• Plant Biotechnology Reports
• /
• 제2권3호
• /
• pp.179-189
• /
• 2008

We established an efficient plant regeneration system for Catharanthus roseus L. (G.) Don through somatic embryogenesis. Embryogenic callus was induced from hypocotyl of seed germinated in vitro. Somatic embryogenesis in Catharanthus has been categorized into three distinct stages: (1) initiation and proliferation of embryo; (2) maturation, and; (3) germination or plantlet conversion. Beside plant growth regulators, various stages of embryogenesis were screened for their response to a wide variety of factors (pH, gelrite, light, sugar alcohols, polyethyleneglycol and amino acids), which affect embryogenesis. All of the tested factors had a small to marked influence on embryogeny and eventual conversion to plantlets. The plantlets were acclimatized successfully in a greenhouse. To our knowledge, this is the first report describing a detailed study of various cultural factors which regulate embryogenesis in C. roseus. The results discussed in this paper may be used in mass propagation to produce medicinal raw material, and the embryo precursor cells could be used in genetic modification programmes that aim to improve the alkaloid yield as well.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2009년도 춘계 종합학술대회 논문집
• /
• pp.748-753
• /
• 2009

최근 급속한 기술의 발전과 더불어 연구개발 산출물도 상당량 발생을 하고 있다. 종전의 데이터베이스 구축 방식으로는 방대한 산출물을 디지털 아카이브하기엔 많은 시간과 비용을 초래한다. 또한 기술 및 지식사회가 되어감에 따라 국가R&D보고서 콘텐츠도 다양한 전문서비스가 가능하도록 웹서비스 개발이 요구되고 이를 충족시키기 위해 전문서비스가 가능한 E-Book 형태로 가공하는 절차가 필요하다. 본 논문에서는 국가R&D보고서의 E-Book을 정의하고 효율적인 가공절차를 수용하는 변환 모델 및 관련 시스템 구축에 대해 논의한다.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• 제6권1호
• /
• pp.44-50
• /
• 2003

If the accelerometers are used in measuring the response, the absolute values of the velocity and displacement are not usually obtainable because their initial values are not accounted for in the integration of the acceleration response. A new dynamic response conversion algorithm of both the time domain and the frequency domain is proposed for the problem in estimating the displacement data by defining the transformed responses. In this algorithm, the displacement response can be obtained from the measured acceleration records by integration without requiring the knowledge of the initial velocity and displacement information. The applicability of the technique is tested by an example problem using the real bridge's superstructure under several cases of moving load. In the response conversion procedure of the frequency domain, the identified response according to the frequency can be estimated by changing over the limits of integration. If the reliability of the identified responses is ensured, it is expected that the proposed method for estimating the impact factor can be useful in the bridge's dynamic test. This method can be useful in those practical cases when the direct measurement of the displacement is difficult as in the dynamic studies of huge structure.

• 전기화학회지
• /
• 제13권3호
• /
• pp.157-162
• /
• 2010

The electrodes comprising nano-sized $LiFePO_4$, carbon black and binder are prepared with two different Al current collectors. One is the generally used normal Al foil and the other is the chemically etched Al foil. Surface characteristics of each Al foil and electrochemical performance of the cathodes using each foil are investigated. The electrode from the etched Al foil exhibits better physical and electrochemical properties as compared to those of the normal Al foil because the etched Al foil has rough surface with sub-micron pores which improve the adhesion between the electrode materials and the substrate. The electrode on the etched Al foil has such a strong peel strength that the impedance is smaller than that of normal one. Indeed the $LiFePO_4$ electrode from the etched Al foil exhibits a better rate capability and remains intact even after storage for 1 week at the charged state at the elevated temperature $60^{\circ}C$.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(4)
• /
• pp.5-8
• /
• 2001

We propose a realtime numeric caption recognition algorithm that automatically recognizes the numeric caption generated by computer graphics (CG) and displays the modified caption using the recognized resource only when a valuable numeric caption appears in the aimed specific region of the live sportscast scene produced by other broadcasting stations. We extract the mesh feature from the enhanced binary image as a feature vector after acquiring the sports broadcast scenes using a frame grabber in realtime and then recover the valuable resource from just a numeric image by perceiving the character using the neural network. Finally, the result is verified by the knowledge-based rule set designed for more stable and reliable output and is displayed on a screen as the converted CC caption serving our purpose. At present, we have actually provided the realtime automatic mile-to-kilometer caption conversion system taking up our algorithm f3r the regular Major League Baseball (MLB) program being broadcasted live throughout Korea over our nationwide network. This caption conversion system is able to automatically convert the caption in mile universally used in the United States into that in kilometer in realtime, which is familiar to almost Koreans, and makes us get a favorable criticism from the TV audience.

• 전기학회논문지P
• /
• 제61권4호
• /
• pp.186-191
• /
• 2012

DC Bus Electrolytic capacitors have been widely used in power conversion system because they can achieve high capacitance and voltage ratings with volumetric efficiency and low cost. This type of capacitors have been traditionally used for filtering, voltage smoothing, by-pass and other many applications in power conversion circuits requiring a cost effective and volumetric efficiency components. Unfortunately, electrolytic capacitors are some of the weakest components in power electronic converter. Many papers have proposed different methods or algorithms to determinate the ESR and/or capacitance C for fault diagnosis of the electrolytic capacitor. However, both ESR and C vary with frequency and temperature. Accurate knowledge of both values at the capacitors operating conditions is essential to achieve the best reference data of fault judgement. According to parameter analysis, the capacitance increases with temperature and the ESR decreases. Higher frequencies make the ESR and C to decrease. Analysis results show that the proposed electrolytic capacitor parameter estimation technique can be applied to reference signal of capacitor diagnosis systems successfully.

