• Journal of the Korean Society for Railway
• /
• v.17 no.2
• /
• pp.133-139
• /
• 2014

Due to the absence of design guidelines for elevated light-rail structures in Korea, most elevated light-rail structures have been designed and constructed based on the design codes of conventional railway bridges and on the codes recommended by foreign vehicle manufacturers. This is the main reason why most elevated light-rail structures are massive or over-designed or poorly constructed economically. In this paper, the authors carried out field tests to analyze the braking forces caused by braking a train running at speeds of 50km/h, 60km/h, and 70km/h, acting on the elevated structures of rubber-wheeled Light Rail Transit (LRT) trains. The authors also briefly describe the analyzed results of the braking force acting on the substructures of elevated light-rail structures. The test-results presented here in this paper can be referenced when establishing design guidelines or standards for elevated structures of LRT systems.

• KIEAE Journal
• /
• v.11 no.5
• /
• pp.97-106
• /
• 2011

This study has been conducted focusing on the analysis of the turn-key proposal for Gimpo-Han River New City. The study expected that it would come up with design trends and introduction properties of each plan for the eco-friendly development of an apartment house. The concept of environment-friendly design was thought in four parts: 'Land use and transportation,' 'Ecological environment', 'Energy resource and environmental impact' and analysis factors of each part were chosen by specific items from the prospective researches and guidelines that already given on the projects. In conclusion, a proper development of the environmental-friendly apartment house will not be achieved unless the designers try to overcome their prejudice against eco-friendly planning elements applications. Along with the designers' attempt, it is also necessary to review the evaluation articles of the certification system for the existing environmental-friendly structures as well as to compensate and establish detailed evaluation standards. As the problems are being worked on, an integrated, effective evaluation standard for the eco-friendly planning elements will be determined. This way, an environmental-friendly residential development with a better quality will be eventually realized.

• Proceedings of the KIEE Conference
• /
• 2006.10d
• /
• pp.263-264
• /
• 2006

City Train Technology that is large and complex system and consists of mechanical, electronic, electric, materials, computer, communication, civil/track etc. is very important area of railway industry, national fundamental industry. The standardization of city train system as a public transportation method and foundation of national economy is very important in order to do effective operation and to get fundamental technology, and the information system of the standards is required to operate the city train system effectively. By building data base of city train system design knowledge using computer-aided system engineering tool-Cradle, the system development issues and the design solutions are used by all engaged persons, and are managed by modeling and documentation. And this system will support architecture design consistently and effectively by applying this system to formalize early development process, to system requirements and configuration management, to system interface analysis and management and to system behavior analysis etc.. This study is for construction of data base of system design knowledge through making data base of many kinds of standards using CASE tool based on System Engineering Process, and introduces a model to support concurrent engineering for all engineers involved in system development allowing access to standard DB through Web from anywhere and at anytime.

• Proceedings of the KIEE Conference
• /
• 2006.10d
• /
• pp.261-262
• /
• 2006

City Train Technology that is large and complex system and consists of mechanical, electronic, electric, materials, computer, communication, civil/track etc. is very important area of railway industry, national fundamental industry. The standardization of city train system as a public transportation method and foundation of national economy is very important in order to do effective operation and to get fundamental technology, and the information system of the standards is required to operate the city train system effectively. By building data base of city train system design knowledge using computer-aided system engineering tool-Cradle, the system development issues and the design solutions are used by all engaged persons, and are managed by modeling and documentation. And this system will support architecture design consistently and effectively by applying this system to formalize early development process, to system requirements and configuration management, to system interface analysis and management and to system behavior analysis etc.. This study is for construction of data base of system design knowledge through making data base of many kinds of standards using CASE tool based on System Engineering Process, and introduces a model to support concurrent engineering for all engineers involved in system development allowing access to standard DB through Web from anywhere and at anytime.

• Proceedings of the KIEE Conference
• /
• 2006.10d
• /
• pp.259-260
• /
• 2006

City Train Technology that is large and complex system and consists of mechanical, electronic, electric, materials, computer, communication, civil/track etc. is very important area of railway industry, national fundamental industry. The standardization of city train system as a public transportation method and foundation of national economy is very important in order to do effective operation and to get fundamental technology, and the information system of the standards is required to operate the city train system effectively. By building data base of city train system design knowledge using computer-aided system engineering tool-Cradle, the system development issues and the design solutions are used by all engaged persons, and are managed by modeling and documentation. And this system will support architecture design consistently and effectively by applying this system to formalize early development process, to system requirements and configuration management, to system interface analysis and management and to system behavior analysis etc.. This study is for construction of data base of system design knowledge through making data base of many kinds of standards using CASE tool based on System Engineering Process, and introduces a model to support concurrent engineering for all engineers involved in system development allowing access to standard DB through Web from anywhere and at anytime.

