• The KIPS Transactions:PartA
• /
• v.11A no.2
• /
• pp.115-122
• /
• 2004

In this paper, the multiple-valued adders and multipliers are implemented by current-mode CMOS. First, we implement the 3-valued T-gate and the 4-valued T-gate using current-mode CMOS which have an effective availability of integrated circuit design. Second we implement the circuits to be realized 2-variable 3-valued addition table and multiplication table over finite fields $GF(3^2)$, and 2-variable 4-valued addition table and multiplication table over finite fields $GF(4^2)$ with the multiple-valued T-gates. Finally, these operation circuits are simulated under $1.5\mutextrm{m}$ CMOS standard technology, $15\mutextrm{A}$ unit current, and 3.3V VDD voltage Spice. The simulation results have shown the satisfying current characteristics. The 3-valued adder and multiplier, and the 4-valued adder and multiplier implemented by current-mode CMOS is simple and regular for wire routing and possesses the property of modularity with cell array. Also, since it is expansible for the addition and multiplication of two polynomials in the finite field with very large m, it is suitable for VLSI implementation.

• The KIPS Transactions:PartB
• /
• v.15B no.6
• /
• pp.507-516
• /
• 2008

Cardiac disease is the leading cause of death in the world. Quantification of cardiac function is performed by manually calculating blood volume and ejection fraction in routine clinical practice, but it requires high computational costs. In this study, an automatic left ventricle (LV) segmentation algorithm using short-axis cine cardiac MRI is presented. We compensate coil sensitivity of magnitude images depending on coil location, classify edge information after extracting edges, and segment LV by applying region-growing segmentation. We design a weighting function for intensity signal and calculate a blood volume of LV considering partial voxel effects. Using cardiac cine SSFP of 38 subjects with Cornell University IRB approval, we compared our algorithm to manual contour tracing and MASS software. Without partial volume effects, we achieved segmentation accuracy of $3.3mL{\pm}5.8$ (standard deviation) and $3.2mL{\pm}4.3$ in diastolic and systolic phases, respectively. With partial volume effects, the accuracy was $19.1mL{\pm}8.8$ and $10.3mL{\pm}6.1$ in diastolic and systolic phases, respectively. Also in ejection fraction, the accuracy was $-1.3%{\pm}2.6$ and $-2.1%{\pm}2.4$ without and with partial volume effects, respectively. Results support that the proposed algorithm is exact and useful for clinical practice.

• Korean Journal of Environment and Ecology
• /
• v.12 no.1
• /
• pp.78-90
• /
• 1998

An objective of this study was to provide database for the planting disign of buffer green space. Types, planting structure, and effect of vuffer green space were investigated in five housing complexes of newtown of metropolitan area, Korea. Buffer green space in the study sites were constructed as mounding, slope, and plate. The number of species was found 20 tree and sub-tree species(10 evergreen and 20 deciduous species ) and 13 shrub species. These species were planted in one-storyed planting structure and there was no difference with ornamental species in the urban parks. Effect of sound proof by the buffer green space was recognized but sound level in four types among the seven types was observed above standard sound level for housing complex(65dB). Effect of sound proof was especially most effective in the mounding type. It was found that planting density and index of plant crown volume were mot satisfied to the function of buffer green space because of lower density and crown volume than natural vegetation per unit. Based on these results, this study suggested that buffer green space is desirable to be developed in the mounding type over two meters height with multi-layer planting model. In addition, there is needed to consider vegetation structure of natural forest around the developing site.

• Journal of Sasang Constitutional Medicine
• /
• v.17 no.1
• /
• pp.84-102
• /
• 2005