• Korean Chemical Engineering Research
• /
• 제50권2호
• /
• pp.223-228
• /
• 2012

ABS와 폴리에틸렌(Polyethylene, PE) 및 ABS-PE 혼합물의 저온열분해를 회분식 반응기를 이용하여 상압 및 $450^{\circ}C$에서 실행하였다. 열분해 시간은 20~80분까지 하였고 열분해로 생성된 성분은 지식경제부에서 고시한 증류성상온도에 따라 가스, 가솔린, 등유, 경유, 중유로 분류하였다. ABS와 PE의 혼합 폐플라스틱의 열분해 전환율은 PE의 함량이 증가할수록 증가하는 것으로 나타났다. 열분해생성물의 수율은 PE의 함량이 높을수록 중유 > 가스 > 가솔린 > 경유 > 등유 순으로 회수되었다.

• 말소리와 음성과학
• /
• 제7권3호
• /
• pp.139-149
• /
• 2015

This paper aims to analyze pronunciation variations of loanwords produced by Korean and improve the performance of pronunciation modeling of loanwords in Korean by using syllable-based segmentation and phonological knowledge. The loanword text corpus used for our experiment consists of 14.5k words extracted from the frequently used words in set-top box, music, and point-of-interest (POI) domains. At first, pronunciations of loanwords in Korean are obtained by manual transcriptions, which are used as target pronunciations. The target pronunciations are compared with the standard pronunciation using confusion matrices for analysis of pronunciation variation patterns of loanwords. Based on the confusion matrices, three salient pronunciation variations of loanwords are identified such as tensification of fricative [s] and derounding of rounded vowel [ɥi] and [$w{\varepsilon}$]. In addition, a syllable-based segmentation method considering phonological knowledge is proposed for loanword pronunciation modeling. Performance of the baseline and the proposed method is measured using phone error rate (PER)/word error rate (WER) and F-score at various context spans. Experimental results show that the proposed method outperforms the baseline. We also observe that performance degrades when training and test sets come from different domains, which implies that loanword pronunciations are influenced by data domains. It is noteworthy that pronunciation modeling for loanwords is enhanced by reflecting phonological knowledge. The loanword pronunciation modeling in Korean proposed in this paper can be used for automatic speech recognition of application interface such as navigation systems and set-top boxes and for computer-assisted pronunciation training for Korean learners of English.

• 대한전자공학회논문지TC
• /
• 제43권6호
• /
• pp.46-52
• /
• 2006

본 논문에서는 70-nm metamorphic high electron mobility transistor (MHEMT)와 W-band 마이크로 머시닝 링 커플러를 이용하여 낮은 변환손실 및 높은 격리특성의 94 GHz MMIC 믹서를 설계 및 제작하였다. 놀은 LO-RF 격리도 특성을 얻기 위하여 마이크로 머시닝 링 커플러를 사용한 새로운 3차원 구조의 resistive 믹서 구조를 제안하였다. 제작된 93 GHz MMIC 믹서는 94 GHz에서 8.9 dB의 낮은 변환 손실과 29.3 dB의 높은 LO-RF 격리돈 특성을 나타내었다. 본 논문에서 제안된 믹서는 기존의 보고된 W-band 대역 믹서와 비교하여 양호한 변환 손실 뿐 만 아니라 우수한 LO-RF 격리도 특성을 나타내었다.

• 전자공학회논문지
• /
• 제50권12호
• /
• pp.56-62
• /
• 2013

우리는 MOSFET Layout 단계에서 Multiplier 구성을 통한 Common centroid layout 방식을 사용한 무선 전력 전송 용 CMOS 정류회로를 제안한다. 제안하는 정류회로는 기존의 다이오드를 사용하지 않은 Cross-coupled MOSFET 정류회로로 13.56 MHz에서 동작한다. 전력 소모를 최소화하고, 높은 주파수까지 동작하기 위하여 Full bridge 정류회로에서 효율을 높이기 위한 비교기를 제거하였다. Layout 단계에서 Multiplier 구성을 통한 Common centroid layout 방식은 Chip-layout 상에서 MOSFER의 Finger에 의해 길어진 연결 선로에 존재하는 기생 직렬 저항과 병렬 Capacitor에 의해 발생하는 시간 지연을 줄이기 위해 고안되어, 천이 시간을 줄여 Cross-coupled 구조의 On-상태에서 Off-상태, 혹은 그 반대의 상태 변화를 빠르게 한다. 이는 빠른 상태 변화 시간으로 인해 전력 변환 효율을 증가시킨다. 본 정류회로는 $0.11{\mu}m$ CMOS 공정으로 제작되었으며, 전력 변환 효율은 최대 86.4%로 측정되었으며, 600 MHz 이상까지 높은 전력 변환 효율을 가지며, 이는 현재 발표된 것 중, Cross-coupled 구성을 기반으로 한 정류회로 중 가장 높은 성능을 가진다.