• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.1
• /
• pp.98-118
• /
• 2014

An auto weather-vaning system for a Dynamic Positioning (DP) vessel is proposed. When a DP vessel is operating, its position keeping is hindered by ocean environmental disturbances which include the ocean current, wave and wind. Generally, most ocean vessels have a longitudinal length that is larger than the transverse width. The largest load acts on the DP vessel by ocean disturbances, when the disturbances are incoming in the transverse direction. Weather-vaning is the concept of making the heading angle of the DP vessel head toward (or sway from) the disturbance direction. This enables the DP vessel to not only perform marine operations stably and safely, but also to maintain its position with minimum control forces (surge & sway components). To implement auto weather-vaning, a nonlinear controller and a disturbance observer are used. The disturbance observer transforms a real plant to the nominal model without disturbance to enhance the control performance. And the nonlinear controller deals with the kinematic nonlinearity. The auto weather-vaning system is completed by adding a weather-vaning algorithm to disturbance based controller. Numerical simulations of a semi-submersible type vessel were performed for the validation. The results show that the proposed method enables a DP vessel to maintain its position with minimum control force.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.4
• /
• pp.1-10
• /
• 1996

In this paper are presented kinematic and dynamic modeling and path-tracking of fourwhelled mobile robot with 2 d.o.f. having the limited drivetorques. Controllability of wheeled-mobile robot is revealed by using the kinematic model. Instantaneously coincident coordinate cystem, force/torques generated by inverse dynamics exceed the limitation, we make wheeled-mobile robot follow the reference path by modifying the planned reference trajectory with time-scaling. The controller is introduced to compensate for error owing to modeling uncertainty and measurement noise. And simulation results prove that method proposed by this paper is efficient.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.2
• /
• pp.102-111
• /
• 2000

Methodology of volumetric error identification and compensation is presented to improve the accuracy of NC machine tools by using a reference artifact and a touch trigger probe. Homogeneous transformation matrix and kinematic chain are used for modeling the geo-metric and thermal errors of a three-axis vertical machining center. The reference artifact is designed and fabricated to identify the model parameters by machine tool metrology. Parameters in the error model are able to be identified and updated by direct measurement of the reference artifact on the machine tool under the actual conditions which include the thermal interactions of error sources. A volumetric error compensation system based on IBM/PC is linked with a FANUC CNC controller to compensate for the identified volumetric error in machining workspace.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.452-455
• /
• 1995

Various physical limitations which intrinsically exist in the manipulator control system, for example kinematic limits and torque limit, cause some undesirable effects. Specifically, when one or more actuators are saturated the expected control performance can not be anticipated and in some cases it induces instability of the system. The effect of torque limit, especially for redundant manipulators, is studied in this article, and an analytic method to reconstruct the control input using the redundancy is proposed based on the kinematically decomposed modeling of redundant manipulators. It results to no degradation of the output motion closed-loop dynamics at the cost of the least degradation of the null motion closed-loop dynamics. Numerical simulations help to verify the advantages of the proposed scheme.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.4
• /
• pp.154-166
• /
• 1992

A kinematic nonlinear multivariable launcher is modeled of which the azimuth and elevation axes are drived simultaneously and position control systems are designed for this system by the PD and LQG/LTR control methods. Also, the suitable command input fonction is suggested for the desired command following performance and the two control systems with disturbances and load variation are evaluated for the entire operating range by computer simulation. It is found that the two linear controllers can be used for the kinematic nonlinear multivariable launcher in the entire operating range and LQG/LTR controller is more effective for disturbance rejection.

