• Journal of Korean Society of Forest Science
• /
• v.109 no.3
• /
• pp.313-324
• /
• 2020

This study investigated the environmental location effects that Larix kaempferi and mixed forests had on the early growth of wild-simulated ginseng (Panax ginseng C. A. Meyer) seedlings. Experimental plots were created in Larix kaempferi and mixed forests, and confirmed the location environments and growth characteristics of wild-simulated ginseng seedling. Our results showed that the soil properties, such as soil organic matter, total nitrogen, and cation exchangeable capacity were significantly higher in the mixed forest soil compared to the Larix kaempferi forest soil. Likewise, the growth characteristics of wild-simulated ginseng seedlings were significantly higher in mixed forestsd compare to the Larix kaempferi forest. Correlation analysis between tree species ratio, soil properties, and growth characteristics in the experimental plots determined that the soil properties and growth characteristics had significant positive correlation with the broad-leaved forest percentage. Growth characteristics of the wild-simulated ginseng seedlings were shown to have a significant positive correlation with organic matter, total nitrogen, and cation exchange capacities. This study has clearly demonstrated that the tree species ratio, and soil properties in Larix kaempferi and mixed forests were significantly correlated with the early growth of wild simulated ginseng seedlings. These results could help to improve the selection of suitable cultivation sites for wild-simulated ginseng.

• Journal of Korean Academy of Rural Health Nursing
• /
• v.7 no.1
• /
• pp.5-17
• /
• 2012

Purpose: The objectives of this study were to investigate the prevalence of the metabolic syndrome (MetS) and to identify associated factors with MetS among rural residents. Methods: Data were collected from 1,196 subjects over aged 30 years by a self-administered questionnaire, physical measurement, and blood test in a rural area. The prevalence of MetS was determined by the criteria of the American Heart Association/National Heart, Lung, and Blood Institute (AHA/NHLBI) and 2005 the Korean society for the study of obesity. Results: The prevalence of MetS was 40.5% for men, 49.2% for women. The prevalence of risk factors of MetS was 57.4% for elevated blood pressure, 49.0% for low HDL-cholesterol, and 48.6% for abdominal obesity. Unemployment and higher Body mass index (BMI) were associated factors for MetS regardless of gender. And higher age and physical inactivity in women only increased the odds of the MetS. Especially, BMI was a strong risk factor of MetS in both men and women. Conclusion: The prevalence of metabolic syndrome was higher in a rural area. Therefore, health care providers should develop lifestyle modification program to increase physical activity level and to prevent the obesity among rural residents in order to decrease the prevalence of MetS.

• Journal of the Korean Magnetics Society
• /
• v.16 no.6
• /
• pp.300-304
• /
• 2006

The varied heating temperatures were used for magnetic core materials, which nano sized ${\alpha}-Fe$ crystalline was created in nanocrystalline Fe-Si-B-Nb-Cu materials, with hish permeability and low power loss. The highest permeability and lowest power loss were obtained to the specimen heat-treated at $510^{\circ}C$. The signal transmission characteristics of inductive coupler, which was manufactured by using the magnetic core materials prepared in this study, at low frequency range, was influenced strongly by magnetic property of magnetic core materials as this result is corresponding to the permeability as a function of heat treatment temperature, as well, it was improved by impedance matching at high frequency range. Over $500{\mu}m$ of air gap in coupler is required to maintain the magnetic properties without magnetic saturation on the subterranean line transferred hish current of 300 A. The inductive coupler for PLC, which has an attenuation characteristics of less than 5dB, was manufactured using nano-crystalline magnetic core materials through the above mentioned research results.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.235-240
• /
• 2004

In order to develop new anti-photoaging agents from marine natural products, Zostera marina L. was selected for its antioxidative activity and inhibition of matrix metalloproteinase-1 (MMP-1) expression. Three compounds (compounds 1, 2, and 3) were isolated from the extract, and they were identified as apigenin-7-O-${\beta}$-D-glucoside (1), chrysoeriol (2), and luteolin (3). These compounds have SC$\_$50/ values of 0.18 mM, 0.68 mM, and 0.01 mM against l,l-dipheny1-2-picrylhydrazyl radical and 0.04mM, 0.03mM, and 0.01mM against the superoxide radical in the xanthine/xanthine oxidase system, respectively. Compound 3 suppressed the expression of MMP-1 by up to 44% at 35.0${\mu}$M and inhibited the production of interleukin 6, which is known as a cytokine that induces MMP-1 expression. In addition, the wrinkle improvement effect of the formulation with Z. marina extract was measured. As a result, remarkable reduction was found in the fine wrinkle and skin roughness after application of the cream with 3.0% this extract for 8 weeks. In conclusion, the isolated compounds from Z. marina extract were good antioxidant and suppressor of MMP-1 expression and the formulation with the extract diminished the skin wrinkle. Therefore, the extract can be used as a new anti-aging agent for application in cosmetic.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.124-130
• /
• 2012

