• Journal of Electrical Engineering and Technology
• /
• v.3 no.3
• /
• pp.385-390
• /
• 2008

For taking account of the two-dimensional magnetic properties of a grain-oriented electrical steel sheet, the effective anisotropic tensor reluctivity is examined, and a computationally efficient algorithm is suggested by using the response surface method to model the two-dimensional magnetic properties. It is shown that the reconstructed two-dimensional magnetic properties are fairly effective to stabilize the convergence characteristics of the Newton-Raphson iteration in the nonlinear magnetic field analysis.

• Advances in materials Research
• /
• v.4 no.3
• /
• pp.179-192
• /
• 2015

The study presents a preliminary investigation on the applicability of Shirasu (a pyroclastic flow deposit characterized by high percentage of volcanic glass) in geopolymer. Comparative study on compressive strength and internal pore structure has been done between geopolymers with alkali activated Shirasu and fly ash as aluminosilicates. Mortar mix proportions are selected based on variations in ratio of alkaline activators to aluminosilicate and also on silica to alkali hydroxide ratio. From the experimental study, Shirasu geopolymer exhibited fairly good compressive strength. Mix proportion based on silica to alkali hydroxide ratio is observed to have profound effect on strength development.

• Journal of Powder Materials
• /
• v.5 no.4
• /
• pp.303-311
• /
• 1998

Hard materials such as hardmetal, coated hardmetal, cermet, ceramics and diamond or c-BN sintered compact are a kind of grain-dispersed alloy with high volume of hard particles. These are used for cutting tools, wear-resistant tools, rock bits, high pressure apparatus, etc. The annual production in Japan is about 1.7 billion dollars (200 billion yen). This is greatly owed to the development in science and technology which has been accomplished by applying new concepts such as fine or uniform grain microstructure, orientation of crystal grains, functionally graded material, artificial lattice and coherent bonding in recent years. In this review, the development in recent years in Japan is briefly summarized.

• Bulletin of the Korean Mathematical Society
• /
• v.33 no.3
• /
• pp.455-463
• /
• 1996

In [3] and [4], Kitahara, Pak and the author obtained the conformally invariant tensor $B_0$, which is an algebraic Hermitian analogue of the Weyl conformal curvature tensor W in the Riemannian geometry, by the decomposition of the curvature tensor H of the Hermitian connection and the notion of semi-curvature-like tensors of Tanno (see[7]). In [5], the author defined a conformally invariant tensor $B_0$ on a Hermitian manifold as a modification of $B_0$. Moreover he introduced the notion of local conformal Hermitian-flatness of Hermitian manifolds and proved that the vanishing of this tensor $B_0$ together with some condition for the scalar curvatures is a necessary and sufficient condition for a Hermitian manifold to be locally conformally Hermitian-flat.

• Journal of Microbiology and Biotechnology
• /
• v.5 no.5
• /
• pp.274-279
• /
• 1995

Ethyl caproate, one of the major flavor compounds deciding the quality of sake (Japanese wine), is produced during the brewing by the action of alcohol acyltransferase and esterases of sake yeast and koji mold. Extracellular esterases of Aspergillus oryzae required for ethyl caproate synthesis were purified partially. The enzymes had different optimum pH and affinity toward substrates. Substrate preferences and inhibition features showed the three enzymes to be B-type esterases or carboxylesterases (EC 3.1.1.1).

• Microbiology and Biotechnology Letters
• /
• v.25 no.2
• /
• pp.203-206
• /
• 1997

Takju is a traditional alcoholic beverage that has been prepared by fermenting the cooked rice and Nuruk (Korean-style bran koji). During fermentation. bacterial contamination is a problem which inhibits the growth of yeast and thus lowers the ethanol production from starch of rice, and causes souring. Major contaminants were known to be gram-positive acid producers at the early stage of fermentation. This problem would be solved if the contaminated bacteria could be controlled. Nisin, a GRAS-grade preservative, was added at the level of 500 iu/g as it retards the growth of the gram-positive bacteria. It was possible to control acid and ethanol production during fermentation. This process increased the ethanol production by 2 % comparing with control.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.170-173
• /
• 2004

When the data from the artificial satellite is analyzed, recent years it is perceived to vegetation index using BRF(Bi-directional Reflectance Factor) of the observation target. To make the BRF models, it is important to measure the 3D structure of the observation target actually. In this study, it is proposed to the observation technique by using multi-angle stereo pair image, and shown the observation result in grassland area. Also, our team has been operating the radio controlled helicopter which can fly over the tall forest canopy and it can be equipped the measurement system.

• Journal of environmental and Sanitary engineering
• /
• v.22 no.1 s.63
• /
• pp.37-47
• /
• 2007

In order to improve the Quality of fermented soybean Doenjang was investigated. The samples were prepared and fermented by the koji made with A. oryzae, B. subtilis and B. natto strains, that the product added green tea powder with sanitary canned food. 1. The water content of sample was 50.30-42.14%, pH value 6.03-5.52 and total acidity, 3.01-3.87. 2. The reducing sugar content for samples was 9.35-7.81%, Amino-N, 7.96-9.21%. 3. In the sensory evaluation test, the good sensory qualify that was S-2 sample than to S-1 and S-3. 4. The heavy metals analyzed from sample cans, tin, iron and lead content were 27.31-29.04 ppm, 5.32-5.91 ppm and trace amount.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.326-326
• /
• 2006

The combination of living anionic and coordination polymerization techniques enabled to synthesize the polystyrene-b-polyisoprene-b-poly (butyl isocyanate) triblock polymers. Their microphase-separated structures were zig-zag structures for high ${\phi}_{PIC}$ samples, and hockey-puck structures were also observed. The phase diagram for PSt-b-PIp-b-PIC rod-coil polymers was different from that for PS-PBd-PMMA triblock polymers, and it was found that ${\phi}_{PIC}$ was the important factor to determine the microphase-separated structures.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2003.05a
• /
• pp.163-170
• /
• 2003

In this study, paying much attention to notable features obtained from spatial distributions of strongly related indices (precipitable water, convergence of air, convective available potential energy) with precipitation, fatal problems in selecting strongly related indices with observed precipitation in a BAIU season were discussed. These results showed spatial distribution of a predicted index provided alternative and physically consistent interpretation for selecting dominant index for heavy rainfall even if the predicted index did not correlate with observed rainfall at a specific observational point as confirmed by the features of CONV (Convergence) or even if it correlated with observed rainfall as confirmed by those of PW (Precipitable Water). Therefore, dominant meteorological indices of heavy rainfall should be selected according to physically evidenced interpretation on features of spatial distributions of indices, and physically and statistically consistent relationship should be built up.