• 산업경영시스템학회지
• /
• 제22권53호
• /
• pp.69-78
• /
• 1999

We developed an apparatus for odorous stimuli control to record olfactory evoked potentials from human scalp. The characteristics of the apparatus were as follows. 1. Translating the subjects respiration into electric signals with a sensor attached to the nose. The period and timing of odorous stimuli could be adjusted, so that stimuli could be synchronous with respiration. 2. The respirations translated into electric signals were made constant in amplitude by using an auto gain control circuit. 3. The interstimulus interval of odorous could be arbitrarily selected once every 1 to 9 respirations so that adaptation could be prevented. We obtained olfactory - evoked potentials (OEPs) to odorous stimuli using this apparatus from the site of Cz, whose positive peak latencies were approximately $180{\pm}23ms$. Such response were not recorded if oxygen stimuli were used instead of odorous or with click sounds produced by the switching electromagnetic valve.

• 대한기계학회논문집A
• /
• 제34권1호
• /
• pp.73-78
• /
• 2010

재료의 인장 물성 측정 불확도 평가가 수행되었다. 인장 물성 측정에 영향을 주는 불확도의 요인이 구분되어 분석되었고 인장 시험으로부터 측정되는 측정량, 즉 탄성계수, 항복 강도 그리고 인장 강도의 불확도 평가 모델이 본 연구에서 제시되었고 각 측정량에 대한 대응하는 수학적 모델과 측정치로부터 각 측정치의 감도계수를 계산함으로서 유도 되었다. 각 모델에 근거하여 ISO 6892에 따라 결정되는 SUS316LN의 실험적 데이터로부터 인장 물성의 불확도가 평가되었다.

• 센서학회지
• /
• 제10권3호
• /
• pp.163-172
• /
• 2001

넓은 지역에 걸친 침입자의 침투를 감시하기 위하여 수십 km의 광섬유 길이 전체를 감지부로 사용할 수 있는 광섬유 BOTDA (Brillouin Optical Time Domain Analysis) 센서를 개발하였다. 광섬유 BOTDA 센서는 한 개의 레이저 다이오드와 두 개의 광전 변조기(electro-optic modulator)를 사용하여 간단하게 구성하였다. 침입자에 의한 광섬유의 변형률 변화를 탐지하는 실험을 수행하기 위하여 광학테이블 위에 광섬유에 변형률을 인가하기 위한 실험장치를 설치하여 실험을 수행하였다. 이 실험으로부터 시간간격 1.5 초동안 광섬유 약 4.81 km의 길이를 거리분해능 3 m로 침입자를 탐지할 수 있음을 확인하였다.

• Journal of Magnetics
• /
• 제16권3호
• /
• pp.225-228
• /
• 2011

Magnetic properties and Rockwell hardness of 1Cr-0.5Mo steel have been investigated as a function of isothermal aging time. Our results showed that coercivity, hysteresis loss and Rockwell hardness in the aged samples decreased as aging time increased. This phenomenon was analyzed using optical microscopy and scanning electron microscopy. A significant diffusion of Cr and Mo atoms formed $M_2C$ and $M_7C$ carbides, lowering the matrix strength. $M_2C$ and $M_7C$ carbides partially segregated inside grains, diffused into grain boundaries, and finally resulted in a soft ferrite matrix and a hard grain boundary. The magnetic and mechanical softening of the matrix is likely to govern the properties of the sample more than the hardening of the grain boundary by carbide precipitations.

• 대한안전경영과학회지
• /
• 제19권2호
• /
• pp.51-61
• /
• 2017

The purpose of this study is to investigate EU, UK and USA's laws and standards related to safety criteria for commercial kitchen machines. The study was based on literature survey and web surfing. The results revealed that EU has relevant directives by kitchen machines and harmonized standards according to the directives. The directives and harmonized standards are translated into the laws and standards of EU member countries, respectively. The kitchen facility relevant legal systems of UK and USA do not prescribe the safety devices or measures, but only the basic health and safety requirements. The requirements were forcefully implemented through the certificate systems such as CE(Confommite European), UL(Underwriters Laboratories), etc. Only products with CE, UL or NRTL(ationally Recognized Testing Laboratory) certificate marking can be placed on the market of EU and USA, or put into service. For achieving the certificates, all requirements regulated in the relevant standards should be met. The standards of UK and USA were presented by kitchen machines or by standards themselves, respectively. Safety devices required by the standards were also summarized by kitchen machines and their risk factors.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.359-359
• /
• 2014

