• Title/Summary/Keyword: Korea Industrial Standards

Search Result 1,167, Processing Time 0.024 seconds

Development of gripping force and durability test standard for myoelectric prosthetic hand (근전전동의수의 파지력 및 내구성 시험 표준 개발)

  • Gook Chan Cha;Suk-Min Lee;Ki-Won Choi;Sangsoo Park
    • The Journal of the Convergence on Culture Technology
    • /
    • v.9 no.4
    • /
    • pp.393-399
    • /
    • 2023
  • Upper limb amputees wear an upper limb prosthesis for both aesthetic purposes and functional necessity, and in particular, in the case of amputee with both hands, it is essential to wear a myoelectric prosthetic hand capable of gripping action. The prosthetic hand operated by the EMG signal of the remaining muscles is a public insurance benefit item of the Industrial Accident Compensation Insurance, and test method standards are needed to be developed for the safety of the user and the effectiveness of the product performance. In this study, we developed systems for measuring the gripping force of myoelectric hand prosthesis by a load cell and for durability test of the prosthesis over repeated use with a proximity sensor, and propose a test method standard. Since the international test method standard has not yet been established, it is expected that Korea will be able to play a leading role in this standardization field in the future.

Discussion On the Status and Improvements For Technology Leakage Crimes: Based on Acquittal Case (기술유출 형사사건의 처리 실태와 개선 고려사항 논의: 무죄사건을 중심으로)

  • Kyung Joon Hwang;Hun Yeong Kwon
    • Convergence Security Journal
    • /
    • v.22 no.3
    • /
    • pp.41-55
    • /
    • 2022
  • As the importance of technology protection is emphasized day by day, various protection measures are being carried out to protect technology. But attempts to leak technology are continuing. As an alternative to this, stronger punishment is socially required for technology leakage crimes. In response to these social demands, the standard for punishment has been steadily raised. Legislative bills containing additional reinforcement are still pending in the National Assembly. However, in order to substantially enhance the deterrence against crime, it is not enough to strengthen the punishment standards. The effect can only be fully exercised when the certainty of punishment increases. Therefore, this paper focused on seeking ways to increase the certainty of punishment under the current system rather than the reinforcement of the punishment itself. The purpose of this study was to derive the reason why the innocence rate in technology leakage criminal cases is higher than that of general criminal cases by analyzing cases and causes of innocent cases in technology leakage criminal cases. Based on this, I discussed improvement considerations to reduce unfair acquittal cases.

Study on KOLAS Certification Approach for Radiation Protection Products - Focusing on Masks (방사능 방호 제품에 대한 KOLAS 인증 방안 연구 - 마스크를 중심으로)

  • Namhee Park;Wookhyun Yeo;Sungjin Hong
    • Journal of the Society of Disaster Information
    • /
    • v.19 no.4
    • /
    • pp.815-825
    • /
    • 2023
  • Purpose: This paper aims to explore approaches for obtaining KOLAS certification for masks developed as protective equipment for use during evacuation processes in the event of a radiation disaster involving residents within a radiation emergency planning zone. Method: Various reports, papers, and data from the KOLAS accreditation bodies' websites were examined for this study. Result: Although domestic radiation disaster preparedness measures have been established to enhance resident protection, the distribution of protective equipment is limited to thyroid protection drugs. Supplementary support items like masks are necessary to prepare for radiation disasters. Currently, there is no KOLAS-accredited certification body for radiation protection masks. Conclusion: For masks that have established performance certification criteria, a dual process is required for KOLAS certification. This involves obtaining an official test report as an industrial respirator mask, receiving certification, and then obtaining a general test report based on internal standards.

Exploratory Data Analysis on the Connection of the Software Curriculum between the Primary and Secondary Curriculums and the Higher Curriculums (초중등 교육과정과 고등교육과정의 소프트웨어 교과의 연계 문제에 대한 탐색적 데이터 분석)

  • Mi-yeon Kim;Choong-ho Lee
    • Journal of Practical Engineering Education
    • /
    • v.16 no.3_spc
    • /
    • pp.283-290
    • /
    • 2024
  • Software education is an important subject in the era of forth industrial evolution generation, and the number of hours is gradually expanding in Korea's elementary and secondary curriculum, and universities have also opened software-related courses to take liberal arts mandatory regardless of major. The Ministry of Education presented elementary and secondary school programming achievement standards and emphasized the connection between prerequisite subjects as educational goals. Applicants for programming classes at H University also completed information classes in elementary and secondary courses, but many students were new to programming without taking related classes. Therefore, this study analyzed the data using the survey data and achievement scores of programming learners. As a result of the analysis, information classes completed in elementary and secondary courses were not linked to higher education courses at all, and improvements for problem solving were derived. This study is meaningful as a study for effective software education in higher education courses.

