• 국제물리치료학회지
• /
• 제10권2호
• /
• pp.1750-1755
• /
• 2019

Background: Most of the previous researches on the abnormality of breathing pattern have focused on the silence of functional movements owing to such abnormality, however, have not been clearly identified the relationship between the abnormal breathing pattern on one hand and kinesiophobia and flexion relaxation phenomenon (FRP) on the other hand. Objective: To compare patients with chronic low back pain (CLBP) and healthy person in the abnormality of breathing pattern, kinesiophobia, and FRP during flexion and extension of the trunk. Design: Case-control study. Methods: The research subjects consisted of a group of 15 healthy adults and another group of 15 patients with CLBP. Capnography was used to measure the endtidal $CO_2$ ($EtCO_2$) and respiratory quotient (RQ). The muscle activity of multifidus and erector spinae of the subjects was measured during flexion and extension of the trunk to identify their FRP. The Nijmegen Questionnaire (NQ) and Tampa Scale of Kinesiophobia (TSK) were utilized to measure their breathing patterns and kinesiophobia, respectively. The Kolmogorov-Smirnov (K-S) test was conducted in order to analyze the normal distribution of the measured data. Their general characteristics were identified by the descriptive statistics and the independent t-test was performed to identify the differences between the two groups in terms of abnormality of breathing pattern, kinesiophobia, and FRP. The level of significance was set at ${\alpha}=.05$. Results: The patients with CLBP had significantly less $EtCO_2$ and shorter breathing hold time (BHT) than normal healthy person (p<.05). The patient with CLBP also had significantly greater kinesiophobia than healthy person (p<.05), and had less FRP than the healthy person (p<.01). Conclusions: These results suggest that the CLBP had greater abnormality of breathing pattern and kinesiophobia with less FRP than healthy person.

• Journal of Astronomy and Space Sciences
• /
• 제39권2호
• /
• pp.43-50
• /
• 2022

The unified scheme of Seyfert galaxies hypothesizes that the observed differences between the two categories of Seyfert galaxies, type 1 (Sy1) and type 2 (Sy2) are merely due to the difference in the orientation of the toroidal shape of the obscuring material in the active galactic nuclei. We used in this paper, a sample consisting of 120 Seyfert galaxies at 1.40 × 10⁹ Hz in radio, 2.52 × 10¹⁷ Hz in X-ray and 2.52 × 10²³ Hz in γ-ray luminosities observed by the Fermi Large Area Telescope (Fermi-LAT) in order to test the unified scheme of radio-quiet Seyfert galaxies. Our main results are as follows: (i) We found that the distributions of multiwave luminosities (L_radio, L_X-ray, and L_γ-ray) of Sy1 and Sy2 are completely overlapped with up to a factor of 4. The principal component analysis result reveals that Sy1 and Sy2 also occupy the same parameter spaces, which agrees with the notion that Sy1 and Sy2 are the same class objects. A Kolmogorov-Smirnov test performed on the sub-samples indicates that the null hypothesis (both are from the same population) cannot be rejected with chance probability p ~ 0 and separation distance K = 0.013. This result supports the fact that there is no statistical difference between the properties of Sy1 and Sy2 (ii) We found that the coefficient of the best-fit linear regression equation between the common properties of Sy1 and Sy2 is significant (r > 0.50) which plausibly implies that Sy1 and Sy2 are the same type of objects observed at different viewing angle.

• 대한치과기공학회지
• /
• 제44권2호
• /
• pp.31-37
• /
• 2022

Purpose: The aim of this study was to evaluate the accuracy of provisional crowns manufactured using a milling machine and a digital light processing (DLP) printer. Methods: A full-contour crown was designed using computer-aided design software. Provisional crowns of this design were manufactured using a milling machine and using a DLP three-dimensional (3D) printer (N=20). The provisional crowns were digitized with an extraoral scanner, and 3D deviation analysis was applied to the scanned data to confirm their accuracy. An independent t-test was performed to detect the significant differences, and the Kolmogorov-Smirnov test was used for analysis (α=0.05). Results: No significant differences were found among the precision of marginal surface between the printed and milled crowns (p=0.181). The trueness of marginal and internal surfaces of the milled crowns were statistically higher than those of the printed crowns (p=0.024, p=0.001; respectively). Conclusion: The accuracy of provisional crowns manufactured using a milling machine and a 3D printer differed significantly except with regards to the precision of the internal surface. However, all the crowns were clinically acceptable, regardless of the manufacturing method used.

