• 한국전문물리치료학회지
• /
• 제22권4호
• /
• pp.62-70
• /
• 2015

The aims of the current study were to assess reliability of range of motion (ROM) measurement of glenohumeral internal rotation (GIR) with a pressure biofeedback stabilization (PBS) method and to compare the reliability between manual stabilization (MS) and the PBS method. In measurement of pure glenohumeral joint motion, scapular stabilization is necessary. The MS method in GIR ROM measurement was used to restrict scapular motion by pressing the palm of the tester's hand over the subject's clavicle, coracoid process, and humeral head. The PBS method was devised to maintain consistent pressure for scapular stabilization during GIR ROM measurement by using a pressure biofeedback unit. GIR ROM was measured by 2 different stabilization methods in 32 subjects with GIR deficit using a smartphone clinometer application. Repeated measurements were performed in two test sessions by two testers to confirm inter- and intra-rater reliability. After tester A performed measurements in test session 1, tester B's measurements were conducted one hour later on the same day to assess the inter-rater reliability and then tester A performed again measurements in test session 2 for confirming the intra-rater reliability. Intra-class correlation coefficient (ICC) (2,1) was applied to assess the inter-rater reliability and ICC (3,1) was applied to determine the intra-rater reliability of the two methods. In the PBS method, the intra-rater reliability was excellent (ICC=.91) and the inter-rater reliability was good (ICC=.84). The inter-rater and intra-rater reliability of the PBS method was higher than in the MS method. The PBS method could regulate manual scapular stabilization pressure in inter- and intra-rater measuring GIR ROM. Results of the current study recommend that the PBS method can provide reliable measurement data on GIR ROM.

• Bulletin of the Korean Chemical Society
• /
• 제33권9호
• /
• pp.2955-2960
• /
• 2012

Product ion yields in the in- and post-source decays of three peptide ions, $[Y_5X+H]^+$ (X = Y (tyrosine), K (lysine), and R (arginine)), generated by matrix-assisted laser desorption ionization (MALDI) were measured at six wavelengths, 307, 317, 327, 337, 347, and 357 nm, using ${\alpha}$-cyano-4-hydroxycinnamic acid (CHCA) and 2,5-dihydroxybenzoic acid (DHB) as the matrices. The temperatures of the early and late plumes generated by MALDI were estimated via kinetic analysis of the product ion yield data. For both matrices, the temperature drop (${\Delta}T$), i.e. the difference in the temperature between the early and late plumes, displayed negative correlation with the absorption coefficient. This was in agreement with the previous reasoning that deeper laser penetration and larger amount of material ablation arising from smaller absorption coefficient would result in larger extent of expansion cooling. The results support the postulation of the expansion cooling occurring in the plume presented previously.

• 한국항공우주학회지
• /
• 제37권7호
• /
• pp.653-660
• /
• 2009

회전익기의 로터 브레이크 시스템은 제동 시 운동에너지를 마찰에 의한 열에너지로 변환시켜 로터를 정지시키거나 감속시키게 된다. 이때 발생된 마찰열은 재료의 마찰 특성 자체에 상당한 영향을 주게 되어 제동시간의 변화를 초래하거나 열탄성적 불안정성을 발생시키기도 한다. 이에 본 논문에서는 상용해석 소프트웨어 ABAQUS를 이용하여 온도에 따른 마찰계수의 변화를 고려하여 제동시간을 예측할 수 있는 열기계학적 연성해석을 수행하였으며, 이와 함께 열기계학적 거동을 고려하여 간략한 이론식을 제시하고, 이를 통해 마찰계수가 온도에 따라 변할 경우 로터 브레이크 시스템의 제동시간을 예측하고 제안된 이론식의 타당성을 고찰하였다.

