• Journal of Environmental Science International
• /
• v.29 no.8
• /
• pp.827-835
• /
• 2020

Zeolite material having XRD peaks of Na-A zeolite in the 2θ range of 7.18 to 34.18 can be synthesized from the waste catalyst using a fusion/hydrothermal method. The adsorption rate of Mn ions by a commercial Na-A zeolite and the synthesized zeolitic material increased as the adsorption temperature increased in the range of 10 ~ 40℃. The adsorption of Mn ion were very rapid in the first 30 min and then reached to the equilibrium state after approximately 60 min. The adsorption kinetics of Mn ions by the commercial Na-A zeolite and the zeolitic material were found to be well fitted to the pseudo-2^nd order kinetic model. Equilibrium data by the commercial Na-A zeolite and the zeolitic material fit the Langmuir, Koble-Corrigan, and Redlich-Peterson isotherm models well rather than Freundlich isotherm model. The removal capacity of the Mn ions by the commercial Na-A zeolite and the zeolitic material obtained from the Langmuir model was 135.2 mg/g and 128.9 mg/g at 30℃, respectively. The adsorption capacity of Mn ions by the synthesized zeolitic material was almost similar to that of commercial Na-A zeolite. The synthesized zeolitic material could be applied as an economically feasible commercial adsorbent.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2002.04a
• /
• pp.9-12
• /
• 2002

Diffusive transport of volatile organic compounds(VOCs) and their degradation by bacteria in unsaturated soils are couple by poorly understood mass transfer kinetics at the gas/water interface. Determination of the fate of VOCs in unsaturated soil is necessary to evaluate the feasibility of natural attenuation as a VOC remediation strategy. The objective of this study was to develop a mechanistically based mathematical model that would consider the interdependence of VOC transport, microbial activity, and sorptive interaction in a moist, unsaturated soil. Because the focus of the model was on description of natural attenuation, the advective VOC transport that is induced in engineered remediation processes such as vapor extraction was not considered. The utility of the model was assessed through its ability to describe experimental observations form diffusion experiments using toluene as a representative VOC in well-defined soil columns that contained a toluene degrading bacterium, Pseudomonas Putida, as the sole active microbial species. The coefficient for gas-liquid mass-transfer, K$\sub$LA/, was found to be a key parameter controlling the ability of bacteria to degrade VOCs. This finding indicates that soil size and geometry are likely to be important parameters in assessing the possible success of natural attenuation of VOCs in contaminated unsaturated soils.

• Journal of Mechanical Science and Technology
• /
• v.18 no.2
• /
• pp.211-220
• /
• 2004

It is well known that the geometry of the articular surface has a major role in determining the position of articular contact and the lines of action for the contact forces. The contact force calculation of the knee joint under the effect of sliding and rolling is one of the most challenging issues in this field. We present a 3-D human knee joint model including sliding and rolling motions and major ligaments to calculate the lateral and medial condyle contact forces from the recovered total internal reaction force using inverse dynamic contact modeling and the Least-Square method. As results, it is believed that the patella, muscles and tendon affect a lot for the internal reaction forces at the initial heel contact stage. With increasing flexion angles during gait, the decreasing contact area is progressively shifted to the posterior direction on the tibia plateau. In addition, the medial side contact force is larger than the lateral side contact force in the knee joint during normal human walking. The total internal forces of the knee joint are reasonable compared to previous studies.

• ALGAE
• /
• v.17 no.3
• /
• pp.187-194
• /
• 2002

A seaweed biofilter/production system of being developed to reduce the environmental impact of marine fish farm effluent in coastal ecosystems as a part of an integrated aquaculture system. Several known seaweed taxa and their cultivars have been considered as candidate biofilter organisms based on their species-specific physiological properties such as nutrient uptake kinetics and their economic value. Porphyra is an excellent cadidate and shows efficient nutrient extraction properties. Rates of ammonium uptake were maintained at around 3 ${\mu}moles{\cdot}g{\cdot}dw^{-1}{\cdot}min^{-1}$ at 150 ${\mu}M$ inorganic nitrogen at $10^{\circ}C$. Ulva is another possible biofilter candidate with an uptake rate of 1.9 ${\mu}moles{\cdot}g{\cdot}dw^{-1}{\cdot}min^{-1}$ under same conditions. A simple uptake/growth and harvest model was applied to estimate the efficiency of the biofilter/production system. The model was deterministic and used a compartment model structure based on difference equations. The efficiency of Porpyra filter was estimated over 17% of ${NH_4}^+$ removal from the contimuous supply of 100 ${\mu}mole{\cdot}l^{-1}\;{NH_4}^+\;at\;100l{\cdot}sec^{-1}$ flow rate.