• Journal of Korean Neurosurgical Society
• /
• 제66권2호
• /
• pp.190-198
• /
• 2023

Objective : Low back pain (LBP) is a global health problem that affects the productivity of the patients. Several factors such as individual, occupational, and psychosocial factors increase the risk of LBP. However, only a few studies investigated those factors, especially in middle adulthood in Indonesia. Indonesia is a country with a young population that has been rapidly developing in recent years. This study was conducted to find out the factors associated with LBP in middle adulthood. Methods : This study is a cross-sectional observational analytic study using a convenience sampling method with a total sample of 3005 respondents. Data were collected using a questionnaire which was then analyzed using the chi-square test, Kolmogorov-smirnov, Spearman's Rank, and logistic regression test. Results : From the result of this study, it was found that the 12-month prevalence of LBP in middle-aged adults was 44,29%. Female (odds ratio [OR], 1.3; 95% confidence interval [Cl], 1.098-1.545; p=0.002), lack of physical exercises (OR, 0.87; 95% Cl, 0.794-0.959; p=0.005), high body mass index (OR, 1.09; 95% Cl, 1.009-1.187; p=0.002), stress level (OR, 1.26; 95% Cl, 1.088-1.458; p=0.002), and years of work experience (OR, 1.1; 95% Cl, 1.001-1.225; p=0.047) were determined as risk factors that significantly associated with LBP. Conclusion : LBP is quite common among middle-aged adults in Indonesia. Female gender, higher body mass index, lack of physical activity, stress level, and years of work experience were all potential risk factors for LBP in middle-aged adults. Middle-aged adults in Indonesia should be aware of LBP and avoid disabilities by identifying risk factors that may worsen LBP in the future.

• 한방재활의학과학회지
• /
• 제31권4호
• /
• pp.157-166
• /
• 2021

Objectives This study is designed to evaluate the safety of Bojungikgi-tang soft extract in healthy male volunteers. Methods 12 healthy male volunteers were recruited and this study was carried out by a single center. Laboratory test results, vital signs of the volunteers were collected to evaluate safety. According to registration order, the 12 subjects were allocated by serial number. To evaluate safety, blood samples were taken and vital signs were checked 4 times - screening, pre administration, post administration and follow up-during the whole trial. The difference between pre (before medication [0 hr]) and post-administration (after medication [48 hr]) variables was summarized as mean±standard deviation. The normality test was performed using the Kolmogorov-Smirnov test and Shapiro-Wilk test. When the normality is satisfied, the paired t-test is applied. Otherwise, the non-parametric method, Wilcoxon signed rank test is applied. The significance level was p<0.05. The incidence of all adverse effects are shown in percentage. Results In the case of red blood cell, hemoglobin, hematocrit, lymphocytes, neutrophils, protein, γ-glutamyl transpeptidase values, the normality test result of the variable for the difference value before and after the dosing has a significance level <0.05. But most of values did not deviate from the normal range, and the deviation from the normal range could not be regarded as the significance associated with this clinical trial. And adverse event wasn't observed associated with the clinical trial drug. Conclusions Bojungikgi-tang soft extract were considered to be safe for healthy male volunteers.

