• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.155-158
• /
• 2009

During the construction project period, a lot of change orders happen in the design and construction stage Especially, The change order during construction stage causes the huge construction cost increase and duration delay. Accordingly, research on the change order of the construction stage is being progressed relatively active in the design stage, but the design changes are rarely made. In the design stage, the owner has to pay a design addition cost when change order due to the demands of owner happens. However Korea has not the specific standard about design additional cost in design stage. Therefore, this study analyzes problems of design additional cost estimation methods through the case study, and then indicates the method that the ratio distributes to details dividing design tasks and the method of the PM(Project Management). Eventually, this study expects to minimize claim related the design additional cost in design stage.

• 전기의세계
• /
• v.16 no.5
• /
• pp.37-50
• /
• 1967

The economical design of steel towers fortrausmission line. This study has been made on the design criteria of steel towers for power trasmission line adopted in the United States of America, France, Japan and Korea in order to find out any access to design the economical steel twers in Korea following to our own climate conditions. As the result of this study, involved in this description. Writer belive that the weight of steel towers can be saved by 10% to 20% approximately on the steel towers which will be constructed in the near future in Korea, by the possibility of reducing the design wind pressures on towers and cables in those areas of inland of Korea, the increase of number of standard towers from four types to five, the adoption of comparative narrower base towers than those in past practice and improvement on the assumption of manimum delection angle of suopension type insulator strings.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.424-426
• /
• 1999

In this paper, the design characteristics, the manufacturing process and the results of performance test on the AC traction motor for urban transit standard E.M.U which is newly developed with applying standardization specification will be introduced. It is reviewed that the design and performance analysis on conventional motors considering system correlation and design constraint and the design optimization through an analysis of electro-magnetic, thermal and dynamic properties. The properties of factory products manufactured by 200 Class VPI process exhibit a excellent performance with a lower noise and vibration, higher efficiency and power factor etc.

• Journal of Aerospace System Engineering
• /
• v.11 no.5
• /
• pp.65-75
• /
• 2017

This study proposes development of 3U CubeSat standard platform whose function and performance are verified via KAUSAT-5 development. 3U CubeSat platform specification was selected for the design of 3U Cubesat standard platform by examining existing CubeSat and state-of-art technology, and consequently a universally usable 3U CubeSat platform was designed. Standard platform was manufactured in 1.5U size and developed with a modular concept to be able to add and expand payloads and ADCS actuators for meeting the user's needs. In addition, in case of the power system, the solar panel, the battery, and the deployment mechanism are designed to be configured by the user. In the mechanical system design of a standard platform, subsystem and micro equipment functions/performance could be integrated and miniaturized on micro-sized PCBs and maximized electrical capability to accommodate multiple payloads. In the development of the 3U CubeSat, the satellite platform adopts the developed standard platform, which can reduce the cost and schedule for the whole satellite development by reducing the additional function verification.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.643-645
• /
• 2011

We analysed a hardware design issues, which is strong, compact and efficient. Due to its low area constraints, primitive based on hardware is especially suited for RFID (Radio Frequency Identification) devices. primitive is based on the classical DES (Data Encryption Standard) design. This approach makes it possible to considerably decrease chip size requirements.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.04a
• /
• pp.261-264
• /
• 2008

A guideline to complement safety problem of escape code at the fire controlling design stage was shown by comparing & analysing developed fire controlling countries such as US, UK, Japan, and etc. and appropriateness of improving legislations for building standard of escape code was examined by comparing & analysing escaping time with escape code simulation(SIMULEX, EXDOUS) as the guideline.

• Proceedings of the Safety Management and Science Conference
• /
• 2008.04a
• /
• pp.443-450
• /
• 2008

This paper is to present design principle and operation strategy of acceptance control chart by the use of OC-Based sampling inspection for continuous data. The unified control limits for acceptance control chart when considering both APL(Acceptable Process Level) and RPL(Rejectable Process Level) are proposed. The control limits can be also extended to the acceptance control chart with unknown process standard deviation.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.10a
• /
• pp.89-96
• /
• 2003

This research presents a methodology for processing design provisions by representing the provisions and also by checking the conformance of design entities with the provisions via STEP information technology, which is considered as a canonical component for implementing CALS. The provisions of standards are represented in the .form of EXPRESS schema including various entities, algorithms, global rules, and local rules, while the schema are managed on EXPRESS engine called EXPRESSO.

• Journal of Fashion Business
• /
• v.15 no.1
• /
• pp.50-62
• /
• 2011

The purpose of this study is to catch the difference for the appraisal standard of a product which the adult women's consumers think importantly when they purchase the clothing made of organic cotton and the appraisal standard according to the demographic characteristics. The data collection for research was done for the women in from their 20's to 50's who are living in the regions of Gyungnam, Busan, Ulsan in Korea. The copies of the used questionnaire were 622 copies. To analyze the collected data, ${\chi}^2$-test, t-test, Cronbach's ${\alpha}$ test, ANOVA, Duncan test were carried out by SPSS 14.0. As the analysis result of data, the appraisal standard for purchasing the clothing made of organic cotton was classified with the five factors. The appraisal standard which the adult women's consumers think importantly when they purchase the clothing made of organic cotton showed the significant difference according to the demographic characteristics. The ratio for post-purchase dissatisfaction showed higher than the one for satisfaction. The dissatisfaction showed the significant difference according to the demographic characteristics. The dissatisfaction for a high price, color and insufficient design showed a relatively high ratio.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.5
• /
• pp.348-358
• /
• 2013

Since the safety accidents on the construction sites take large part of total industry disasters, research on the construction safety has been getting important. Recently, as BIM technology allows cooperation between designer and constructor groups, it becomes more active worldwide than before to study on the ways of accomplish construction safety improvement in the design phase. In this paper, we suggested a checklist for assuring construction safety in the phase of design, and performed automatic evaluation by using a BIM quality checking tool. This shows that it is possible for us to find out the construction safety has been improved in the design phase. Once the standard checklist and assurance process are developed, they are expected to play a great role of reducing disasters in the construction industry.