• Current Optics and Photonics
• /
• v.4 no.4
• /
• pp.317-325
• /
• 2020

Accurate estimation of spatial frequencies and phases for illumination patterns are essential to reconstructing super-resolution images in structured illumination microscopy (SIM). In this manuscript, we propose the improved component cross-correlation (ICC) algorithm, which is based on optimization of the cross-correlation values of the overlapping information between various spectral components. Compared to other algorithms for spatial-frequency and phase determination, the results calculated by the ICC algorithm are more accurate when the modulation depths of the illumination patterns are low. Moreover, the ICC algorithm is able to calculate the spatial frequencies and phases simultaneously. Simulation results indicate that even if the modulation depth is lower than 0.1, the ICC algorithm still estimates the parameters precisely; the images reconstructed by the ICC algorithm are much clearer than those reconstructed by other algorithms. In experiments, our home-built SIM system was used to image bovine pulmonary artery endothelial (BPAE) cells. Drawing support from the ICC algorithm, super-resolution images were reconstructed without artifacts.

• Journal of the Korean Society of Tobacco Science
• /
• v.22 no.2
• /
• pp.170-175
• /
• 2000

This study was carried out to compare the quality of licorices from various cultivating areas. licorice samples used in this study were collected from North-east and Sinkiang area in China, Mongolia, Uzvekistan and Kazahstan. The chemical components of licorice samples were analyzed and the signal patterns of the electracts were detected by the electronic nose. Contents of glycyrrhizin and glicyrrhizic acid, the key components of licorice were distributed in the region of 16.7～25.2% and 5.8～10.2%, respectively and were various according to the samples of the collected areas. In glycyrrhizin contents, root of Sinkiang showed the lowest value of 16.7%, and that of North-east the highest of 25.2%. In glycyrrhizic acid contents, root of Sinkiang showed the lowest of 5.8 %, and Kazahstan showed the highest of 10.2 %. Composition ratio of glycyrrhizin to glycyrrhizic acid was not always limear. As other components is other components affecting quality, contents of ash, starch and gums were 2.4～3.7%, 0.2～3.9%, respectively. When the headspace volatiles of licorices were analyzed using Electronic Nose System and the obtained data were interpreted using statistical method of MANOVA, characteristic patterns of licorices were different from each other according to collected area and its p value showed 0.0001. These results suggest that licorices may be discriminated from the collected areas by using Electronic Nose System.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.589-594
• /
• 1991

Group Technology (GT) is a technique for identifying and bringing together related or similar components in a production process in order to take advantage of their similarities by making use of, for example, the inherent economies of flow production methods. The process of identification, from large variety and total of components, of the part families requiring similar manufacturing operations and forming the associated groups of machines is referred as 'machine-component grouping'. First part of this paper is devoted to describing a hierarchical divisive algorithm based on graph theory to find the natural part families. The objective is to form components into part families such that the degree of inter-relations is high among components within the same part family and low between components of different part families. Second part of this paper focuses on establishing cell design procedures. The aim is to create cells in which the most expensive and important machines-called key machine - have a reasonably high utilization and the machines should be allocated to minimize the intercell movement of machine loads. To fulfil the above objectives, 0-1 integer programming model is developed and the solution procedures are found. Next an attempt is made to test the feasibility of the proposed method. Several different problems appearing in the literature are chosen and the results air briefly showed.

• International Journal of High-Rise Buildings
• /
• v.2 no.2
• /
• pp.123-130
• /
• 2013

In the past two decades, researchers from different countries have conducted series of experimental and theoretical studies to investigate the behaviour of structures in fire. Many new insights, data and calculation methods have been reported, which form the basis for modern interdisciplinary structural fire engineering. Some of those methods are now adopted in quantitative performance-based codes and have been migrated into practice. Mainly based on the achievements in structural fire research at China, the Chinese national code for fire safety of steel structures in buildings has been drafted and approved, and will be released in this year. The code is developed to prevent steel structures subjected to fire from collapsing, ensure safe evacuation of building occupants, and reduce the cost for repairing the damages of the structure caused by fire. This paper presents the main contents of the code, which includes the fire duration requirements of structural components, fundamental requirements on fire safety design of steel components, temperature increasing of atmosphere and structural components in fire, loading effect and capacity of various components in fire, and procedure for fire-resistant check and design of steel components. The analytical approaches employed in the code and their validation works are also presented.

