• Land and Housing Review
• /
• v.11 no.2
• /
• pp.75-86
• /
• 2020

As the urban regeneration project and the old housing maintenance project are actively progressing in Korea, small-scale building construction is being carried out in downtown areas. Small buildings in the downtown area are constructed on about 4 to 10 floors, and since they are carried out in small units in residential areas, it is difficult to enter large equipment to construct existing piles, and it is more vulnerable to complaints about noise and vibration. in this study, helical piles suitable for urban areas or small sites where it is difficult to enter large equipment, such as noise and vibration. Reliability analysis was performed on the results of the static load tests and dynamic load tests conducted at the LH site and the bearing capacity calculated by the hydrostatic method and the empirical formula (N value). As a result of comparing and analyzing the design formula and the results of static load test and dynamic load tests, the correlation between the design formula of the bored pile (Road bridge design standard) formula using N value and the design formula by the modified Davisson method frequently used by method commonly European helical file practitioners.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.484-487
• /
• 2015

The purpose of this study is designing a daily diet according to the nutrition by using genetic algorithms. The ratio of the amount of nutrients needed for each individual is different. For example, people who want to lose, maintain or gain the weight need different amount of nutrition and ratio. In addition, the nutrition should be different between the age groups such as child, youth and senior. So, it is important for each person to individualize content of nutrition that they need not the nutritional standard table. Thus, in this study, by using the genetic algorithm, our study is about the program that can make a daily diet which is optimized for individual. The program has the information of main dish, soup and side dish that we entered before. And person who uses the program can see the daily diet which is optimized related by nutrition what the person entered before. Generally, it is really difficult to design a meal by considering all of the nutrition at home because there are a lot of things to be considered. Therefore, the goal of our study is to make the program what can make a balanced daily diet at home.

• Journal of Information Technology Applications and Management
• /
• v.9 no.1
• /
• pp.85-96
• /
• 2002

Nowadays an information exchange on XML such as B2B electronic commerce is spreading. Therefore the systematic and stable management mechanism for storing the exchanged Information is needed. For this goal there are many research activities for connection between XML application and relational database. But because XML data have hierarchical structures and relational database can store only flat-structured data, we need to store XML data in object-oriented database that support hierarchical structure. Accordingly the modeling methodology for storing XML data in object-oriented database is needed. In order to build good quality application systems, modeling is an important first step. In 1997, the OMG adopted the UML as its standard modeling language. Since industry has warmly embraced UML, its popularity should become more important in the future. So a design methodology based on UML is need to develop efficiently XML applications. In this paper, we propose a unified design methodology for XML applications based on object- oriented database using UML. To this goal, first we introduce a XML modeling methodology to design W3C XML schema using UML and second we propose data modeling methodology for object-oriented database schema to store efficiently XML data in object-oriented databases.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.324-327
• /
• 2011

The design requirement for ground mounted sign structures are fairly well defined in the AASHTO Standard Specifications for Structural Supports for Highway Signs, Luminaries, and Traffic Signals and consists of applying an equivalent pseudo-dynamic loading to account for the dynamic effects of wind loads and ignores the dynamic effect due to moving vehicle loads. This design approach, however, should not be applied to the design of bridge mounted sign structures because ignoring the dynamic effects of the moving vehicle loads may produce non-conservative results, since the stiffness of the bridge structure can greatly influence the behavior. Not enough information is available in the literatures which provide guide lines to include the influence of moving vehicles in the design of the bridge mounted sign structures. This paper describes a theoretical methodology, Bridge-Vehicle Interaction Element, which can be utilized to account for the dynamic effect of moving vehicles. A case study is also included where this methodology was successfully applied. It was concluded that the bridge-vehicle interaction finite element developed can provide a more accurate representation of the behavior of bridge mounted sign structures. The result of these analysis enabled development of simple and effective retrofitting scheme for the existing support system of bridge-mounted-structure.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.7
• /
• pp.520-527
• /
• 2011

Recently, Influenza(AI, PI) patients have been increasing rapidly. But, there is a lack of isolation hospitals. In particular, according to increase the rate of patients with airborne infection, in order to prevent the spread of pathogens, design of layout plan and air conditioning system of isolation hospitals becomes more important to maintain patient's room as negative pressure. In this study, the spread of pathogens are analyzed as room differential pressure, moving time of medical staff and patients, and moving way in isolation hospitals by multizone simulation; CONTAM 2.4. Through the analysis, the ways to improve isolation hospital considered at the design step are reached to prevent the spread of pathogens effectively. Also, it verifies that HVAC system for isolation hospital is suitably designed as standard.

