Journal of Powder Materials (한국분말재료학회지)

The Korean Powder Metallurgy & Materials Institute (한국분말재료학회 (*구 분말야금학회))
권호 표지

Recent Development of Science and Technology of Hard Materials in Japan

  • Hayashi, Koji (Institute of Industrial Science, The University of Tokyo)
  • Published : 1998.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

Hard materials such as hardmetal, coated hardmetal, cermet, ceramics and diamond or c-BN sintered compact are a kind of grain-dispersed alloy with high volume of hard particles. These are used for cutting tools, wear-resistant tools, rock bits, high pressure apparatus, etc. The annual production in Japan is about 1.7 billion dollars (200 billion yen). This is greatly owed to the development in science and technology which has been accomplished by applying new concepts such as fine or uniform grain microstructure, orientation of crystal grains, functionally graded material, artificial lattice and coherent bonding in recent years. In this review, the development in recent years in Japan is briefly summarized.

Keywords

References

  1. Product Specification of Tokyo Tungsten Co., Ltd. Ultra fine SC powder producted by direct carburization Y.Yamamoto
  2. Product Specification of Tokyo Tungsten Co., Ltd. Yery fine homogeneous VC andCr₃Cr₂powders producted by directed carburization Y.Ymamoto
  3. Product Specificaion of Japan Mew Metals(Nihon Shinkinzoku) Co., Ltd. New fine TiN powders S.Morita
  4. J.Japan.Soc.Posder and Poser Metall.;submitted v.45 N.Asada;T.Lgarashi;A.Doi;K.Hayashi
  5. Product Specification of Sumittiomo Electric Co,. Ltd. Functionally gradid cemented carbide A.Ikegaya
  6. Product Specificationof Toshiba Tungalloy Co., Ltd. Disk-ytpe WC reinforced cemented caebides M.Ueki
  7. Product Specification of Fujitsu Sinter Co,. Ltd. Non-magnetic cemented-Carbide T.Sakai
  8. Product Specification of NACHI (Fujikishi)Co., Ltd. Extreme fine wires of hardmetals T.Yoshimoto
  9. Product Specification of Fuji Dies Co., Ltd. HARDTAP O.Terada
  10. Japan Inst.Posder and P/M v.44 H.Miura(et al.)
  11. Japan Inst.Posder and P/M v.44 E.Sentoki(et al.)
  12. Product Specification of COBELCO(Kobe Seiko) Co., Ltd. (Al,TiN)coatings promising alternative to TiN S.Kanumaru
  13. Product Specification of Hitachi Tool. Co., Ltd Hardmetal CVD-coated with α-AI₂1₃ N.Shima
  14. Product Specification of Mitsubishi Material Co., Ltd. UE6005 T.Tanase
  15. Product Specification of Sumitomo Electric Co., Ltd. ZX Coating(Superlattics of Tin/AIN) A.Ikegaya
  16. Private Communication TAc Filament for CVD H.Matsubara
  17. Product Specification of Mitsbishi Material Co., Ltd. Micro-grained cermet NX2525 T.Tanse
  18. Product Specification of Tokyo Kohan Co., Ltd. Ternary boride base cermets producted by reaction boronizing sintering K.tagagi
  19. Product Specification of Asia Glass Co., Ltd. UD-Ⅱ is a new heat resistant material K.Hamashima
  20. Product Specification of Nippon Tunsten Co., Ltd. Sintered β-titaniumbased hard alloy S.Sakaguchi
  21. Product Specification of DUET Industrial Co., Ltd. Extra High Hardness; WC based veramics CW500 T,Yamamoto
  22. Product Specification ofAsahi Glass Co., Ltd. Sepre silicon nitride K.Hamashima
  23. Product Specification of NTK(Nippon Tungsten Tokyo) Co., Ltd. High strength silicon nitride S.NOzaki
  24. Product Specification of Mitsbishi Material Co., Ltd. Heat resistant diamond sintered compack T.Tanse
  25. Product Specification of Tomei Diamond Co., Ltd. PCD Coated lathe center blanks S.Tanaka;Oyama
  26. Mater.Sci.Eng. v.A209 Y.Yanaba;K.Hayashi
  27. J.Japan Inst. Powder and P/M v.44 Y.Yanaba;K.Hayashi
  28. J.Japan Inst. Posder and P/M v.45 Inverse Manufacturing Labo;accepted K.Nishiyama
  29. Proc. of 14th Int. Plansee Seminar '97 v.2 Plansee AG.,.RWF,Werbegesellscaft m.b.H.Watterns N.Matsouka;K.Hayashi;F.Kneringer(ed.);P.Rodhammer(ed.);P.Wilhartitz(ed.)
  30. Monte Carlo simulation of grain growth H.Matsubara
  31. Inverse Manufacturing Labo