• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.442-449
• /
• 2000

Before the complete construction of new high-speed line between Seoul and Pusan, KTX is going to operate on both new high-speed line between Seoul and Daegu and electrified conventional lines between Daegu and Pusan. Then, the wheels of KTX are going to operate on various rails such as KS50N and KS60 of conventional line as well as UIC60 of high-speed line. Also, conventional line will have a mixed traffic mode with various types of trains operating on it, such as Saemaul and Mugunghwa. Hence, this study reviews the wear phenomena of wheels and rails in geometrical point of view by comparing their profiles. The analyses of the results show that because UIC60 rail is designed for KTX, KS50N rail whose profile is similar to that of UIC60 will not have any impact on the shape of wheel wear. On the other hand, KS60 rail is expected to have partial wear on both the flange of KTX wheel and the gauge corner of the rail in the initial stages. However, the operation of the trains whose wheels have 1/20 conicity will cause partial sidewear on the inside of the rail and the movement of the contact point between KTX wheel and the rail toward the inside of the track. As a result, the flange wear of KTX wheel will be reduced and the formation of wear-equilibrium profile will be faster.

• Journal of the Korean Society for Railway
• /
• v.15 no.5
• /
• pp.498-507
• /
• 2012

This paper presents the ERRI design diagrams of KTX and HEMU applicable to simply supported single span bridges, and analyzes the dynamic characteristics and design considerations of the bridges under KTX and HEMU using the diagrams. The design diagrams of KTX and HEMU are calculated for the bridges with 25m, 30m, 35m and 40m span lengths, which are widely used for simple bridge in Korea. From the design diagrams, the dynamic characteristics of the bridges with the selected span lengths are analyzed. In addition, the design consideration is discussed to satisfy the design requirement of acceleration. It is desirable for the bridge with 25m span length to avoid resonance both for KTX and HEMU. Since larger responses are expected for HEMU in the bridge with 30m span length, and for KTX in the bridge with 35m and 40m span length, the bridges should be planned to have enough mass satifying acceleration requirement at resonance, or to avoid the resonance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.3
• /
• pp.228-232
• /
• 2005

This paper presents the efforts of the studies for improvement of spin characteristics of KTX-1 #02 through rotary balance test, forced oscillation test and spin mode analysis. During the full scale development design stage, we had fullfilled a lot of spin flight test, spin mode analysis. Based on all of the efforts, KTX-1 had been developed as a successful trainer with excellent spin characteristics.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.20-25
• /
• 2007

KTX is being operated on Kyung-Pu High Speed Railroad Line and Ho-Nam Railroad Line from April 2004. Reduction units is occurring water infiltration at heavy snow and oil leakage because of labyrinth structure. This paper describes design method and evaluation technology to improve structure to prevent water infiltration and oil leakage for reduction units of KTX. This reduction units need high power and high speed to run and they have to make optimal lubricant without change current interface.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1172-1178
• /
• 2009

The Training using a simulator comes into the spotlight as effective and safety training tool in a lot of fields. Driving simulator of KTX-II is for driver's actual training using virtual reality to be improved their ability of operation against when they are faced with urgent situation and various accidents. This paper describes the construction of the propulsion and brake model for KTX-II driving simulator and the utility of the model as a result in comparison with the design data of the real train.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.114-119
• /
• 2003

Passengers are much interested in ineroir noise caused speed-up and mass reduction of railway vehicles. Generally, the major noise source for passenger cars are rolling noise and aerodynamic noise. The purpose of this paper is to evaluate the noise level and to analyze the noise sources for domestic and KTX trains. We also measured the interior noise and the rolling noise for passenger cars. In result, the noise level is below 65dBA for Seamaeul coachs, and below 66dBA for KTX coachs.