The uniform nanofibers of poly(L-lactide-$co$-${\varepsilon}$-caprolactone) (PLCL) with different contents of marine collagen (MC) were successfully prepared by electrospinning method. The effects of the major parameters in electrospinning process such as tip to target distance (TTD), voltage, nozzle size and flow rate on the average diameter of the electrospun nanofiber were investigated in generating composite nanofiber. The diameter and morphology of the nanofibers were confirmed by a scanning electron microscopy (SEM). Also, we measured a water contact angle to determine the surface wettability of the nanofibers. The average diameter of the nanofibers decreased as the value of TTD, MC contents, and voltages increased in comparison with that of pristine PLCL nanofiber. In contrast, the diameter of the nanofibers increased as the flow rate and inner diameter of nozzle increased in comparison with that of pristine PLCL. In addition, the hydrophilicity of the nanofiber and attachment of MG-63 cells on the sheets increased as incorporated collagen contents increased. Therefore, the marine collagen would be a potential material to enhance cellular interactivity of synthetic materials by mimicking the natural tissue.

• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.107-113
• /
• 1999

The purpose of this study was to develop a miniature imaging gamma probe with high performance that can detect small or residual tumors after surgery. Gamma probe detector system consists of NaI(Tl) scintillator, position sensitive photomultiplier tube (PSPMT), and collimator. PSPMT was optically coupled with 6.5 mm thick, 7.62 cm diameter of NaI(Tl) crystal and supplied with -1000V for high voltage. Parallel hexagonal hole collimator was manufactured for characteristics of 40-mm hole length, 1.3-mm hole diameter, and 0.22 mm septal thickness. Electronics consist of position and trigger signal readout systems. Position signals were obtained with summing, subtracting, and dividing circuit using preamplifer and amplifier. Trigger signals were obtained using summing amplifier, constant fraction discriminator, and gate and delay generator module with preamplifer. Data acquisition and processing were performed by Gamma-PF interface board inserted into pentium PC and PIP software. For imaging studies, flood and slit mask images were acquired using a point source. Two hole phantom images were also acquired with collimator. Intrinsic and system spatial resolutions were measured as 3.97 mm and 5.97 mm, respectively. In conclusion, Miniature gamma probe images based on the PSPMT showed good image quality, we conclude that the miniature imaging gamma probe was successfully developed and good image data were obtained. However, further studies will be required to optimize imaging characteristics.

• Korean Journal of Environmental Biology
• /
• v.31 no.4
• /
• pp.362-369
• /
• 2013

Phytoplankton and zooplankton communities were investigated from 8 weir sites of the Nakdong River system to provide basic information on plankton community after weir construction and to estimate its effects on major water quality parameters. The relationship between plankton community structure and environmental factors was analysed with CCA (Canonical Correspondence Analysis). The results suggested that discharge and total phosphorus and nitrogen concentrations are important factors determining the phytoplankton species composition. For zooplankton community, the difference in discharge between September and October induced different distribution pattern of zooplankton community with more homogeneous distribution with extreme dominance of rotifers during the high discharge season. Chlorophyll a concentration representing phytoplankton biomass has been suggested as the main environmental factor affecting zooplankton community followed by COD and total nitrogen concentration.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.210.2-210.2
• /
• 2013

