• Proceedings of the Korea Society of Design Studies Conference
• /
• 1998.10a
• /
• pp.44-45
• /
• 1998

• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.957-963
• /
• 2014

Converter transformers play important roles in high-voltage direct current transmission systems. This paper presents experimental and analysis results of the combined electrical and thermal aging of oil-impregnated paper at pulsating DC voltages. Breakdown voltages and time-to-breakdown of oil-paper specimens were measured by using short-time and constant-stress tests. The breakdown characteristics of combined electrical and thermal aging on insulation system were discussed. According to the relationship between failure time and aging temperature, the two-parameter Weibull model was improved. On the basis of the competing risk algorithm and the improved Weibull model, the two factors failure model was calculated. And the influence of temperature in the insulation system has been analyzed. This model performs better than the two-parameter Weibull model when both time and temperature are considered as variables in estimating the lifetime of oil-paper insulation.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.2
• /
• pp.185-193
• /
• 2011

The successful and sustainable growth of SMEs depends on their ability of strengthen their competitiveness in quality and cost and service more than anything else as a fundamental of operation. Among these key competitive factors of SMEs, quality is the most critical factor in manufacturing business fields. There are many different ways to improve the quality performance but it needs proper management decision to choose the best way what can maximize outputs with minimum inputs. And it needs effective measurement methods and some indicators to analysis the quality performance properly. The quality cost is one of the simplest key indicators to measure the quality performance and the effectiveness of quality related management decisions. In this study, through survey on local SMEs, we found that their average annual quality cost ratio versus turnover - total amount of annual quality cost divided by annual turnover - is around 3.69% excluded some SME's performances what have different quality control measures with others. And we found some results what corresponded with the early studies on the correlations between those categorized quality costs factors and some discrepancies between some of the literature model and the early case study results as follows. There were negative correlations between the Prevention costs and the External failure costs, and the Appraisal costs and the External failure costs, and there was positive correlation between the Appraisal costs and Internal failure costs same as early studies. But, we couldn't found any strong negative correlations between the Cost of control - Prevention costs & Appraisal costs - and the Cost of Failure of control - Internal & External failure costs -.

• Journal of Korean Society of Transportation
• /
• v.24 no.3 s.89
• /
• pp.189-195
• /
• 2006

For the past decades, vehicle emissions has been a major source of air pollution in urban areas Vehicle inspection and maintenance (I/M) test programs were developed for major metropolitan areas to reduce urban air pollution. However. there are a few studies of exploring major factors to influence I/M test failure. This study develops a logit model to identify key factors affecting overall test failure, using the vehicle I/M test data from California in October 2002. The model results indicate that vehicle age, odometer reading, engine size, vehicle make, presences of emissions control equipment, and test types have significant effects on the probability of I/M test failure.

• Geomechanics and Engineering
• /
• v.32 no.4
• /
• pp.375-385
• /
• 2023

There are many joint fissures distributed in the engineering rock mass. In the process of geological history, the underground rock mass undergoes strong geological processes, and undergoes complex geological processes such as fracture breeding, expansion, recementation, and re-expansion. In this paper, the damage-stick-slip process (DSSP), an analysis model used for rock mass failure slip, was established to examine the master control and time-dependent mechanical properties of the new and primary fractures of a multi-fractured rock mass under the action of stress loading. The experimental system for the recemented multi-fractured rock mass was developed to validate the above theory. First, a rock mass failure test was conducted. Then, the failure stress state was kept constant, and the fractured rock mass was grouted and cemented. A secondary loading was applied until the grouted mass reached the intended strength to investigate the bearing capacity of the recemented multi-fractured rock mass, and an acoustic emission (AE) system was used to monitor AE events and the update of damage energy. The results show that the initial fracture angle and direction had a significant effect on the re-failure process of the cement rock mass; Compared with the monitoring results of the acoustic emission (AE) measurements, the master control surface, key blocks and other control factors in the multi-fractured rock mass were obtained; The triangular shaped block in rock mass plays an important role in the stress and displacement change of multi-fracture rock mass and the long fissure and the fractures with close fracture tip are easier to activate, and the position where the longer fractures intersect with the smaller fractures is easier to generate new fractures. The results are of great significance to a multi-block structure, which affects the safety of underground coal mining.