In this study, surface plasmon resonance structures for the selective and the enhanced transmission of infrared light were designed. In order to relieve the large discontinuity of refractive index between air and metal hole array, $Si_3N_4$ was used as the impedance matching layer. Experimental parameter were calculated and determined in advance by the rigorous coupled wave analysis (RCWA) simulation, and then the experiment was carried out. A 2-dimensional metal hole array structures were patterned on the size of $1{\times}1cm^2$ GaAs substrate using photolithography process, and 5 nm thick Ti, 50 nm thick Au were deposited by E-beam evaporator, respectively. Subsequently, $Si_3N_4$ films with various thicknesses (150, 350, 550, and 750 nm) were deposited by plasma enhanced chemical vapor deposition (PECVD). For the comparison, transmittance of specimens with and without $Si_3N_4$ was measured using Fourier transform infrared spectroscopy (FTIR) in the range of $2.5-15{\mu}m$. Furthermore, the surface and the cross-sectional images were collected from the specimens by scanning electron microscopy (SEM). From the results, it was demonstrated that the transmittance was enhanced up to 80% by the deposition of 750 nm $Si_3N_4$ at $6.23{\mu}m$. It has advantage of enhanced transmission despite the simple fabrication process.

• 한국산학기술학회논문지
• /
• 제6권1호
• /
• pp.17-23
• /
• 2005

지식, 기술, 정보가 경쟁력의 원천이 되는 산업 발전의 변화추세에 따라 세계 각국은 일-교육$\cdot$훈련-자격의 긴밀한 연계체제인 국가직업능력표준을 통해 국가 인적자원 개발 시스템을 개선해 나아가고 있다 우리나라에서도 노$\cdot$사$\cdot$정 합의에 의해 2002년부터 전 산업분야에 적용될 국가직업능력표준이 개발되고 있다. 본 연구에서는 이렇게 개발된 국가직업능력표준을 이용하여 우리나라 기능대학/전문대학의 컴퓨터 응용기계설계과에서 활용할 수 있는 교육과정과 교재개발방안을 개발하여 제시한다.

• 골판지포장물류
• /
• 제5권25호
• /
• pp.155-160
• /
• 1998

• 한국군사과학기술학회지
• /
• 제4권2호
• /
• pp.112-121
• /
• 2001

From the beginning of 1990s, the leading countries, especially United States, are trying to develop dual-use technology which can be used for both military and commercial purpose, and to improve the efficiency of management system in logistics and procurements. Considering the global trends, Department of Defence has been seeking for solutions as to how to reform military specifications, and launched specification unification projects. As a result of the project, a series of dual-use standards for hardwares are being developed in the form of Korea Industrial Standards(KS standards). However, there are many of foreign standards, which are not readily interpretable by users, referenced in the standards. In this study, needs for the conversion of referenced foreign standards to KS standards are reviewed and the appropriate approaches as to the conversion are suggested.

• 대한안전경영과학회지
• /
• 제19권2호
• /
• pp.107-115
• /
• 2017

As the industrial society develops, the management of the production line becomes more and more important. There are also diversifying Management methods by industry. In addition, National Competency Standards (NCS) have also been developed. As a result, It has been created standards for each job and provide education and training standards for industrial production management tasks. Customer satisfaction is an ever-growing concern of management throughout the world. In addition, Colleges are focusing on vocational education. Because of the opening of the education market, They are competing in various ways. And, To survive in this competition. They are making great efforts to improve the lecture satisfaction. If education is regarded as an industry, it can be classified as a representative service industry. Because it is formed as a perfect competition between colleges. And then in this paper, This will focus on the mechanical production Manager duties of industrial engineering department related NCS. This study also conducted empirical studies to analyze factors affecting the curriculum using the KANO analysis.