• 대한치과보철학회지
• /
• 제61권3호
• /
• pp.179-188
• /
• 2023

목적. 이 연구의 목적은 알루미나 입자 공기분사 및 프라이머 표면처리가 각각 두 가지 종류의 지르코니아(3 mol% yttria-stabilized tetragonal zirconia polycrystal; 3Y-TZP, 5 mol% partially stabilized zirconia; 5Y-PSZ)와 레진시멘트의 전단응력에 미치는 영향을 평가하는 것이다. 재료 및 방법. 완전 소결된 14.0×14.0×2.0 mm 크기의 두가지 다른 종류의 지르코니아 시편(3Y-TZP, 5Y-PSZ)을 각각 40개씩 제작하고 400, 600, 800 그릿의 실리콘 카바이드 종이로 연마 후 에폭시 레진에 매립하였다. 이들을 각각 4개의 대조군, 50 ㎛ 알루미나 입자 공기분사 사용군, 프라이머 사용군, 50 ㎛ 알루미나 입자 공기분사와 프라이머로 표면을 처리한 한 후 레진시멘트(PANAVIA V5)로 접착하였다. 그 후 증류수(37℃)에 24시간 보관 후 전단결합강도 실험을 시행, Kolmogorov-Smirnov & Shapiro-Wilk test를 사용해서 정규성을 확인한 후, 모수적 방법인 이원배치분산분석을 사용하여 지르코니아 종류 및 표면처리 방법에 따른 전단결합강도의 상호작용 및 통계적 차이를 분석하였다. 이후 Dunnett T3를 이용해 사후검정을 하였다. 결과. 이배치분산분석 결과 지르코니아 종류에 따른 전단결합강도는 각 군간에 유의미한 차이를 보이지 않았지만(P > .05), 표면처리 방법에 따른 전단결합강도는 50 ㎛ 알루미나 입자 공기분사 사용군, 프라이머 사용군, 50 ㎛ 알루미나 공기 분사와 프라이머를 사용한 군에서는 유의미한 상관관계를 보였다(P < .05). Dunnett T3 사후검정 결과 지르코니아의 종류에 상관없이 전단결합강도는 샌드블라스팅 & 프라이머 > 프라이머 > 샌드블라스팅 > 대조군 순서로 나타났다(P < .05). 결론. 본 연구 결과에 따르면 지르코니아 종류에 따른 전단결합 강도 차이는 없었다. 지르코니아 표면의 기계적 화학적 표면처리를 동시에 했을 때 가장 높은 전단결합강도를 보였다.

• 한국수자원학회논문집
• /
• 제42권10호
• /
• pp.857-866
• /
• 2009

본 연구에서는 전국의 30년 이상의 강우관측기록을 보유하고 있는 기상청 산하 56개 강우관측소의 연 최대치 강우자료들로부터 확률분포형에 대하여 모멘트법, 최우추정법, 확률가중모멘트법을 이용하여 모수를 추정하고, 그 모수의 범위와 확률변수의 범위에 대한 적정성을 알아보았다. 적정성이 있는 모수를 대상으로 적합도 검정법인 x$^2$-검정, K-S검정, Cramer von Mises (CVM)검정, Probability Plot Correlation Coefficient (PPCC) 검정을 실시한 결과 중, 최근 연구에서 많이 이용되고 있고 표본자료의 크기가 작거나 왜곡된 자료일 경우에도 비교적 안정적인 결과를 얻을 수 있는 확률가중모멘트법과 상관계수에 의한 검정인 PPCC검정을 통과한 분포형을 우선적으로 적합도 평가 대상 분포형으로 선정하였다. 선정된 분포형을 대상으로 적합도 평가기준인 SLSC, MLL, AIC를 적용하여 적합도 평가를 실시하여 대표확률분포형 후보군을 추출하였다. 대표확률분포형 후보군으로 선정된 확률분포형에 대하여 resampling방법인 Jackknife기법을 적용하여 변동성을 파악하고, 변동성이 가장 작게 나타난 분포형을 그 지점의 대표확률분포형으로 결정하였다. 본 논문에서는 분석 결과의 분량을 감안하여 대표적으로 서울, 강릉, 대구, 전주, 부산 지점에 대해 작성하였으며, 확률강우량의 변동성이 가장 작은 확률분포형을 56개 지점의 각 지점 대표확률분포형으로 제시하였으며, Gumbel 분포(GUM)의 선정 비율이 지속기간 12시간, 24시간에 대해 각각 41 %, 32 %로 가장 높게 나타났다. 본 연구에서는 적합도 평가를 함에 있어서 객관적 정량화가 가능한 세 가지 기준과 Jackknife기법을 이용한 새로운 확률분포형 선정의 가능성을 제시하였다.

