• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.5-8
• /
• 1999

The main stream of researches on the mobile robot is planning motions of the mobile robot under nonholonomic constraints while only considering kinematic model of a mobile robot. These researches, however, assume that there is some kind of dynamic controller which can produce perfectly the same velocity that is necessary for the kinematic controller. Moreover, there are little results about the problem of integrating the nonholonomic kinematic controller and the dynamic controller for a mobile robot. Also the literature on the robustness of the controller in the presence of uncertainties or external disturbances in the dynamical model of a mobile robot is very few. Thus, in this paper, the robust adaptive controller which can achieve velocity tracking while considering not only kinematic model but also dynamic model of the mobile robot is proposed. The stability of the dynamic system will be shown through the Lyapunov method.

• 전자공학회논문지 IE
• /
• 제46권4호
• /
• pp.73-77
• /
• 2009

본 논문에서는 모바일 로봇의 경로 주총 제어에 관해 다룬다. 설계된 제어기는 운동학 제어기와 동역학 제어기로 구성된다. 운동학 제어기는 2개의 게인을 가짐에 따라 기존의 3개의 게인을 가지는 제어기에 비해 게인 설정에 필요한 시간을 줄일 수 있다. 동역학 제어기는 마찰력과 외란 보상을 고려하여 다양한 환경에서 경로 추종 성능을 개선시킬 수 있다. 모의실험 결과를 통해 제안된 제어기의 안정된 성능을 확인할 수 있다.

• 제어로봇시스템학회논문지
• /
• 제9권6호
• /
• pp.466-472
• /
• 2003

This paper describes a tracking control for the mobile robot based on fuzzy systems. Since the mobile robot has the nonholonomic constraints, these constraints should be considered to design a tracking controller for the mobile robot. One of the well-known tracking controllers for the mobile robot is the back-stepping controller. The conventional back-stepping controller includes the dynamics and kinematics of the mobile robot. The conventional back-stepping controller is affected by the derived velocity reference by a kinematic controller. To improve the performance of the conventional back-stepping controller, this paper uses the fuzzy systems known as the nonlinear controller. The new velocity reference for the back-stepping controller is derived through the fuzzy inference. Fuzzy rules are selected for gains of the kinematic controller. The produced velocity reference has properly considered the varying reference trajectories. Simulation results show that the proposed controller is more robust than the conventional back-stepping controller.

• 대한인간공학회지
• /
• 제18권3호
• /
• pp.141-152
• /
• 1999

In this paper, We performed the human body dynamic modelling for the realistic animation based on the dynamical behavior of human body, and designed controller for the effective control of complicate human dynamic model. The human body was simplified as a rigid body which consists of 18 actuated degrees of freedom for the real time computation. Complex human kinematic mechanism was regarded as a composition of 6 serial kinematic chains : left arm, right arm, support leg, free leg, body, and head. Based on the this kinematic analysis, dynamic model of human body was determined using Newton-Euler formulation recursively. The balance controller was designed in order to control the nonlinear dynamics model of human body. The effectiveness of designed controller was examined by the graphical simulation of human walking motion. The simulation results were compared with the model base control results. And it was demonstrated that, the balance controller showed better performance in mimicking the dynamic motion of human walking.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.399-399
• /
• 2000

In this paper, path generation using the sensor platform is proposed. The sensor platform is composed two electric motors which make panning and tilting motions. An algorithm fur a real path form and an obstacle length is realized using a scanning algorithm to rotating the sensors on the sensor platform. An ARV (Autonomous Robot Vehicle) is able to recognize the given path by adapting this algorithm. In order for the ARV to navigate the path flexibly, a kinematic model needed to be constructed. The kinematic model of the ARV was reformed around its body center through a relative velocity relationship to controllability, which derives from the nonholonomic characteristics. The optimal controller that is based on tile kinematic model is operated purposefully to track a reference vehicle's path. The path generation algorithm is composed of two parks. On e part is the generating path pattern, and the other is used to avoid an obstacle. The optimal controller is used for tracking the reference path which is generated by recognizing the path pattern. Results of simulation show that this algorithm for an ARV is sufficient for path generation by small number of sensors and for low cost controller.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권10호
• /
• pp.1287-1296
• /
• 2014