• Journal of Korean Society of Transportation
• /
• v.23 no.2
• /
• pp.75-82
• /
• 2005

To relieve congestion in the current system of intercity transportation, the Korea decided in 1990 to construct a high-speed railroad between Seoul and Busan and it is now in operation. This new mode of transportation significantly cut travel time between major cities and a trip from Seoul to the southeastern port of Busan. Since the KTX opening, average daily passenger numbers on both the Gyeongbu and Honam lines have increased about 1.3 fold over 2003 levels. As of December 2004, the KTX trains are carrying about 81,000 people a day. On KTX routes, the daily number of airline passengers dropped. Express long-distance bus traffic also dropped by 20% to 30%, while that on short-distance routes (100km or less) increased by about 20%. These figures clearly indicate that the Korean transportation network is becoming railroad-centric. However, the number of KTX passengers is fewer than anticipated possibly due to the Korean economic downturn and the operation of the KTX will leave many existing Saemaul and Mugunghwa train sets idle, which will be put into operation for areas, not covered by the KTX. When all the existing major lines have been electrified, more high-speed rail services will be phased in using direct connections to maximize operational efficiency. And also, the dual management by KTX and conventional rail will be regarded as the promotion of the benefit of the public.

• Journal of Digital Contents Society
• /
• v.19 no.2
• /
• pp.385-392
• /
• 2018

Iksan is one of medium city in Jellabukdo, South Korea. It has a favorable natural environment for the specialization potential of natural industries and development projects. In addition, it has various historical and cultural resources including Mireuksajji, and KTX Honam line which has been opened for a representative feature as transport city. However, it faces week connection with neighboring cities and large scale of development in neighboring areas, especially in Jeonju and Gunsan. In this paper, we try to classify the urban image assets of Iksan as 'Iksan Station' and 'ktx' on keywords and analyze the possibility of being a center of transportation and logistics through big data analysis extracted from SNS and website. In comparison with Gwangju Songjeong, KTX Honam line station, which has been developed with similar regional characteristics, it is aimed to establish the basis of improvement and establishment of urban image of Iksan city in the future.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.1
• /
• pp.179-185
• /
• 2012

Since the eco-era is getting closer, the importance of noise reducing in the passenger cars of high-speed train is very important. The active noise control is best choice to reduce low frequency noise because the passive one is too heavy for high speed trains where weight is so critical. Also ANC is able to reduce the ambient noise when the environmental-factor changes. To reduce a three-dimensional closed-space sound field like a car of a high-speed rail is hard to do using single channel ANC control system. We used multi-channel FXLMS algorithm which calculation speed is fast and the secondary path estimation is possible in order to take into account the physical delay in electro acoustic hardware control loudspeaker and power amplifier. Firstly, we have measured interior noise of KTX and estimated noise path in KTX test-bed. However there was some problem related to algorithm divergence and increasing the filter order. We have made a simulation of interior environment of KTX car by using three frequency bands of 120Hz, 280Hz, 360Hz as the most important for KTX ANC system. During this research the interior noise reduction of KTX car was made by using the multi-channel FXLMS algorithm. Reduction performance was evaluated and compared each other for open space section and tunnel section. in-situ experiment for the KTX noise reduction by proposed ANC was performed based on data obtained in simulation and they were compared for open space section and tunnel section as well.

• The Korean Journal of Applied Statistics
• /
• v.32 no.1
• /
• pp.139-148
• /
• 2019

This study proposed a multiple intervention time series model to predict KTX passenger demand. In order to revise the research of Kim and Kim (Korean Society for Railway, 14, 470-476, 2011) considering only the intervention of the second phase of Gyeong-bu before November of 2011, we adopted multiple intervention seasonal ARIMA models to model the time series data with additional interventions which occurred after November of 2011. Through the data analysis, it was confirmed that the effects of various interventions such as Gyeong-bu and Ho-nam 2 phase, outbreak of MERS and national holidays, which affected the KTX transportation demand, are successfully explained and the prediction accuracy could be quite improved significantly.