squash is the most predominant and exhibited ordinarily round shaped, ball shaped, long oblong-shaped, elongated shape, and pear shape. The average weight of fruit ranged from 1.33 kg to 7.95 kg. Sugar contents showed 5.4~12.6 $Brix^{\circ}$ without ripening period.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2005.06a
• /
• pp.14-15
• /
• 2005

• Molecular & Cellular Toxicology
• /
• v.4 no.2
• /
• pp.100-105
• /
• 2008

Biochips are a powerful emerging technology for biomedical, environmental applications. Especially, making use of bioseonors in the evaluation of toxicity becomes increasingly important. For biosensor as a toxicity detection, biomolecules like antibodies or aptamers have been developed to specifically capture the toxic target molecules. In addition, the development of optimal chip materials capable of maintaining the activity of embedded biomolecules such as proteins or aptamers has proven challenging. Here, using sol-gel materials, new chip material, whose ability for immobilizing the embedded aptamers and maintaining the ability of embedded aptamers is optimal, was searched. We used sol-gel formulation screening methods previously developed and found the best formulation which shows high sensitive and specific interactions of aptamers. This study results will support the technological advancement for diagnosis and environmental sensor.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.6
• /
• pp.381-388
• /
• 2015

The speed and oscillation directions of elastic waves propagating in the [ab0] direction of a silicon single crystal were obtained by solving Christoffel's equation. It was found that the quasi waves propagate in the off-principal axis, and hence, the directions of the phase and group velocities are not the same. The maximum deviation of the two directions was $7.2^{\circ}$. Two modes of the pure transverse waves propagate in the [110] direction with different speeds, and hence, two peaks were observed in the pulse echo signal. The amplitude ratio of the two peaks was dependent on the initial oscillating direction of the incident wave. The pure and quasi-transverse waves propagate in the [210] direction, and the oscillation directions of these waves are perpendicular to each other. The skewing angle of the quasi wave was calculated as $7.14^{\circ}$, and it was measured as $9.76^{\circ}$. The amplitude decomposition in the [210] direction was similar to that in the [110] direction, since the oscillation directions of these waves are perpendicular to each other. These results offer useful information in measuring the crystal orientation of the silicon single crystal.

• The Korean Journal of Applied Statistics
• /
• v.25 no.4
• /
• pp.669-680
• /
• 2012

Noise removal of document images is a necessary step during preprocessing to recognize characters effectively because it has influences greatly on processing speed and performance for character recognition. We have considered using the spatial filters such as traditional mean filters and Gaussian filters, and wavelet transformed based methods for noise deduction in natural images. However, these methods are not effective for the noise removal of document images. In this paper, we present noise removal of document images using support vector regression. The proposed approach consists of two steps which are SVR training step and SVR test step. We construct an optimal prediction model using grid search with cross-validation in SVR training step, and then apply it to noisy images to remove noises in test step. We evaluate our SVR based method both quantitatively and qualitatively for noise removal in Korean, English and Chinese character documents, and compare it to some existing methods. Experimental results indicate that the proposed method is more effective and can get satisfactory removal results.