• Journal of Korean Academy of Psychiatric and Mental Health Nursing
• /
• v.27 no.4
• /
• pp.355-369
• /
• 2018

Purpose: This study was intended to integrate the evidence of intervention for child and adolescent perpetrators of school violence through an integrative literature review. Methods: Using combinations of the terms 'bullying', 'school violence', and 'intervention' as key words, the researchers searched eight electronic databases for relevant studies. Fifteen studies were selected through full-text screening of related research published in academic journals before June 2018. The framework was used to identify the selected studies' intervention patterns and classify the various intervention components. The extracted intervention components were grouped into potential themes to determine whether the researchers clearly showed the interventions in the studies. Results: The intervention components of 15 selected studies were categorized into five themes: 1) Utilizing intervention techniques for voluntary participation, 2) Enhancing self-awareness, 3) Strategies to improve emotional intelligence, 4) Promoting interpersonal skills, and 5) Emphasis on responsibility through future vision experience. Conclusion: As a result of analyzing interventions for children and adolescent perpetrators of school violence, five components were derived. It is suggested that these components should be considered in the field, and intervention programs development and research using them are needed.

• Smart Structures and Systems
• /
• v.24 no.6
• /
• pp.783-791
• /
• 2019

Prefabricated reinforced-concrete shear walls are used extensively in building structures because they are convenient to construct and environmentally sustainable. To make large walls easier to transport, they are divided into smaller segments and then assembled at the construction site using a variety of connection methods. The present paper proposes a precast shear wall assembled using steel shear keys, wherein the shear keys are fixed on the embedded steel plates of adjacent wall segments by combined plug and fillet welding. The anchoring strength of shear keys is known to affect the mechanical properties of the wall segments. Loading tests were therefore performed to observe the behavior of precast shear wall specimens with different anchoring components for shear keys. The specimen with insufficient strength of anchoring components was found to have reduced stiffness and lateral resistance. Conversely, an extremely high anchoring strength led to a short-column effect at the base of the wall segments and low deformation ability. Finally, for practical engineering purposes, a design approach involving the safety coefficient of anchoring components for steel shear keys is suggested.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.4
• /
• pp.119-131
• /
• 2014

This study discusses the results of an empirical study carried out to illustrate the key issues that need to be addressed to ensure accounting information quality (AIQ). The study also focuses on the factors of trust and risk as they impact the intention to use accounting information from accounting information systems(AIS). The factors that might impact on accounting information quality have been summarized from the existing literature on previous studies in this area. This study proposes a research model for key issues that have an impact on accounting information quality based on the literature. I use the empirical results of this study to discuss the key components of the research model.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.415-416
• /
• 2002

Experiments have been conducted to investigate scuffing mechanism in oil lubricated piston-ring /cylinder sliding contacts. Samples were extracted from actual components to simulate the real contact geometry and other influencing conditions. A standard test machine. with some modifications, has been used for the investigation of the effects of surface temperature load and sliding velocity. preliminary tests were carried out to find the critical temperature of scuffing using gradient temperature under a constant load, reciprocating frequency and stroke. The experimental and analytical results show that a transition from lubricated contact to adhesion, accompanied by the phenomena such as material transfer between the two sliding surfaces, local contact welding and temperature rise, and sharp increase in friction coefficient, appears to contribute to the final failure of scuffing.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.9
• /
• pp.2098-2100
• /
• 2009

A new tetrahydroanthracene, 3,6,9-trihydroxy-3,4-dihydroanthracen-1(2H)-one (1), six phenolics, moscatilin (2), gigantol (3), batatasin (4), moscatin (5), 9,10-dihydromoscatin (6), 10-dihydrophenanthrene-2,4,7-triol (7), and a sesquiterpenoid, corchoionoside C (8), together with two sterols $\beta$-sitosterol (9) and daucosterol (10), were isolated from the stems of Dendrobium polyanthum. Compounds 1 and 2 were assessed for cytotoxic activity against two human tumor cell lines (A549 and HL-60).

• Genomics & Informatics
• /
• v.14 no.1
• /
• pp.2-11
• /
• 2016

The advances in mass spectrometry-based proteomics technologies have enabled the generation of global proteome data from tissue or body fluid samples collected from a broad spectrum of human diseases. Comparative proteomic analysis of global proteome data identifies and prioritizes the proteins showing altered abundances, called differentially expressed proteins (DEPs), in disease samples, compared to control samples. Protein biomarker candidates that can serve as indicators of disease states are then selected as key molecules among these proteins. Recently, it has been addressed that cellular pathways can provide better indications of disease states than individual molecules and also network analysis of the DEPs enables effective identification of cellular pathways altered in disease conditions and key molecules representing the altered cellular pathways. Accordingly, a number of network-based approaches to identify disease-related pathways and representative molecules of such pathways have been developed. In this review, we summarize analytical platforms for network-based protein biomarker discovery and key components in the platforms.