• Journal of Korean Society for Quality Management
• /
• v.47 no.3
• /
• pp.641-659
• /
• 2019

Purpose: Recently, the managing customer complaints properly has emerged as key source of competitive advantage in the large distribution industry. Effective customer complaint management helps firms minimize service failures and incense the capability to respond to customer's needs. Despite this importance, the in-depth prior study of a firm's service failures is very limited. Therefore, the actual service failure cases of large discount stores in Korea were analyzed in this study, and the types of service failures that occur at the service interface were identified. Method: Specifically, a total of 48,307 cases of customer complaints that have occurred in the past three years were collected from 1 January 2016 to 31 December 2018. Using 7 dimensions of service marketing mix. we have classified and analyzed systematically the service failure cases collected. Results: Among the cases of service failures, 34,921 (72.3%) cases were involved with the product factor, followed by 6,152 (12.7%) cases with person factor and 5,392 (11.2%) cases with process factor. Conclusion: By linking the main causes of service failure with the service marketing mix variables, this research presented a more systematic analytic model and verified by applying it to large domestic distribution company. Understanding the main factors affecting customer complaints n the large distribution industry can provide managers useful information and insight who want to achieve an effective customer complaint management.

• Journal of Trauma and Injury
• /
• v.29 no.4
• /
• pp.191-194
• /
• 2016

Pseudo-renal failure presents with renal failure characteristics, such as hypercreatininemia and hyperkalemia without a change in glomerular filtration rate or structure of the kidney. Pseudo-renal failure due to trauma is difficult to diagnose, because symptoms are non-specific and other factors may cause hypercreatininemia and hyperkalemia. In a trauma patient, especially one with pelvic injury, the abrupt elevation of potassium, blood urea nitrogen, and creatinine levels without previous medical history is a key feature in the diagnosis of urinary ascites. We report a case of pseudo-renal failure caused by intraperitoneal bladder rupture in a multiple trauma patient.

• Nuclear Engineering and Technology
• /
• v.53 no.1
• /
• pp.121-130
• /
• 2021

Cascading failure is the main cause of large blackouts in electrical power systems; this paper analyzes a cascading failure in Hanbit nuclear power plant unit two (2) caused by a circuit breaker (CB) operation failure. This malfunction has been expanded to the loss of offsite power (LOOP). In this study, current practices are reviewed and then the methodologies of how to prevent cascading failures in protection power systems are introduced. An overview on the implementation of IEC61850 GOOSE messaging-based zone selective interlocking (ZSI) scheme as key solution is proposed. In consideration of ZSI blocking time, all influencing factors such as circuit breaker opening time, relay I/O response time and messages travelling time in the communication network should be taken into account. The purpose of this paper is to elaborate on the effect of cascading failure in NPP electrical power protection system and propose preventive actions for this failures. Finally, the expected advantages and challenges are elaborated.

• Journal of Applied Reliability
• /
• v.9 no.1
• /
• pp.47-58
• /
• 2009

In this paper, an accelerated life test procedure for a vacuum cleaner motor is proposed. We investigate the failure mechanism of the motor and select some accelerating factors and determine the orifice size as a key accelerating factor. Three stress levels of orifice size are tested and the failure data with censored data are analyzed. The modified accelerating test will reduce the test time in design phase by using the accelerating factor.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.261-268
• /
• 2017

The development of ICT technology centered on mobile smart platforms have been emerging as a shared economic platform based on collaborative consumption. In this study, we analyze what factors affect success and failure in commercialized shared economic platforms from 2008 to 2016, and present what policy factors are needed to activate shared economic platform. To do this, we analyze successful cases of shared economic platforms and failed cases, derive key variables that affect success and failure, and conduct inductive analysis based on ID 3 algorithm based on them. Through this, we present the policy factors for the commercial success of the shared economic platform by deriving the rules for the success and failure of the shared economic platform.