• 전기의세계
• /
• v.39 no.6
• /
• pp.14-19
• /
• 1990

1. CAD system과 PROPS를 접속하여 CADsystem에서 Design된 surface를 사용할 수 있으며 Robot Kinematics를 graphic library화하여 surface배치 수상 및 path generation 및 animation을 통하여 가공작업을 위한 로보트 운동을 simulation할 수 있게 되었다. 2. Denavit-hartenberg transformation form에 의해 여러 Robot Kinematic을 일반적인 형식으로 library화 하였다. 3. 금형 가공의 공정들을 Menu로 만들어서 Expert system을 도입, 손쉽게 Interactive한 작업을 할 수 있게 하였다. 4. 차후의 연구 목표는 로보트 Calibration S/W의 개발 및 실현 그리고 Expert System을 이용한 Robot Program Generator의 완성을 통한 전체 Off-line programming System을 정립하는데 있다. 이를 위해서 더 실제적인 Tool Path Generation과 Expert System을 이용한 가공 조건의 결정 및 User Interface를 위한 Window가 개발되어야 한다. 5. 1차년도에 개발된 Robotonomic Tool System의 유연성을 확장시킨다. 실험결과를 바탕으로 공정 자동화 시스템을 확장시킨다. 6. 연마공정자동화에 필수적인 공구 및 공구 Tip의 표준화 및 자동교환장치를 개발한다. 7. 금형연마 Cell의 구성요소들간의 Interface 및 System Controller에서의 집적화를 시킨다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.3
• /
• pp.503-509
• /
• 2014

In this paper, a PID controller with adaptive neural network compensator is proposed to control the formations of mobile robot. The control system is composed of a kinematic controller based on the leader-following robot and dynamic controller for considering the dynamics of the mobile robot. The dynamic controller is constituted by a PID controller and the adaptive neural network compensator for improving the performance and compensating the change in dynamic characteristics. Simulation results show the performance of the PID controller and the neural network compensator for the circular trajectory and linear trajectory. And it is verified that by improving the performance of a PID controller via the adaptive neural network compensator, the following robot's tracking performance is improved.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1785-1789
• /
• 1991

Recently, a number of papers on adaptive control scheme of manipulators are proposed. Slotine and Li[1] showed an adaptive control scheme for robot manipulator. The controller was described in closed form. And later Niemeyer and Slotine discussed about a computational implementation of the controller in recursive form[2]. Walker proposed another adaptive control scheme which can be implemented by a recursive-form controller[4]. Closed-form description is used for the analysis or design of adaptive control systems while recursive-form realization is used for implementation of the controller. The relation between the closed-form realization and the recursive-form one seems to be inadequately referred. Hence, it makes sense to consider the relation between the closed-form description and the recursive-form one. In this paper, first, we make a simple derivation of an closed-form dynamics description of a robot arm from its recursive-form description. And then we derive the closed-form realization of Walker's scheme applied to manipulators having no kinematic loop. We clarify the difference between the Walker's scheme and Slotine's and evaluate the convergence under the controllers.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.10
• /
• pp.1045-1053
• /
• 2009

Precision stages for 6-DOF positioning, actuated by PZT stacks, which are fed back by gap sensors and guided by flexure hinges, have enlarged their application territory in micro/nano manufacturing and measurement area. The precision stages inherently have such limitations as the nonlinearity between input and output in piezoelectric stacks, feedback signal noise in precision capacitive gap sensors and low material damping in precision kinematic linkages of mechanical flexures. To surmount these limitations, the precision stage is modeled with physics-based variables, which are identified by transient response correspondence, and a gain margin calculation algorithm using the Prandtl-Ishlinskii model and describing function is newly developed to assess system performance more precisely than linear controller design schemes. Based on such analyses, a precision positioning controller is designed. Excellent positioning accuracy with rapid settlement accomplished by the controller is shown in step responses of the closed-loop system.

• International Journal of Aeronautical and Space Sciences
• /
• v.9 no.1
• /
• pp.66-75
• /
• 2008

In this work, we explore the feasibility of roll-pitch-yaw integrated autopilots for high angle-of-attack missiles. An investigation of the aerodynamic characteristics of a surface-to-air missile is presented, which reveals the strong effects of cross coupling between the longitudinal and lateral dynamics. Robust control techniques based on $H_{\infty}$ synthesis are employed to design roll-pitch-yaw integrated autopilots. The performance of the proposed roll-pitch-yaw integrated controller is tested in high-fidelity nonlinear five-degree-of-freedom simulations accounting for kinematic cross-coupling effects between the lateral and longitudinal channels. Against nonlinearity and cross-coupling effects of the missile dynamics, the integrated controller demonstrates superior performance when compared with the controller designed in a decoupled manner.