• Journal of Korean Society on Water Environment
• /
• v.33 no.4
• /
• pp.441-448
• /
• 2017

Microcystis aeruginosa (M. aeruginosa) is a cyanobacterium species that can form harmful algal blooms in freshwater bodies worldwide. The use of Artemisia asiatica extracts to control M. aeruginosa inhibition will be environmentally friendly and promising. Artemisia asiatica extracts removed successfully upto 88% of M. aeruginosa pH 8 at $25^{\circ}C$ of temperature. These results was indicated that the amount of 2.24 g/L Artemisia asiatica extracts was removed 1g dryweight/L of M. aeruginosa. The kinetic data showed substrate inhibition kinetics and maximum growth rate was obtained when the M. aeruginosa was grown in medium containing 2.5 g/L of initial concentration of Artemisia asiatica extracts. In the various growth control models, Luong model showed the highest correlation coefficient of 0.9916. Therefore, the Luong model was the most suitable control model for the growth control of M. aruginosa using Artemisia asiatica extracts. In conclusion, the growth control of M. aruginosa using Artemisia asiatica extracts can be applied in the field without controlling the temperature and pH of rivers and streams, and it is possible to control the growth of M. aruginosa efficiently in a short time. The natural extract, Artemisia asiatica extracts, can be a promising inhibition due to its high efficiency and low dose requirements.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.6
• /
• pp.685-692
• /
• 2003

A numerical simulation of flame propagation in a micro combustor was carried out. Combustor has a sub -millimeter depth cylindrical internal volume and axisymmetric one-dimensional was used to simplify the geometry. Semi-empirical heat transfer model was used to account for the heat loss to the walls during the flame propagation. A detailed chemical kinetics model of $H_2/Air$ with 10 species and 16 reaction steps was used to calculate the combustion. An operator-splitting PISO scheme that is non-iterative, time-dependent, and implicit was used to solve the system of transport equations. The computation was validated for adiabatic flame propagation and showed good agreement with existing results of adiabatic flame propagation. A full simulation including the heat loss model was carried out and results were compared with measurements made at corresponding test conditions. The heat loss that adds its significance at smaller value of combust or height obviously affected the flame propagation speed as final temperature of the burnt gas inside the combustor. Also, the distribution of gas properties such as temperature and species concentration showed wide variation inside the combustor, which affected the evaluation of total work available of the gases.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.15 no.3
• /
• pp.179-184
• /
• 1982

The behavior of continuous flow culture of Lartobacillus bulgricus was investigated by application of Monod's kinetic model. The parameters obtained from Monod's chemostat theory successfully predicted the behavior of the chemostat. Then, it was found that Monod's kinetics were applicable to the growth rate dependence on glucose concentration. Under steady-state condition, the maximum growth rate, saturation constant, and wash out were found to be 0.62/hr, 7.69 g/1, 0.51/hr of continuous culture. And the optimum condition for the highest cell production was 0.41/hr in dilution rate, and at that point the cell production rate was 0.178g/1 hr.

• Korean Chemical Engineering Research
• /
• v.47 no.3
• /
• pp.373-379
• /
• 2009

Cesium carbonate was used as an adsorbent to capture carbon dioxide from gaseous stream of carbon dioxide, nitrogen, and moisture in a fixed-bed to obtain the breakthrough data of $CO_2$. The deactivation model in the non-catalytic heterogeneous reaction systems is used to analyze the sorption kinetics among carbon dioxide, carbonate, and moisture using the experimental breakthrough data. The experimental breakthrough data are fitted very well to the deactivation model than the adsorption isotherm models in the literature.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.2
• /
• pp.250-255
• /
• 2004

The aim of this work was to investigate the adsorption isotherm and kinetic model for the biosorption of lead $(Pb^{2+})$ by Rhodotorula aurantiaca and to examine the environmental factors for this metal removal. Within five minutes of contact, $Pb^{2+}$ sorption reached nearly 86% of the total $Pb^{2+}$ sorption. The optimum initial pH value for removal of $Pb^{2+}$ was 5.0. The percentage sorption increased steeply with the biomass concentration up to 2 g/l and thereafter remained more or less constant. The Langmuir sorption model provided a good fit throughout the concentration range. The conformity of these data to the Langmuir model indicated that biosorption of $Pb^{2+}$ by R. aurantiaca could be characterized as a monolayer, single-site type phenomenon with no interaction between ions adsorbed in neighboring sites. The maximum $Pb^{2+}$ sorption capacity $(q_{max})$ and Langmuir constant (b) were 46.08 mg/g of biomass and 0.04 l/mg, respectively. The pseudo second-order equation was well fitted to the experimental data. The correlation coefficients for the linear plots of t/q against t for the second-order equation were 0.999 for all the initial concentrations of biosorbent for contact times of 180 min. The theoretical $q_{eq}$ value was very close to the experimental $q_{eq}$ value.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.82.2-82.2
• /
• 2011

A channel design which is closely related with the mass transport overpotential is one of the most important procedures to optimize the whole fuel cell performance. In this study, three dimensional results of a numerical study for gas distribution in channels of a molten carbonate fuel cell (MCFC) unit cell for a 1kW class stack was presented. The relationship between the fuel and air distribution in the anode and cathode channels of the unit cell and the electric performance was observed. A charge balance model in the electrodes and the electrolyte coupled with a heat transfer model and a fluid flow model in the porous electrodes and the channels was solved for the mass, momentum, energy, species and charge conservation. The electronic and ionic charge balance in the anode and cathode current feeders, the electrolyte and GDEs were solved for using Ohm's law, while Butler-Volmer charge transfer kinetics described the charge transfer current density. The material transport was described by the diffusion and convection equations and Navier-Stokes equations govern the flow in the open channel. It was assumed that heat is produced by the electrochemical reactions and joule heating due to the electrical currents.