• Journal of Veterinary Clinics
• /
• v.24 no.2
• /
• pp.119-124
• /
• 2007

Milk components analysis was carried out milk yield(MY), milk fat(MF), milk protein(MP), milk urea nitrogen(MUN), milk solid(MS), day of non-pregnant condition(DNPC), and days of primipara(DPRI) involved. Dairy farms were divided high, middle and low groups according to the standard records for milk components. Examination records were divided by farm, parity, year, season and month, the number of samples were 28,957. MUN concentration was below 12 mg and when the MPP was below 3.0%, the days of non-pregnant condition were $94{\pm}10.77$ days but concentration of MUN was under 12 mg and when MPP was above 3.2%, longer period of non-pregnant condtion of $181.3{\pm}9.25$ was noted. The days of gestation of the first calving cow was $495.9{\pm}9.04$ days when the concentration of MUN was below 12mg/dl and MPP was under 3.0%. If the concentration of MUN was 12 mg/dl and when the MPP was over 3.2%, the days of gestation were $511.0{\pm}8.36$ days. It was believed that the concentrations of MPP and MUN have significant effects on the days of non-pregnant condition and the days of gestation. Determination of MY, MF, MS, and MUN was Milkoscan $4,000{\sim}5,000$ Serier(FOSS Electric Co., Copenhagen, Denmark). MUN standard concentration was 12-18(mg/dl) similar to blood urea nitrogen(BUN). Mutual relationship of milk components(MF, SCC, MY, DNPC, MS) and MUN concentration was low in regression analysis.

• Archives of Pharmacal Research
• /
• v.19 no.4
• /
• pp.321-325
• /
• 1996

Aiming at the development of anticancer agents by modification of phenolic benzo[c]phenanthridine alkaloid, additional hydroxyl group was put on C10 position of fagaridine (1) by a biomimetic synthetic procedure to afford 10-hydroxyfagaridine (12). All of the synthetic intermediates were also screened in vitro antitumor activities against five different cell lines as well as 12. Among them the representative cytotoxic results are shown as follows; P-quinone (11) $[ED_50;(A549=0.22; {\mu}g/ml)$, $(HCT;15=0.21 {\mu}g/ml)$, fagaridine (1) $(HCT;15=0.41 {\mu}g/ml)$, olefin (6) $(HCT; 15=0.06 {\mu}g/ml)$, acetal (7) $(SKMEL-2=0.07 {\mu}g/ml)$, dihydrofagaridne (10) $(A549=0.38 {\mu}g/ml)$, 10-hydroxyfagaridine (12) $(A 549=0.45{\mu}g/mi)$. From these observation three main remarks can be drawn; (i) the iminium part of benzo[c]phenanthridine is not essential for showing acitvities, (ii) the additional hydroxyl group did not contribute to enhance the cytotoxicity, (iii) the 3-arylisoquinolin-1(2H)-one derivatives were found to display significant in vitro antitumor activity.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2006.11a
• /
• pp.69-72
• /
• 2006

To investigate the manufacturing methods of surimi-like materials (SLM) from breast muscle of spent hen, the muscles were diced, chopped and washed with distilled water or sodium chloride solution at 0.1, 0.5 and 1% level and then washed with distilled water to extract myofibrillar protein. When used only distilled water to extract myofibrillar protein, washing was repeated 3 times followed by homogenization and centrifugation of breast muscle after each washing (CM; conventional method). Whereas, to extract myofibrillar protein using sodium chloride solution had sufficient to do 2 times washing by distilled water after 1 time washing by sodium chloride followed by homogenization and centrifugation of breast muscle after each washing (NM; new method). The both batter and cooked SLM gel from NM had significantly (p<0.05) lower redness compared with CM. Again, SDS-PAGE with sarcoplasmic protein fractions showed that the bands of phosphorylase had increased staining intensity in NM compared with CM. These results indicated that the brightness was related to sarcoplasmic protein fractions. SDS-PAGE with myofibrillar protein showed that the bands of myosin had increased staining intensity in NM compared with CM. Data implied that myofibrillar protein extraction with sodium chloride solution had the better adaptability for the breast muscle of spent hen then the commonly used distilled water method.