• Computational Structural Engineering
• /
• v.9 no.1
• /
• pp.23-32
• /
• 1996

A rule based system for foundation design of building structures is developed with CLIPS in this study. The types of foundation and the allowable bearing capacity of supporting soil inferred by the rule based system for selection of foundation type, called SOFTEX, are transferred to a structural design program for building foundation. The allowable bearing capacity is calculated with N values of Standard Penetration Test. The foundation types such as independent spread footing, wall footing, combined footing and mat foundation can be inferred by the foundation merge procedure developed in this study. This procedure is based on the analysis data from the super structure and the estimated bearing capacity. By using this integrated system, structural engineers with less experience in foundation design can design the foundation system for the given superstructure and the site condition with relative ease.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.6
• /
• pp.300-306
• /
• 2015

For an asymmetric scroll compressor for heat pump application, a numerical simulation was carried out to investigate the effects of injection port design on the compressor's performance under gas injection. To validate the simulation, the numerical results were compared with experimental results obtained from a scroll compressor with a base injection port design. There was good agreement between simulation and experimental results, with around a 1% difference in the injection mass flow rate when the injection pressure was below $12kgf/cm^2A$ for the heating mode. Various injection port angular positions were numerically tested to yield better injection performance. The largest improvement in heating capacity was obtained at angles of $240^{\circ}$ and $200^{\circ}$ inward from the scroll wrap end angle for low-temperature and standard heating conditions, respectively, while the maximum COP improvement was at $365^{\circ}$ and $280^{\circ}$, respectively. A considerable improvement in cooling capacity was also found at the injection port angle of $240^{\circ}$.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.2
• /
• pp.60-68
• /
• 2000

This paper describes a design methodology for the CMOS current source which can be implemented in standard memory process. The proposed techniques provide a good characteristic against the power-supply variation by utilizing a self-bias circuit and the reduction of the first-order component of the temperature variation through the new temperature compensation technique and include a new current-sensing start-up circuit enabling a robust operation against the voltage noise generated during the operation of the chip. In addition to the circuit-design technology, techniques where the proposed CMOS current-reference circuit can be applied to the clocking circuits of a very high-speed DRAM are presented. The feasibility of the suggested design methodology for the CMOS current reference is demonstrated by both the analytical method and the circuit simulation.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.200-207
• /
• 2006

A new formal standardization methodology of the structural design document information is proposed in this paper. The standardization process is divided into three steps: pre-process of the collected sample document (CSD), construction of the document structure, and definition of the occurrence of each element in the document. During the pre-process, the detail document contents in the CSD are indexed with templates defined in this study, and the indexed CSD is translated into XML Schema (XSD) formal Afterwards the degree of confidences of all elements between the temporary standard document (TSD) and the translated CSD are calculated by using the XML schema matching algorithm; the TSD is then updated. This second step is repeated until all of the CSD are compared. In the final step, the common elements and unbounded elements are extracted by determining the occurrence of the temporary document elements, and the standardized document schema is exported in the XSD format. The case study dealing with the structural calculation documents show that the ,proposed methodology can be effectively used to build a XML -based information model of structural design documents.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.4
• /
• pp.135-140
• /
• 2005

Thermal-fluid analysis was performed to understand the thermal behavior in the horizontal CVD reactor thereby to design a susceptor which has a uniform deposition rate during silicon EPI growing. Four different types of susceptor designs, standard (no hole susceptor), hole $\sharp$1 (240 mm), hole $\sharp$2 (150 mm) and hole $\sharp$3 (60 mm), were simulated by CFD (Computational Fluid Dynamics) tool. Temperature, gas flow, deposition rate and growth rate were calculated and analyzed. The degree of flatness of EPI wafer loaded on the susceptor was computed in terms of silicon growth rate. The simulation results show that the temperature and thermal distribution in the wafer are greatly dependent on inner diameter of hole susceptor and demonstrate that the introduction of hole in the susceptor can degrade wafer flatness. Maximum temperature difference appeared around holes. As the diameter of the hole decreases, flatness of the wafer becomes poor. Among the threes types of susceptors with the hole, optimal design which resulted a good uniform flatness ($5\%$) was obtained when using hole $\sharp$1.