Environmental impact of hydroponic nutrient wastewater, used hydroponic growing media, and crop wastes from acyclic hydroponic farming system (비순환식 양액재배에서 발생하는 폐양액, 폐배지, 폐작물이 환경에 미치는 영향)

  • Park, Bounglog;Cho, Hongmok;Kim, Minsang
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.29 no.1
    • /
    • pp.19-27
    • /
    • 2021
  • Hydroponic farming is a method to grow a plant without soil. Plants can be grown on water or hydroponic growing media, and they are fed with mineral nutrient solutions, which are fertilizers dissolved into water. Hydroponic farming has the advantage of increasing plant productivity over conventional greenhouse farming. Previous studies of hydroponic nutrient wastewater from acyclic hydroponic farms pointed out that hydroponic nutrient wastewater contained residual nutrients, and they were drained to a nearby river bank which causes several environmental issues. Also, previous studies suggest that excessive use of the nutrient solution and disposal of used hydroponic growing media and crop wastes in hydroponic farms are major problems to hydroponic farming. This study was conducted to determine the impact of hydroponic nutrient wastewater, used hydroponic growing media, and crop wastes from acyclic hydroponic farms on the surrounding environment by analyzing water quality and soil analysis of the above three factors. Three soil cultivation farms and several hydroponic farms in the Gangwon C region were selected for this study. Samples of water and soils were collected from both inside and outside of each farm. Also, a sample of soil and leachate from crop waste piles stacked near the farm was collected for analysis. Hydroponic nutrient wastewater from acyclic hydroponic farm contained an average of 402 mg/L of total nitrogen (TN) concentration, and 77.4 mg/L of total phosphate (TP) concentration. The result of TP in hydroponic nutrient wastewater exceeds the living environmental standard of the river in enforcement decree of the framework act on environmental policy by 993.7 times. Also, it exceeds the standard of industrial wastewater discharge standards under the water environment conservation act by 6~19 times in TN, and 2~27 times in TP. Leachate from crop waste piles contained 11,828 times higher COD and 395~2662 times higher TP than the standard set by the living environmental standard of the river in enforcement decree of the framework act on environmental policy and exceeds 778 times higher TN and 5 times higher TP than the standard of industrial wastewater discharge standards under the water environment conservation act. For more precise studies of the impact of hydroponic nutrient wastewater, used hydroponic growing media, and crop wastes from acyclic hydroponic farms on the surrounding environment, additional information regarding a number of hydroponic farms, arable area(ha), hydroponic farming area, seasonal, weather, climate factor around the river, and the property of the area and farm is needed. Analysis of these factors and additional water and soil samples are needed for future studies.

A Study on Asphalt Paving Filler Development from Industrial By-products and its Characteristics in Construction Site (산업부산물을 활용한 아스팔트 포장용 채움재 개발 및 현장시공 성능평가 연구)

  • Cho, Do-Young;Park, Keun-Bae;Woo, Yang-Yi;Moon, Bo-Kyung
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.4 no.3
    • /
    • pp.227-234
    • /
    • 2016
  • In this study, asphalt paving filler, which satisfies the KS standards, were prepared from industrial by-products, such as fly ash generated from thermal power plants, cogeneration ash generated from cogeneration plants, and desulfurized gypsum generated from the flue-gas desulfurization process. The properties of the prepared mixed filler and the existing limestone filler were compared through laboratory tests for preparing asphalt mixture using each filler. In addition, asphalt pavement field tests were conducted using the limestone filler and mixed filler. The dynamic stability, Marshall stability, tensile strength ratio, saturation, porosity, and flow value of the asphalt mixtures used in the field test were evaluated, as was done in the laboratory test. The laboratory and field construction test results revealed outstanding tensile strength ratio, Marshall stability and dynamic stability when using the prepared filler than for the existing limestone filler. Through optimization of the mixing design, the possibility of developing fillers, which the characteristics of the existing limestone filler, was confirmed.