• KIEAE Journal
• /
• v.16 no.3
• /
• pp.47-55
• /
• 2016

Purpose: This study was aimed at providing the basic checklist as a means to assess the crime risk in physical environment of the pedestrian passage at residential area. Method: For this purpose, the preliminary checklists were selected according to the review of the precedent studies of checklists in exterior pedestrian passage. The usefulness and the importance of the preliminary checklists were analyzed through the seven expert group meetings, the 87 questionnaires survey of the crime experts & the architectural/urban experts, preliminary assessment and field survey. Results: The assessment categories of checklists were sorted into six types, i.e. spatial structure & function, lighting, landscaping, security facilities, other facilities and cleaning & maintenance. The 49 checklists were proposed according to the assessment categories. The final checklists were divided key checklists and general checklists based on the results of experts' weighting of each list item. There were significant differences between crime experts' weighting and architectural/urban experts' weighting in several checklists, i.e. dividing between pavements and streets, the brightness of light, white light.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.20 no.2
• /
• pp.83-94
• /
• 2004

The purpose of this study was to compare the distributing pattern of stress according to the types of occlusal load on the finite element models of the splinted implant prostheses. The finite element model was designed with the parallel placement of two fixtures ($4.0mm{\times}11.5mm$) on mandibular first and second molars. The cemented crowns for mandibular first and second molars were made. Three-dimensional finite element model was created with the components of the implant, surrounding bone and cemented crowns. Two types of occlusal load, the point load and the surface load within 0.5 mm radius circle, were applied to the finite element models with 200N magnitude in axial(along the long axis of the implant and oblique(angulation of $30^{\circ}$ to the long axis) directions perpendicular to cuspal incline. Loads were positioned from the center of central fossa and to distance of 2 mm and 4 mm apart from the center of central fossa. Von-Mises stresses were recorded and compared in the fixtures and sections. The results were as following : 1. Under axial loading at the central fossa, the stress was distributed along the fixture except for the apical portion, not relative to both point & surface contacts. 2. With offset distance increasing, the highest stresses were concentrated in the neck portion of the fixture. 3. The maximum von Mises stress under the oblique load was greater than that under the axial load. 4. Under the oblique load, the highest stress were concentrated in the buccal side and lingual neck portion of the fixture with offset distance increasing. The results had a tendency to increase the stress on the neck portion of fixture with the offset and oblique loads increasing. The design of occlusal scheme should be allowed to distribute stress axially in maximum intercuspation and to decrease the angulation of cuspal incline.

• Food Science of Animal Resources
• /
• v.26 no.1
• /
• pp.43-48
• /
• 2006

To investigate the effect of boning time and storage temperature on meat quality of duck breast, a total of thirty duck breasts were designed in frozen-thawed, chilled-storage, and cold-boning samples. No significant differences were found among pH of all samples. However, cold-boning samples showed significantly (p<0.05) lower cooking loss than the other samples. Frozen-thawed samples showed significantly (p<0.05) higher lightness ($L^*$) and yellowness($b^*$), shorter sarcomere length and higher shear force values compared to the other samples. The result speculated that muscle shortening was affected by lower temperature (frozen) hence tenderness was decreased. Sarcoplasmic protein solubility showed no significant differences among samples, whereas cold-boning samples showed significantly (p<0.05) higher myofibrillar and total protein solubility than the other samples. The result of sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) patterns, chilled-storage and cold-boning samples showed degradation at high molecular protein (nebulin), which was not observed in frozen-thawed samples. Therefore, this data suggested that muscle shortening, tenderness and protein degradation are not affected by boning time rather affected by rapid change of temperature in frozen-thawed samples.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.291-295
• /
• 2007