• 한국자동차공학회논문집
• /
• 제12권1호
• /
• pp.106-113
• /
• 2004

Most of mechanical structures are composed of many substructures connected to one another by various types of mechanical joints. In automotive engineering, it is important to study these connected structures under various dynamic forces for the evaluations of fatigue life and stress concentration exactly. In this study, the dynamic response of vehicle structure to external forces is classified an inverse problem involving strains from the experiment and the analysis. The practical dynamic forces are determined by the combination of the analytical and experimental method with analyzed strain by quasi-static finite element analysis under unit force and with measured strain by a strain gage under driving load, respectively. In a stressed body, inter-molecular chemical bonds are failed beyond the certain magnitude. The failure of molecular structure in material is considered as a time process of which rate is determined by mechanical stress. That is, the failure of inter-molecular chemical bonds is the fatigue lift of material. This kinetic concept is expressed as lethargy coefficient. And S-N curve is obtained with the lethargy coefficient from quasi-static tensile test. Equivalent practical dynamic force is obtained from the identification of practical dynamic force for one loading point. Using the practical dynamic force and S-N curve, fatigue life of a window pillar is analyzed with FEM under the identified force by the procedure of above mentioned.

• The Korean Journal of Ceramics
• /
• 제2권4호
• /
• pp.226-230
• /
• 1996

A small amount of fine particle graphite was added to $\alpha$-SiC and $\beta$-SiC having certain particle distributions, and they were mixed clay and frit. After forming, they were sintered at 140$0^{\circ}C$ for 3 hours. Tribological properties of sintered $\alpha$-SiC-$\beta$-SiC-graphite-clay (frit) system showed that kinetic friction coefficient was 0.108, specific wear rate was 1.3${\times}10^-8\;mm^2$.$kgf^1$, and torque was 0.01kgf.cm at the wrench torque of 100 kgf.cm.

• Journal of Magnetics
• /
• 제4권4호
• /
• pp.111-114
• /
• 1999

Numerical calculation for temperature dependence of galvanomagnetic properties of thin bismuth films is pursued. The quasi-two dimensional system is treated in the perturbation formalism of previous study, where realistic screened potential due to impurity is assumed to be the only scattering channel. The potential is separated into pure two dimensional part and the remaining presumed perturbation part. Relaxation time and mobilities for both electron and hole are evaluated, then temperature dependence of the Hall coefficient and magnetoresistance is obtained. The broad minimum of magnetoresistnace is manifested, and the interpretation under the kinetic theory is made. Thickness dependence of the quantities are also shown, which are in good agreement with the expected quantum size effect.

• Bulletin of the Korean Chemical Society
• /
• 제14권1호
• /
• pp.95-100
• /
• 1993

A noise-induced transition is presented for a bistable system subjected to a multiplicative random force, which is singular at the unstable state. The stationary probability distribution is obtained from the Fokker-Planck equation and the effects of the singularity is analyzed. On the basis of noise-induced phase transition with Gaussian white noise, the relaxation time and the transition rate of the system are evaluated up to the first order correction of D. In the parameter region v < l, the transition rates decrease as the exponent v goes to 1 and as the coefficient of the linear term of the kinetic equation increases.