현재 국내의 상용화된 디지털 방식 X-선 영상장치에서 간접변환방식은 대부분 CsI를 사용하고 있으며, X-선 흡수에 의해 전기적 신호를 발생시키는 직접변환방식은 Amorphous Selenium(a-Se)을 사용한다. a-Se은 진공 중에 녹는점이 낮아 증착시 substrate의 온도에 따라 민감한 변화를 보인다. 본 연구에서는 간접변환방식에 비해 높은 영상의 질을 획득할 수 있는 직접변환방식의 a-Se기반 X-선 검출기 제작 시 substrate에 인가된 온도에 따른 특성을 연구하여 최적화 된 substrate의 온도를 알고자 한다. 본 실험에서는 glass에 투명한 전극물질인 Indium Tin Oxide (ITO)가 electrode로 형성된 substrate를 사용하였으며 그 상단에 a-Se을 Physical Vapor Deposition (PVD)방식을 거쳐 X-선 검출기 샘플을 제작하였다. PVD 공정 시 네 개의 보트에 a-Se 시료를 각각 100g씩 총 400g을 넣고, $5{\times}10-5Torr$까지 진공도를 낮추었다. 보트의 온도는 $270^{\circ}C$에서 40분 $290^{\circ}C$에서 90분으로 온도를 인가하여 a-Se을 기화시켜 증착하였다. 증착 시 substrate 온도를 각각 $20^{\circ}C$, $40^{\circ}C$, $60^{\circ}C$, $70^{\circ}C$ 네 종류로 나누어 실험을 진행하였다. 끝으로 증착된 a-Se 상단에 Au를 PVD방식으로 electrode를 형성시켜 a-Se기반의 X-선 검출기 샘플 제작을 완료하였다. 제작된 a-Se기반의 X-선 검출기 샘플의 두께는 80에서 $85{\mu}m$로 온도에 따른 차이가 없었다. 이후에 전기적 특성을 평가하기위해 electrometer와 oscilloscope를 이용하여 Dark current와 Sensitivity를 측정하여 Signal to Noise Ratio(SNR)로 도출하였으며 Scanning Electron Microscope(SEM) 표면 uniformity를 관찰하였다. 또한 제작된 a-Se기반 X-선 검출기 샘플의 hole collection 성능을 확인하고자 mobility를 측정하였다. 측정결과 a-Se의 work function을 고려한 $10V/{\mu}m$기준에서 70kV, 100mA, 0.03sec의 조건의 X-선을 조사 하였을 때 Sensitivity는 세 종류의 검출기 샘플이 15nC/mR-cm2에서 18nC/mR-cm2으로 비슷한 양상을 나타내었지만, substrate온도가 $70^{\circ}C$때의 샘플은 10nC/mR-cm2이하로 저감됨을 알 수 있었다. 그리고 substrate온도 $60^{\circ}C$에서 제작된 검출기 샘플의 전기적 특성이 SNR로 환산 시, 15.812로 가장 우수한 전기적 특성을 나타내어 최적화 된 온도임을 알 수 있었다. SEM촬영 시 온도상승에 따라 표면 uniformity가 우수하였으며, Mobility lifetime에서는 $60^{\circ}C$에서 제작된 검출기 샘플이 deep trap 수치가 높아 hole이 $0.04584cm2/V{\cdot}sec$로 $0.00174cm2/V{\cdot}sec$의 electron보다 26.34배가량 빠른 것을 확인하였다. 본 연구를 통해 a-Se증착 시, substrate에 인가된 온도는 균일한 박막의 형성 및 표면구조에 영향을 미치며 온도가 증가할수록 안정적인 전기적 특성을 나타내지만 $70^{\circ}C$이상일 시, a-Se층의 결정화가 생겨 deep trap을 발생시켜 전기적 특성이 저하됨을 확인 할 수 있었다. 따라서 증착 시의 substrate의 온도 최적화는 a-Se기반 X-선 검출기의 안전성 및 성능향상을 위해 불가피한 요소가 된다고 사료된다.

• Korean Journal of Ecology and Environment
• /
• v.48 no.2
• /
• pp.77-85
• /
• 2015

Siniperca scherzeri is major target species for restocking and restoration project as it is one of the economic species in South Korea. In this study, to investigate their ecological characteristics movement pattern and habitat characteristic of S. scherzeri were analyzed using radio telemetry. Three specimens released during spawning season, moved more than 10 km toward upstream from the release site. Whereas the remains released after spawning season, settled within 400 m of their release site except two specimens (Ss 11, 3.2 km; Ss, 15, 1.4 km). One of possible reason of upstream movement during spawning season is reproduction. The conditions of their settlement area is similar with reference conditions of their spawning ground. S. scherzeri were mainly detected near the edge of the water, and it may related with the facts that rocks are mainly located at the edge of the water and S. scherzeri prefers rocks for their shelter. AMD (Accumulated movement distance) positively related with body weight and condition factor K, but no significant relationship was identified with gender and total length. Daily movement boundary of S. scherzeri was $214.94m^2{\sim}3,257.19m^2$, and their movement was restricted near the edge of the water. The results of this study could be useful to restocking and restoration.

• Food Science of Animal Resources
• /
• v.32 no.4
• /
• pp.396-403
• /
• 2012

This study was conducted in order to investigate the effect of storage temperature abuse on the freshness of refrigerated and frozen spent hen's meat. After a room temperature storage condition, two different storage temperature were followed: refrigeration and frozen storage. All parts of the spent hen's meats were thawed at 4 d intervals up to 3 times (2, 6, and 10 d) for 24 h. The level of bacteria on the different parts of the refrigerated and frozen meats was higher than 6 Log CFU/g under the following storage conditions: refrigerated - breast, 12 h; leg, 6 h; wing, 12 h at the $1^{st}$ analysis, frozen - breast, 12 h at the $2^{nd}$ analysis; leg, 24 h at the $1^{st}$ analysis; wing, 12 h at the $1^{st}$ analysis. The pH value for the leg meat was higher than breast and wing meats. In the color measurements, under the room temperature storage condition, lightness and redness values decreased but the yellowness increased in refrigerated meats (p<0.05). The K-value regarding refrigerated leg meats exceeded 60%, which is the threshold value to evaluate the degree of freshness, during the $1^{st}$ analysis (p<0.05). The VBN value of refrigerated leg meat was the highest and reached up to 96.93 mg%. Thus, studies regarding the possible decline in quality according to the change of storage temperature could be used in order to establish a basic database for the quality control of spent hen meat being traded with other countries.