• International Journal of Air-Conditioning and Refrigeration
• /
• v.12 no.1
• /
• pp.1-9
• /
• 2004

The purpose of the present study is to examine the heat transport limitations in a screen mesh heat pipe for electronic cooling by theoretical analysis. Diameter of pipe was 6mm, and mesh numbers were 50, 100, 150, 200 and 250, and water was investigated as working fluid. According to the change of mesh number, wick layer, inclination and saturation temperature, the maximum heat transport limitations by capillary, entraintment, sonic and boiling were analyzed by a theoretical design method of heat pipe, including capillary pressure, pumping pressure, liquid friction coefficient in wick, vapor friction coefficient, etc. Based on the results, the capillary limitation in a small diameter of heat pipe is largely affected by mesh number and wick layer. Mesh number of 250 is desirable not to be used in pipe diameter of 6 mm, because capillary heat transport limitation decreases by the abrupt increase of liquid friction pressure due to the small liquid flow area. For the heat transport of 15 watt in 6mm diameter pipe, mesh number of 100 and one layer is an optimum wick condition, which thermal resistance is the smallest.

• Journal of Mechanical Science and Technology
• /
• v.20 no.1
• /
• pp.59-65
• /
• 2006

A half-scaled large test model for the main components of the real annular structure was built and the thermal behaviors were experimented and obtained by thermal cyclic loads. The model design and the test conditions for the thermal loads were determined to take into consideration the thermal and mechanical loads acting on the real annular structure by finite element analyses. Temperature profiles and strains of the main components of the model were measured at an early stage of the test and periodically throughout the test in the given test conditions. After completion of the thermal cyclic tests, no evidence of crack initiation and propagation were identified by a dye penetration test. The measured strains at the critical parts were slightly increased proportionally with the increase in the number of the thermal cycles.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1316-1318
• /
• 2002

A methodology for reliability and economic analysis of wind embedded electric power system is presented in this paper. This is done by evaluating the reliability index, loss of load expectation (LOLE), for the power system with and without integration of wind system in the overall electric power system. Economic analysis of the wind energy embedded electric system is done in terms of conventional fuel saving assessment due to the use of wind power generation units.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.629-634
• /
• 2003

본 연구에서는 대표적인 산업부산물인 굴패각과 플라이애쉬를 활용한 흡착제를 개발하여 중금속 이온의 제거 기작을 평가하였다. 1차적으로 연구된 중금속 이온은 카드뮴, 납, 구리이며, 산업부산물을 활용하여 흡착특성을 평가하였고, 동시에 현장 적용성을 모사하기 위해 점성토와 화강풍화토에 대한 흡착실험도 함께 수행하여 각각의 흡착특성을 비교ㆍ평가하였다. 실험 결과를 등온흡착식으로 분석하여본 결과 굴패각의 경우 카드뮴, 납, 구리이온의 용액 내 제거율이 해성점토나 화강풍화토를 사용한 흡착제에 비해 우수하므로 흡착제로서의 사용 가능성을 확인할 수 있었다.

• Journal of Korea Multimedia Society
• /
• v.18 no.4
• /
• pp.483-491
• /
• 2015

Data hiding is one of protective methods that can authenticate the completeness of digital information and protect intelligent property rights and copyright through secret communications. In this paper, we propose a data hiding method using pixel-value modular operation that has a high capacity while maintaining a good visual quality. The proposed method can embed secret data on the every pixel of a cover image by modular operation. The experiment results demonstrate that the proposed method has a high capacity and good visual quality where the embedding capacity is 91,138 bytes, the PSNR is 47.94dB, and the Q index is 0.968.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2524-2528
• /
• 2003

High-precision position system is widely used in lots of fields such as semiconductor industry, biotechnology, display and other up-to-date industry field. One of the main issues is to have a long traveling range with precision. There are a few solutions. For instance, there are inchworm methods, lever principle. In this study, we use lever principle to amplify output displacement with a new mechanical amplification structure. We designed new type 3DOF stage with PZT actuator and capacitive sensor. Non-monolithic structure is suggested to obtain the convenience of assembly and modification. Driving parts are designed as modules that generate displacement amplification of each axis. Designed motion module consists of 3 flexure hinges and a PZT actuator with double L lever structure.

• Annual Conference of KIPS
• /
• 2006.05a
• /
• pp.585-588
• /
• 2006

오늘날 디지털 TV 기술이 컴퓨팅 기술과 융합되면서 디지털 TV가 단순히 디지털 TV 수신만이 아닌, 네트워킹 능력을 갖춘 가전기기로 등장하고 있다. 본 연구에서는 이러한 디지털 TV가 일반적으로 대화면인 특징을 활용하여 TV를 수신하면서 다수의 원격지 모니터링을 가능하게 하는 부가 기능을 개발하고자 한다. 본 연구에서는 리모콘 인터페이스를 통해 동적 DNS 기반의 웹 사이트에서 원격지 모니터링 대상을 선택하고, 이들에 대한 모니터링 정보를 디지털 TV의 PIP(Picture-In-Picture) 화면으로 전송함으로써 디지털 TV의 부가가치를 제고하는 기술을 연구하였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.11a
• /
• pp.155-157
• /
• 2019

본 논문에서는 기존의 DERS, VSRS를 이용한 가상시점 합성이 가지고 있는 문제점을 해결하기 위해 비지도 학습 방식의 학습 모델을 이용하여 가상시점 합성에 적용하는 방식을 제안한다. 제안한 방식에서는 기존의 DERS와 달리 Disparity의 탐색범위를 지정하지 않고 Depth의 예측이 가능하며 단안의 영상에서 Depth를 예측하기 때문에 가상시점 합성 시 더 넓은 시점을 합성 할 수 있다. 또한 기존 방식은 Depth와 합성 영상을 각각 처리해야하지만 제안하는 방식은 한 번에 작업이 이루어지며, GPU를 기반으로 구현하였기 때문에 기존의 합성 방식 보다 처리 속도가 우수하다.

• Environmental Mutagens and Carcinogens
• /
• v.21 no.2
• /
• pp.106-112
• /
• 2001

In view of the effect of factor Ⅶ as a risk factor for essential hypertension, we investigated the length (I/D) polymorphism at position 323 promoter region and exon 8-Msp I RFLP of the human factor Ⅶ gene in the Korean patients with essential hypertension and normal controls. There were no significant differences in the allele, genotype and haplotype frequencies of these polymorphisms between normotensive and essential hypertensive subjects. The significant linkage disequilibrium was however, detected between two polymorphic sites. The Msp I RFLP and I/D polymorphism were also significantly associated with plasma triglyceride (TG) levels. Therefore, our results suggest that the significant association between two genetic variations in the human factor Ⅶ gene and plasma TG level may reflect the potential role of human factor Ⅶ gene as one of the genetic components for cardiovascular risk.

• Journal of Mechanical Science and Technology
• /
• v.18 no.11
• /
• pp.2042-2048
• /
• 2004

A molecular dynamics study has been conducted on an external-force-field-induced isothermal crystallization process of amorphous structures as a new low-temperature athermal crystallization process. An external cyclic-force field with a dc bias is imposed on molecules selected randomly in an amorphous-phase of argon. Multiple peaks smoothed out in the radial distribution functions for amorphous states appear very clearly during the crystallization process that cannot be achieved otherwise. When the amorphous material is locally exposed to an external force field, crystallization starts and propagates from the interfacial region and crystallization growth rates can be estimated.