• Journal of Satellite, Information and Communications
• /
• v.5 no.1
• /
• pp.17-21
• /
• 2010

In this paper, we have introduced a new way to design low phase noise PLL which can apply to the Ultra wideband as meeting performance requirements based on structure improvement, circuit supplement, upgraded design method. Before development of the PLL, we simulated spectrum power, phase noise, harmonic characteristic by using ADS(Advanced Designed System). And, we compared result between measurement and simulation. Finally, we confirm a satisfying result which meet performance requirements between required standard and measured value. It will be useful for transceiver of service which operate in Ultra wideband.

• Korean Institute of Interior Design Journal
• /
• no.32
• /
• pp.131-137
• /
• 2002

The development of fast information network connections and the information highway of todays society have made consumers to demand various services in interior design. The media influencing consumer behavior is with no doubt, the Internet. The exponential growth in Internet users in Korea is surprised to all other countries. At this time where new businesses and events on the Internet are developing successfully, the educational and cultural benefits to consumers, which is quite different from the time when consumers only depended on television and newspaper, are enabling consumer demand to grow together with the abundant floods of information. This implies that consumer choice is shifting from needs-based to wants-based products and services. In the past where only the necessities were mass-produced and there was a lack in goods in general, there just werent enough products or varieties for consumers to either compare or evaluate. Today, comparing and evaluating has become natural with the access to information, and consumers have teamed to choose interior products that fit their preferences. In other words, this means that consumers are now at a transition point where they are moving from the simple everyday needs of the past to wants of the present that allows them to form a standard for selecting products of their own preference.

• Journal of information and communication convergence engineering
• /
• v.3 no.2
• /
• pp.80-83
• /
• 2005

At present, GML becomes the global standard for the XML encoding of geographic information and is the foundation for the Geo-Web. GML is being applied to a wide range of geographic applications including GIS and location-based services, telematics and intelligent transportation systems. In this paper, we propose the tourism information system for supporting the location based service application. We made an effort to design and implement a GIS computing environment by thin client for mobile web mapping service. We are interested in the GML applications that include traditional GIS system for navigation service and location finder for points of interest (POI) services. This paper summarizes the Tourism information system for location based service of a small area (Han-Ok Village with the Korean traditional houses in Jeonju-city), in which moving travelers can obtain proper information services at the current location associated with traditional monuments, cultural products, food, and conveniences. In the paper, we report on the design of the thin client/server system for a mobile environment. This paper is divided into three parts. First, we give a general overview of the organization of the system and of the important concerns of our design. Second we focus on our system supports for location and POI determination, and design concerns. Finally, we show the graphic user interface of PDA, the procedures involved in the service, and the executed results.

• International Journal of High-Rise Buildings
• /
• v.13 no.1
• /
• pp.97-102
• /
• 2024

In this paper, we would like to share our ongoing research on global population and demographic shifts and the corresponding need for diverse responses. As population growth varies worldwide, the pressing issue is the current global housing shortage. The USA alone lacks 4 million homes, underlining the urgency for new construction and renewal of existing. Our focus is primarily on new building processes, which must also incorporate elements of renewal for future sustainability. Our research addresses several key questions: How will roles for construction professionals change? What should be the primary goal of the design process? What types of technologies are currently available, and which aspects of the process can be enhanced with AI? A significant part of our study is exploring sustainable building methods that reduce embodied carbon and increase speed of construction. Our goal is to extend the transition from smart homes to cities, analyzing the evolution towards smart communities and cities. A critical aspect of our research is the 'kit of parts concept, involving prefabrication and modular construction. This approach is essential for both rebuilding and new projects, potentially lowering costs in manufacturing and design for long term. Lastly, we present a detailed comparison of the construction industry with manufacturing.

• International Journal of Advanced Culture Technology
• /
• v.12 no.3
• /
• pp.434-440
• /
• 2024

SIZE KOREA updates body measurement data every five years, providing essential information for the fashion industry. This anthropometric data is widely used to diagnose consumer body shapes and develop optimal clothing sizes. Artificial intelligence, particularly machine learning, excels in predicting such body shape classifications. This study seeks to enhance the suitability of clothing design by applying the new analytical methodology of machine learning techniques to better capture and classify the unique body shapes of Korean women. In this study, machine learning techniques such as K-means clustering, Silhouette analysis, and Decision Tree analysis were used to classify the lower body shapes of Korean women in their twenties and identify standard body shapes useful for slacks design. The results showed that the lower body of the age group could be classified into three categories: 'small stature' (the majority), 'tall with an average lower body volume,' and 'medium height with a fuller lower body' (the smallest share). The three-cluster approach is validated through Silhouette analysis, which minimizes misclassification. Decision Tree analysis then further defines the criteria for these clusters, highlighting waist height and hip depth as the most significant factors, achieving a classification accuracy of 90.6%. While this study is not directly related to Robotic Process Automation, its detailed analysis of body shapes for slacks patterns can aid RPA in clothing production. Future research should continue integrating machine learning in human body and fashion design studies.