Objectives The purpose of this study was to objectify the diagnosis of Sasang constitution. It was analyzed the adult female voices into 44 factors with PSSC-2004. Methods The study was conducted on the subjects inputted /a/ 2.5-3 sec of 217 adult women voices to PSSC-2004. The statistical analyses are applied to three groups: total group, under 55 year-old group, over 55 year-old group. The group of total 216 was composed with 8 Taeyangins, 60 Soyangins, 66 Taeumins and 83 Soeumins. The under 55 year-old group was composed with 6 Taeyangins, 53 Soyangins, 55 Taeumins and 76 Soeumins. The over 55 year-old group was composed with 2 Taeyangins, 7 Soyangins, 11 Taeumins and 7 Soeumins. Results 1. In total group and under 55 year-old one, Soeumin's center pitch were significantly high compared with the others(P=0.005)(P=0.019). It was significant for distinction between Taeumin and Soeumin at the result of post mortem. 2. In over 55 year-old group, Soeumin's center freq.(total) and center freq.(1) were significantly high compared with the others(P=0.024)(P=0.016). In under 55 year-old group, Soeumin's center freq.(4) was significantly high(P=0.025). While Taeumin's center freq.(3) in under 55 year-old group and center freq.(4) in over 55 year-old group were significantly high(P=0.049)(P=0.043). 3. In over 55 year-old group, Soeumin's APQ(center), APQ(2/5), APQ(3/5), APQ(4/5) and APQ(2/3) were significantly high compared with the others. It was significant for distinction between Taeumin and Soeumin at the result of post mortem(P=0.004) (P=0.003) (P=0.004) (P=0.013) (P=0.004). 4. In over 55 year-old group, Soeumin's APQ(1/3), APQ(1/2), APQ(2/2) and zeroover APQ were significantly high compared with the others (P=0.013) (P=0.003) (P=0.008) (P=0.012). 5. In over 55 year-old group, Taeyangin's octave 3 shimmer was significantly high compared with the others(P=0.000). 6. In under 55 year-old group, Taeyangin's total energy was significantly high compared with the others(P=0.040). 7. In under 55 year-old group, Taeyangin's zeroover energy sum was significantly high compared with the others(P=0.038). Conclusions From above result, there is the possibility of efficiency standard guide for constitutional diagnosis by analyzation of the voices.

• Korea Journal of Hospital Management
• /
• v.7 no.4
• /
• pp.172-192
• /
• 2002

The purpose of this study is to ascertain whether the effect of introduction of OCS(Order Communication System) to the hospital is satisfied or not comparing the anticipated effect with the actual effect. For this purpose, a domestic hospital which has introduced and has been operating OCS for several years was chosen. Based on the internal data of S Hospital prepared before introducing OCS, researcher has analyzed the basic direction, design standard and status of operation after the introduction of OCS, etc. After analyzing the status of operations of several departments using OCS and interviewing with the chiefs of pertinent departments, a survey form was designed. Actual survey and interviews were conducted by the researcher for weeks to know whether doctors, nurses, medical technicians and clerks of the patient management dept. were satisfied with OCS and to find if they have any recommendations to improve OCS. Based on the analysis of survey, the effect of OCS was evaluated whether it has satisfied the anticipated effectiveness. For the question if they feel convenient in using OCS, doctors, nursing staffs in charge of ward and the staffs of billing dept. has answered that they were all satisfied(100%). The answers for the same question were relatively high in the case of nurses in charge of outpatient and staffs of radiography. Of course, there have been some nurses and staffs who complained for the inconvenience. However, overall satisfaction was high on the average. Some common problems occurred after the introduction of OCS were frequent errors due to instability of OCS system, paralysis of function of hardware on data back-up system and redundant investment due to erroneous choice of DB program in setting DB. It was also pointed out that lack of computer education and low participation of medical staffs has resulted in failure of developing effective software. As a result, it has lowered the efficiency of OCS. For example, some works have to be done by hands even after OCS. Based on the result of this research, recommendations to maximize the effect of OCS were presented as follows. First, strong leadership of CEO and active cooperation of doctors are mandatory. Second, all the process of hospital work should be analyzed and be redesigned in more efficient ways. Third, OCS should be designed to be user-based system which can be used efficiently by all staffs of the hospital. Forth, prior to the operation of OCS, proper tests of the program and trainings of the pertinent staff are required. Fifth, prior to the selection of hardware, BMT(Bench Marking Test) should be conducted. Sixth, before introducing OCS, staffs in charge of OCS should visit many hospitals operating the OCS system and take their cases into account.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.6
• /
• pp.124-135
• /
• 2015