• 한국항해항만학회지
• /
• 제43권3호
• /
• pp.186-196
• /
• 2019

선박의 접안과정 중 발생하는 접안에너지는 접안속도와 밀접한 관계가 있다. 접안속도가 과다할 경우 선박 및 부두에 손상이 발생하는 접안사고로 이어질 수 있으므로 적절한 접안속도를 설계하는 것이 중요하다. 선박접안속도의 경우, 일반적으로 대수정규분포를 따른다고 가정하고 있으나 국내에서는 이에 대한 검증이나 연구가 없어 해외의 사례를 바탕으로 설계접안속도를 설정하고 있는 상황이다. 이에 본 연구에서는 부두의 선박접안속도 분석을 통계학적으로 접근하여 실측데이터와 확률분포를 비교하여 가장 적합한 확률분포를 찾고자 하였다. 적합도 검정으로는 K-S(Kolmogorov-Smirnov) 검정, A-D(Anderson-Darling) 검정, Q-Q(Quantile-Quantile) 플롯 등을 이용하여 접안속도 실측치 분포에 적합한 확률분포를 확인하였다. 분석 결과, 접안속도의 빈도분포는 선박의 재화상태에 따라 만재 시, 대수정규분포, 경하 시에는 와이블분포와 적합함을 확인하였다. 또한 적합도 검정 결과를 이용하여 초과확률에 해당하는 접안속도 예측치를 산출하였다. 이 예측값과 해당 부두의 설계접안속도와 비교 해본 결과, 예측값이 설계값을 크게 초과함을 확인하였다. 이를 통해 설계 시의 접안속도가 현실과 맞지 않게 다소 낮게 설정되어 있음을 알 수 있으며, 이 결과를 바탕으로 적정 설계접안속도 산정법 개선에 기여할 수 있을 것으로 기대된다.

• 한국농공학회논문집
• /
• 제63권4호
• /
• pp.87-96
• /
• 2021

Determining design rainfall is the first step to plan an agricultural drainage facility. The objective of this study is to evaluate whether the current method for parameter estimation is reasonable for computing the design rainfall. The current Gumbel-Kendall (G-K) method was compared with two other methods which are Gumbel-Chow (G-C) method and Probability weighted moment (PWM). Hourly rainfall data were acquired from the 60 ASOS (Automated Synoptic Observing System) stations across the nation. For the goodness-of-fit test, this study used chi-squared (𝛘²) and Kolmogorov-Smirnov (K-S) test. When using G-K method, 𝛘² statistics of 18 stations exceeded the critical value (𝑥²_a=0.05,df=4=9.4877) and 10, 3 stations for G-C method, PWM method respectively. For K-S test, none of the stations exceeded the critical value (D^a=0.05_n=0.19838). However, G-K method showed the worst performances in both tests compared to other methods. Subsequently, this study computed design rainfall of 48-hour duration in 60 ASOS stations. G-K method showed 5.6 and 6.4% higher average design rainfall and 15.2 and 24.6% higher variance compared to G-C and PWM methods. In short, G-K showed the worst performance in goodness-of-fit tests and showed higher design rainfall with the least robustness. Likewise, considering the basic assumptions of the design rainfall estimation, G-K is not an appropriate method for the practical use. This study can be referenced and helpful when revising the agricultural drainage standards.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2006년도 추계 종합학술대회 논문집
• /
• pp.403-407
• /
• 2006

본 연구는 매년 우리나라에 막대한 인명과 재산의 피해를 입히는 홍수 피해를 공학적인 측면에서 저감시키고자 한다. 이러한 항구적인 홍수 대책 수립을 위해 본 연구에서는 각종 댐 및 수리구조물의 설계지침인 설계홍수량을 분석함으로서 향후 우리나라 수리구조물의 안정적인 설계 지침을 제공하는데 있다. 본 연구는 한국의 기후학적 지형학적 특성을 고려한 동질한 지역으로 구분하였으며 L-모멘트비와 K-S 검정에 의해 적용분포의 적합성 검정을 실시한 결과 GEV분포가 절절한 것으로 판단되었다. 지점빈도분석과 지역빈도 분석의 결과를 비교하기 위해 Monte Carlo 모의를 실시하였고 최종적으로 적정 설계홍수량을 선정하기 위해 오차분석을 실시하였다. 그 결과 지역빈도분석에 의한 설계홍수량이 적정한 것으로 판단되었다.