Case Study of Cost Effect Analysis for Toxic Compounds to Developing Effluent Limitation Standards : Focus on 1,4-Dichlorobenzene (수질유해물질 배출허용기준 설정에 따른 배출시설 비용영향 분석사례 연구: 1,4-Dichlorobenzene을 중심으로)

  • Kim, Kyeongjin;Kim, Wongi;Heo, Jin;Kim, Kwangin;Kim, Jaehoon;Kim, Sanghun;Yeom, Icktae
    • Journal of Korean Society on Water Environment
    • /
    • v.26 no.4
    • /
    • pp.557-565
    • /
    • 2010
  • Recently, regulations on toxic compounds in aquatic environment have been strengthened in korea due to the increasing public awareness of the water quality. Typically, these regulations include introduction of emerging toxic compounds and stricter effluent limitations for the already regulated compounds. However, too strict regulations may cause excessive burden on the industry. Therefore it is also important to assess the economic impacts when the new effluent limitation guidelines are introduced. The estimation of the additional cost for the wastewater dischargers to meet the new guidelines are based on the selected treatment technology to handle the hazardous substances and the regulatory levels for effluent limitations. To explore the procedures for cost estimation in enforcing new effluent limitations, a case study was performed specially for 1,4-dichlorobenzene. The pollutants of concern are surveyed for different industrial categories and various treatment technologies. For a given pollutant, the general performances of the treatment technologies are surveyed and a representative technology is selected. For a given technology, the capital cost and annual Operation and Maintenance (O&M) cost was calculated. The calculation of baseline costs to operate ordinary treatment technologies is also important. The ratio between the cost for introducing new treatment process and the baseline cost required for conventional technology was used to evaluate the economic impact on the industry. For 1,4-dichlorobenzene, steam stripping and activated carbon processes were selected as the specific treatment technologies. The cost effects to the regulation of the compound were found to be 6.4% and 14.5% increase in capital cost and O&M cost, respectively, at the flow rate over $2,000m^3/d$ for the categories of synthetic resin and other plastics manufacturing industry. For the case of petrochemical basic compounds manufacturing industry, the cost increases were 5.8% and 12.4%, respectively. It was suggested that cost effect analysis to evaluate the economic impacts of new effluent limitations on the industry is crucial to establish more balanced and reasonable effluent limitations to manage the industrial wastewater containing emerging toxic compounds in the wastewater.

Characteristics and Reasonable Management Approaches of Coastal Reclamation in Korean (우리나라 연안매립의 특성 및 합리적 관리방안)

  • Eom, Ki-Hyuk;Lee, Dae-In;Kim, Young-Tae;Kim, Gui-Young
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.15 no.3
    • /
    • pp.227-237
    • /
    • 2012
  • This paper analyzes the current status, characteristics, and problems of coastal reclamation in Korea and suggests effective management approaches. Reclamation is concentrated from the West Sea to the South Sea. In the 1980s and 1990s, most projects were intended for agricultural use, whereas in recent years reclamation for industrial and harbour sites(e.g., ship-building) have been increasing. The continuous onslaught of reclamation and development projects threatens the coastal environment, especially tidal flats and fishing areas, and fishery production has been reduced in some areas. The largest tidal flats have been used for dumping sites of dredged coastal sediments, urban development projects, and industrial complex composition. Thus, it is necessary to assess current policy using top-down approaches after establishing appropriate directions and standards for coastal management. Both short-term development profits and long-term conservation should be considered when attempting to balance development and conservation. In addition, improvements of marine environmental impact assessment and in the legal system are necessary.