강수진단모형을 이용하여 저수지 이수운영을 위한 실시간 유량예측기법을 개발하였다. 강수진단모형은 현재 기상청 현업에서 수행중인 강우수치예보를 기반으로 상세 지역의 지형 효과에 의한 강수를 예측하는 정량강수예측모형(QPM; Quantitative Precipitation Model)으로서 부경대학교 환경대기과학과에서 개발된 모형이다. QPM은 중규모 예측 모형으로부터 계산된 수평 바람, 고도, 기온, 강우 강도, 그리고 상대습도 등의 예측 자료를 이용하고, 소규모 상세지형 효과를 고려함으로써 중규모 예측 모형에서 생산된 강수량 예측 값을 상세 지역의 지형을 고려한 강수량 예측 값으로 재구성하여 결과적으로 3km 간격의 상세지역 강우산출과 지형에 따른 강수량의 분포 파악이 용이할 뿐만 아니라 계산 효율성을 개선된 모형이다. QPM 검증을 위하여 기상학적 평가와 수문학적 평가를 수행하였다. 호우 사례별 일강수량의 시공간 분포로 부터, QPM을 활용한 시스템에 의한 예측결과가 원시자료 RDAPS 보다 고해상도의 예측 및 지형효과의 반영도가 높았으며, AWS의 관측자료와 비교하여 보다 높은 예측성을 보여 주었다. 대상기간인 2006년 1월 1일부터 6월 20일까지 관측강우는 총 391.5mm 였으며 RQPM은 실적강우에 비하여 119.5mm 정도 과소산정하고 있으나 분위사상과정을 거치게 되면 351.7mm로서 실적강우에 불과 10.2% 못미치고 있다. 이는 고무적인 결과로 볼 수 있으며 현업에서의 활용성이 기대되는 수준이라 볼 수 있다. 강우-유출모의를 위한 QPM신뢰도를 높이기 위하여 분위사상법(Quantile Mapping)을 이용하여 QPM모의에 존재할 수 있는 계통오차에 대한 추가적인 보정을 수행하였다. 수문학적 평가를 위하여는 장기연속유출모형인 SSARR모형을 기반으로 개발된 RRFS(Rainfall-Runoff Forecast System)을 이용하여 2006년 1월${\sim}$9월까지의 용담댐 유입량에 대하여 모의예측결과와 관측유입량 비교를 통한 검증을 수행하였다. 위 기간중 예측유입량의 RMSE(Root Mean Squared Error), COE(Sutcliffe Coefficient of Efficiency), MAE(Mean Absolute Error), $R^2$값은 각각 7.50, 0.68, 2.59, 0.69 값을 보이고 있다. 본 연구에서는 QPM에 의한 예측성의 향상 및 구축된 시스템에 의한 일강수량의 장기예측 가능성을 확인하였고, 향후 시스템을 현업에 활용하기 위해서 생산된 예측자료의 보다 장기적인 검증을 통한 시스템의 안정화가 필요할 것으로 사료된다.

• Korean Journal of Veterinary Research
• /
• v.32 no.3
• /
• pp.429-434
• /
• 1992

This study was carried out to develop an effective liquid-phase double antibody enzyme immunoassay for determining of progesterone. The optimum conditions of assay system, 1st and 2nd antibodies, enzyme conjugate, and time reaction were invested. The bovine plasma progesterone level in dairy cattle and korean native bulls were also analyzed. The results obtained were as follows; 1. The reproducibility of petroleum ether was superior to that of ethyl ether as extract solvent of progesterone in plasma. 2. The optimum dilution rate of 1st and 2nd antibody was 30,000 and 10 times, respectively. Affer the reaction of enzyme conjugate to progesterone 1st antibody, and then 2nd antibody competition reaction was enough for over 1hr. 3. Average plasma progesterone level in 4 pregnant and 9 nonpregnant Holstein was $2.5{\pm}0.5$ and $0.7{\pm}0.2ng/m{\ell}$, respectively. Average plasma progesterone level of 10 Korean native bulls was $0.1{\pm}0.001ng/m{\ell}$ From these results, by using liquid phase double antibody enzyme immunoassay for progesterone is applicable to detect of early pregnancy diagnosis, factorial analysis of reproductive disorder, and also reproductive physiological function such as monitoring of cyclicity during the post-partum period.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.4
• /
• pp.77-85
• /
• 1994

In this study an adaptive algorithm with optimum convergence factor for steepest descent method is proposed, which controls automatically the filter order to take the appropriate level. So far, fixed order filters have been used when adaptive filter is employed according to the priori knowledge or experience in various adaptive signal processing applications. But, it is so difficult to know the filter order needed in real implementations that high order filters have to be performed. As a result, redundant calculations are increased in the case of high order filters. The proposed variable length optimum convergence factor (VLOCF) algorithm takes the appropriated filter order within the given one so that the redundant calculation is decreased to get the enhancement of convergence speed and smaller convergence error during the steady state. The proposed algorithm is evaluated to prove the validity by computer simulation for system Identification.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.7
• /
• pp.1127-1134
• /
• 2007

Gels were made from surimi-like pork (SLP) made from muscles obtained at 1, 24 and 72 h post-mortem. The SLP from pre-rigor muscle had higher pH and moisture percentage compared to in- or post-rigor muscles. Also, SLP from pre-rigor muscle showed higher concentration of water-soluble protein that was washed out during the process. Gel from post-rigor muscle exhibited higher a* and b* value, and also resulted in higher Chroma and lower hue values. The dark color of gel from post-rigor muscle was related to higher concentration of sarcoplasmic protein in SLP and denser structure in the gel matrix. SDS-PAGE showed higher intensity of the phosphorylase in the sarcoplasmic protein fraction from pre-rigor muscle. Gel from post-rigor muscle showed higher hardness and sensory firmness, and the greater firmness was related to higher concentration of protein in SLP, and a compact network with smaller pockets in the gel matrix.