This paper is about control of Automated Guided Vehicle for path following using fuzzy logic controller. The Automated Guided Vehicle is a tricycle wheeled mobile robot with three wheels, two fixed passive wheels and one steering driving wheel. First, kinematic and dynamic modeling for Automated Guided Vehicle is presented. Second, a controller that integrates two control loops, kinematic control loop and dynamic control loop, is designed for Automated Guided Vehicle to follow an unknown path. The kinematic control loop based on Fuzzy logic framework and the dynamic control loop based on two PID controllers are proposed. Simulation and experimental results are presented to show the effectiveness of the proposed controllers.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 춘계종합학술대회 A
• /
• pp.201-204
• /
• 2008

일반적으로 이동로봇은 제약조건을 갖는 비선형시스템으로 알려져 있다. 이러한 이동로봇의 궤적 제어를 수행하기 위해서 기존의 연구자들은 기구학적인 제어기와 동역학 제어기 2가지 제어기를 동시에 설계하고 있다. 본 논문에서는 수치실험결과 일반적으로 많이 알려져 있는 것과 같이 기구학적 제어기 없이 기존의 PID 제어기를 사용하여도 시스템이 발산되지 않는 다는 것을 알 수 있었다. 그러나 궤적에러는 비 선형시스템 Limit Cycle과 같은 형태의 일정한 위치에러가 발생되었다. 그래서 본 논문에서는 이와 같은 제적에러를 최소화 할 수 있도록 지능제어기법을 이용한 궤적제어기를 제안하고자 한다. 마지막으로 수치실험을 통한 성능을 평가하고자 한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.361-362
• /
• 2011

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.313-318
• /
• 2001

A haptic hand controller operated by the user's hand can receive information on position and orientation of the hand and display force and moment generated in the virtual environment to the hand. This paper presents a design method for KU-HHC, 6 DOF Korea University-haptic hand controller, which allows separation of workspace from linkage mechanism in consideration of the efficient user operation. First, the 3 DOF mechanism in which all the actuators are mounted on the fixed base is developed by combining a 5-bar linkage and gimbal mechanism. Then, the 6 DOF HHC is designed by connecting the two 3 DOF devices through a handle. This paper presents the forward and inverse kinematics for this device and Jacobian analysis. Improvement of the kinematic characteristics using performance index is also discussed. The hand controller KU-HHC based on this design concept and kinematic analysis was manufactured and shows excellent performance.

• 전자공학회논문지SC
• /
• 제40권5호
• /
• pp.308-316
• /
• 2003

이 논문은 퍼지 시스템을 기반으로 하여 이동로봇의 제적제어에 대하여 기술한다. 기존의 백스텝핑 (back-stepping) 제어기는 이동로봇의 동역학과 기구학을 모두 포함하여 제어기를 구성하였다. 그러나 기존의 back-stepping 제어기는 기구학적 제어기에서 생성되는 속도 명령에 의해서 많은 영향을 받는다. 기존의 back-stepping 제어기의 성능을 증가 시키기 위해서 본 논문에서는 비선형 제이기로 많이 사용되고 있는 퍼지 시스템을 사용하였다. 본 논문에서는 back-stepping 제어기의 새로운 속도명령을 퍼지 추론을 통하여 생성하였다. 퍼지 규칙은 기구학적 제어기의 개인을 설정하기 위해서 설정하였으며, 퍼지 추론을 통하여 새로 생성된 속도명령은 기준명령의 변화를 고려하여 생성되었다. 그리고 수치실험을 통하여 기존의 back-stepping 제어기 보다 제안된 방법이 우수함을 증명하였다.