Isolation and characterization of a Bacillus spp. for manufacturing the feed additives in livestock (가축의 보조사료 개발을 위한 Bacillus spp.의 분리 및 특성)

  • Park, Hae Suk;Jo, Seung Wha;Yim, Eun Jung;Kim, Yun Sun;Moon, Sung Hyun;Cho, Ho Seong;Kim, Hyun-Young;Cho, Yong Sik;Cho, Sung Ho
    • Korean Journal of Microbiology
    • /
    • v.51 no.4
    • /
    • pp.419-426
    • /
    • 2015
  • The aims of this study were to isolate spore-forming Bacillus strains that exhibit high digestibility and anti-pathogenic bacteria toward feed for calves. Total 136 spore-forming strains were isolated from finished feeds and their ingredients. Among them, 93 strains were identified as Bacillus species when analyzed by 16S rRNA sequencing. For industrial use, three strains named as Bacillus licheniformis SHS14, B. subtilis LCB7, B. amyloliquefaciens LCB10 were selected after evaluating the industrial standards that are related with heat and acid resistance, enzyme activities, and anti-pathogenic activities against Samonella dublin ATCC15480 and E. coli K99. After each culture, 3 selected strains were mixed together at 1:1:1 (v/v/v) ratio and then prepared as the mixed starter culture for feeding. The changes in microbial community were analyzed via 16S rRNA metagenomics. The initial community ratio among three strains was maintained even after manufacturing into final products. Also, in vitro, enzymatic and anti-pathogenic activities were almost same as those when cultured in single culture, and results of anti-pathogenic activities conducted with calves showed 90% activities against lincomycin, which would be indicative of a promising feed starter.

A Study on the Nursing Profession as Stipulated by Health & Medical Laws of Korea (우리나라 보건의료법령에 명시된 간호에 관한 연구)

  • Kim, Eun-Young
    • Research in Community and Public Health Nursing
    • /
    • v.8 no.1
    • /
    • pp.116-132
    • /
    • 1997
  • The purpose of the study is to find out how laws related to the nursing profession can be improved by analyzing the rules and regulations concerning nursing. Furthermore, to help settle legal matters in the process of doing nursing work. The data used for the study are the Health and Medical Act, the Maternal and Child Health Act, the School Health Act, the Special Act for Health and Medical Service in Rural Areas, the Industrial Health & Safety Act and the Notice on Nursing Professional Courses analyzed by age and content. The results of the study are as follows : First, basic nursing practice includes 'nursing care for recuperation and assistance in medical treatment and in special areas including the pre-vention of disease, maintenance of health, control of environment, and other therapeutic activities. It is suggested that the phrase 'assistance in medical treatment' should be eliminated as it limits the basic nursing practice to the assistance of the medical treatment. Second, Article 56 of the Health & Medical Act prescribes a special nurse but it does not prescribe a specific job. Accordingly, the new provison concerning the specific jobs of a special nurse should be added or a job guide should be inseated. Third, it is prescribed that those who have completed the training course after obtaining a license are qualified to be a midwife, a special nurse and a nurse practitioner working in special areas. However, school nurses, occupational health nurses and maternal and health workers are required to obtain a nurse license, but not to take an additional training course. Nurses working in special areas should be legally recognized as nurse specialists. The regulations to control various qualification standards consistently should be established. Fourth, the qualifications and types of nurses by area prescribed by Article 54 of the Health and Medical Act are not consistent with those of special nurses as recognized by affiliated organizations of the Korean Nurse Association and some hospitals. Accordingly, the qualifications and types of special nurses should be adjusted in consideration of special nurses. Fifth, as Article 16, Paragraph 2 of the Health and Medical Act does not prescribe the type and scope of first - aid treatment that nurses can provide, the first-aid treatment of nurses might be considered as an unlicensed practice. The specific regulations regarding these matters should be established. Sixth, the contents of the nursing record, which are prescribed by Article 21 of the Health and Medical Act as a duty, include 1) matters concerning body temperature, pulse, breath and blood pressure 2) matters concerning drug prescription 3) matters concerning input and output 4) matters concerning the treatment and nursing care (Article 17 of the Enforcement Regulations, Health and Medical Act). However, these matters are limited to basic nursing care and assistance in medical treatment. The new recording methods on nursing process are suggested to be adopted legally. Seventh, the prescription right entrusted to nurses which are prescribed by the School Health Act, the Special Act on Health and Medical Service for Rural Areas, and the Industrial Health and Safety Act are not consistent with the rights of nurses as prescribed by the Health and Medical Act. New regulations prescribing the partial right for medical treatment entrusted to nurses in consideration of the restraint of time and place in emergency situations should be established.

  • PDF