• 공업화학
• /
• 제10권3호
• /
• pp.349-353
• /
• 1999

페놀성 산업폐수중 2,4-dichlorophenol과 2,4-dinitrophenol를 함유한 폐수에 대해서 phenol이 활성슬러지공법에서 이 두 물질의 미생물 분해와 활성슬러지공정에 대한 Eckenfelder 수정모델의 미생물분해계수 (biodegradation kinetic coefficient)에 미치는 영향을 연구실험하였다. 미생물 성장에 필요한 에너지원과 필수영양물질 (base mix. BM)을 함유한 폐수를 분해하고 있는 활성슬러지 시스템에 2,4-dichlorophenol과 2,4-dinitrophenol를 함유한 폐수를 유입시켰을 때 이 활성슬러지 시스템은 서서히 죽어갔고 미생물들이 다 씻겨 나갔다. 반면에 페놀에 먼저 순화되어 있는 활성슬러지 시스템에 2,4-dichlorophenol과 2,4-dichlrophenol을 함유한 폐수를 phenol과 함께 유입하였을 때는 분해가 잘 되었고, 분해효율은 $BOD_5$ 기준으로 91.9%에 달했다. 그리고 phenol, 2,4-dichlorophenol 및 2,4-dinitrophenol의 처리효율은 각각 99.8%, 43.3% 및 62.5%였다. 같은 반응조에 연이어서 유입한 에너지원과 필수 영양물질의 추가공급은 처리효율을 상당히 증가시켜 처리수 중의 phenol, 2,4-dichlorophenol 및 2,4-dinitrophenol 농도를 현저히 감소시켰다. 이러한 효과는 페놀에 의해 순화되어 있는 미생물이 BM의 추가공급으로 활성도가 증가되어 분해효율이 증가되었다고 본다. 페놀에 대한 미생물의 순화과정 없이 실험하였을 때는 정상상태를 유지할 수 없었기 때문에 그 결과로부터는 Eckenfelder 수정모델의 미생물분해계수의 값을 구할 수가 없없다. 순화과정을 거친 경우의 미생물분해계수는 12.44/day이었고, 추가적인 $BM\;47mg/l(BOD_5)$의 첨가에 의해서는 46.91/day로 증가되었다. 이러한 값들은 공정설계시에 설계값으로 사용될 수 있고 다른 벤젠유도체의 미생물분해연구에 기초자료로도 활용 될 수 있을 것이다.

• 한국축산식품학회지
• /
• 제33권2호
• /
• pp.155-161
• /
• 2013

This study developed predictive models to evaluate the kinetic behaviors of Bacillus cereus and Staphylococcus aureus in milk during storage at various temperatures. B. cereus and S. aureus (3 Log CFU/mL) were inoculated into milk and stored at $10^{\circ}C$, $15^{\circ}C$, $20^{\circ}C$, and $30^{\circ}C$, as well as $5^{\circ}C$, $15^{\circ}C$, $25^{\circ}C$, and $35^{\circ}C$, respectively, while bacterial populations were enumerated. The growth data were fitted to the modified Gompertz model to estimate kinetic parameters, including the maximum specific growth rate (${\mu}_{max}$; Log CFU/[$mL{\cdot}h$]), lag phase duration (LPD; h), lower asymptote ($N_0$; Log CFU/mL), and upper asymptote ($N_{max}$; Log CFU/mL). To describe the kinetic behavior of B. cereus and S. aureus, the parameters were fitted to the square root model as a function of storage temperature. Finally, the developed models were validated with the observed data, and Bias (B) and Accuracy (A) factors were calculated. Cell counts of both bacteria increased with storage time. Primary modeling yielded the following parameters; ${\mu}_{max}$: 0.14-0.75 and 0.06-0.51 Log CFU/mL/h; LPD: 1.78-14.03 and 0.00-1.44 h, $N_0$: 3.10-3.37 and 2.09-3.07 Log CFU/mL, and $N_{max}$: 7.59-8.87 and 8.60-9.32 Log CFU/mL for B. cereus and S. aureus, respectively. Secondary modeling yielded a determination of coefficient ($R^2$) of 0.926.0.996. B factors were 1.20 and 0.94, and A factors were 1.16 and 1.08 for B. cereus and S. aureus, respectively. Thus, the mathematical models developed here should be useful in describing the kinetic behaviors of B. cereus and S. aureus in milk during storage.

• 한국자동차공학회논문집
• /
• 제6권2호
• /
• pp.178-190
• /
• 1998

We have developed a planar impact model with a capability of reverse calculation to reconstruct various types of automobile collisions. This topic is the main part of what is referred to as accident reconstruction. The model uses the principle of impulse and momentum, and introduces a restitution coefficient and an impulse ratio at the impact center. Based on the car-to-car collision test results, we present how to estimate the restitution coefficient and the impulse ratio from some impact conditions. To validate the model and improve its reliability in accident analysis, the collision analysis has been performer with the estimated parameters. The analysis and experimental results agree well in the kinetic energy loss and the post-impact velocity.