As many countries have been raising awareness of environmental issues, greater efforts for eco-friendly construction have been made in both governmental and private sectors. However, assessment circumstances for building energy performance and green building standard of legislation are still based on two dimension and handwork. This takes time, cost and labor, and makes assessment inaccurate and inefficient. Therefore, this study suggests methods to improve eco-friendly construction permission process and to automatize open BIM-based assessment of Energy Performance Index (EPI) among several eco-friendly construction certification standards. First, it analyzes the relations between assessment criteria and IFC data, and provides solutions to problems and limitations. Second, it applies the solutions to assessment program in order to automatize open BIM-based assessment for EPI. The eco-friendly construction permission process with these solutions applied will reduce time, cost, and labor by simplifying and automatizing the tasks. Also, the simplified process of design revision will improve not only productivity and efficiency but also accuracy and reliability.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.3
• /
• pp.58-65
• /
• 2014

This study aims to understand the environmental impact reduction of green buildings that are certified by Green standard for energy and environmental design(G-SEED). To ensure this end, this study assessed and compared the environmental impacts(global warning, ozone layer depletion, acidification, and eutrophication) of a G-SEED-certified elementary school building(green building) and an uncertified elementary school building(traditional building) using the life cycle assessment methodology. This study considered the environmental impacts from the material manufacturing, material transportation, on-site construction, and operation during 40 years. The comparison of the environmental impact intensity of two buildings showed that the green building generated much more environmental impacts than the traditional building. For example, the global warming potential of the green building was approximately 12.5% higher than of the traditional building since the global warming potential of the green building was 3.751 $t-CO_2eq./m^2$ while that of the traditional building was 3.282 $t-CO_2eq./m^2$. It signifies that the G-SEED doesn't guarantee the reduction of the environmental impacts in terms of four impact categories. Therefore, the G-SEED should be complemented and improved to achieve the environmental impact reduction.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.190-196
• /
• 2007

As the number of aged-housing has been rapidly increased, many kinds of defects and problems such as degeneration of housing environment, structural performance, and equipment performance have been appeared. The reconstruction as the way to improve the aged-housing has been used mostly because the legal process of the reconstruction is relatively easy. On the other hand, it has caused problems such as the lack of natural aggregates, the environmental damages owing to construction wastes, the loss of national resources, and the lack of the housing for rent nearby the reconstruction area. This problems limit active tying into the reconstruction business at present in the industrial and political perspective. In this context, it is necessary to revitalize the remodeling rather than the reconstruction. In order to reach this objective, this research aims at identifying the user-oriented performance for the housing and deducing the core technology. It is expected that the result of this research can contribute to more revitalize the remodeling as tying researches in terms of design, structure, equipment, and construction.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.431-435
• /
• 2011

This paper presents optimized searching technique to improve the performance of H.264/AVC. The proposed CAVLC encoder uses forward and backward searching algorithm to compute the parameters. By zero-block skipping technique and pipelined scheduling, the proposed CAVLC encoder can obtain better performance. The experimental result shows that the proposed architecture needs only 66.6 cycles on average for each $16{\times}16$ macroblock encoding. The proposed architecture improves the performance by 13.8% than that of previous designs. The proposed CAVLC encoder was implemented using VerilogHDL and synthesized with Megnachip $0.18{\mu}m$ standard cell library. The synthesis result shows that the gate count is about 15.6K with 125Mhz clock frequency.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.1
• /
• pp.81-88
• /
• 2020

Flight data recorder is a equipment that records data required for investigation of aircraft accidents and should be developed in compliance with the ED-112A standard. Unlike general data storage device, flight data recorder must be able to recover data after an aircraft accident, requiring a housing and a memory board to protect data in extreme environments. To attain this performance, we designed a housing that can withstand the test by analyzing the physical environment of the impact, shear/tensile, penetration resistance and static crush test of the crash survival test and minimized the size and weight compared to the existing one in consideration of the installation of the aircraft in this paper. Insulation material and thermal block material were applied to endure high and low temperature fire so that the internal temperature does not rise above 150℃ even in 260℃, 10 hour environment. In addition, the memory board is designed to minimize the size and we devise a hoping programming method to prevent continuous data loss of more than 16 seconds. Through this, Crash protected memory module that satisfies ED-112A was completed.