• Journal of the Korean earth science society
• /
• v.36 no.3
• /
• pp.222-235
• /
• 2015

Samples were collected from both places including the coastal area within the height of 5 m above the mean sea level (msl) (DH) and the top of the coastal terrace of 10-15 m msl (KS) high in Gwangseungri, Gochanggun, Korea. To find the origin of the deposit in the coastal area, granulometric analysis and geochemical analysis were performed. The result showed that the DH samples were originated from the reddish soils overlaying weathered bedrock which presented gradual change of chemical composition from the bottom toward the top. Clay minerals were found from the DH samples. These results concluded that the DH samples were found as in-situ weathered materials. The KS samples were originated from the soil layer covering gravel layer at the foot slope of the hill along the coast. The KS samples contained different chemical compositions from the DH. It is inferred that some of this layer was disturbed or experienced the influx of foreign material. The particle size of the KS samples was different from those found on the beach. The particle size of lower parts of KS site was finer than that on the beach, but the particle size of middle part of the site was coarser than that on the beach. The sorting of the KS site was poorer than that on the beach. Thus, it is inferred that some parts of the layer were formed by short-lived high energy event rather than sustained and continuous action of tidal currents and/or waves. Analysis using an optically stimulated luminescence (OSL) method showed that the burial age of samples from KS site were found 0.65-0.71 ka. Though the characteristics of the sediment layer and forming event in this area should be further studied, it can be inferred that this sedimentary layer formed by coastal flooding with storm.

• Journal of Sasang Constitutional Medicine
• /
• v.32 no.1
• /
• pp.30-38
• /
• 2020

Objectives The purpose of this study is to reduce the question items in Korea Sasang Constitutional Diagnostic Questionnaire (KS-15) and to assess the validity. Methods The subjects of this study were 1,553 people who had information on body shape, personality, and symptoms among the data established at the Korean Medicine Data Center. Among them, 155 people were separated into a test group to assess the validity, and the remaining 1,398 were used as training groups for model development. The reduction question items were finally confirmed through discussion by two experts. The model development went through Multinomial Logistic Regression. Results & Conclusions The Percent Correctly Predicted (PCP) in the test group was 60.00% (58.49% in men and 60.78% in women). The PCP of each constitution was 72.6% in Taeeumin, 53.3% in Soeumin, and 50% in Soyangin. The accuracy rate of KS-10 seems to be reasonable considering the ease of use of reduced time required.

• Journal of Korean Society for Quality Management
• /
• v.15 no.2
• /
• pp.55-60
• /
• 1987

A rectifying inspection plan which assumes a gamma - prior distribution on the lot percent defective is considered. This sampling inspection plan is developed for finite lot sizes with matching OC curves and generated from an initial plan selected from KS A 3102 single sampling by attributes. Comparisons are made with each plan by three examples.

• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.1
• /
• pp.9-15
• /
• 2009

Purpose: The aim of this study is to examine various national standards and to suggest problems and improvements on KS (Korean Industrial Standards) in spectacle frames. Methods: We surveyed the latest published KS, ISO (International Organization for Standardization), JIS (Japanese Industrial Standards), DIN (Deutsches Institut fur Normung) and ANSI (American National Standards Institute) standards with relating spectacle frames. The titles that were considered in comparative study were terms and vocabulary, measuring system and terminology, marking, requirements and test methods, formers, screw threads, and others. Results: There were 9 different languages such as English (USA and UK), French, Russian, Japanese, Chinese, German, Italian and Spanish for the lists of equivalent terms and vocabulary in all standards except KS and ANSI, but gave an explanation for terms and vocabulary in only KS. Complementary terms and definitions were not existed in annex of KS and ANSI for measuring system and terminology, but they were included in annex of standards of the others. KS and ANSI standard for requirements and test methods differed from the ISO revision. Except JIS and ANSI, standards of formers were almost identical. KS standard of screw threads were similar to JIS. Standards of welded joints and nickel release did not exist in KS. Conclusions: All standards except ANSI tend to follow ISO, especially DIN is almost entirely identical to ISO. But KS is behind the times because it has been amended lately or established in accordance with older editions of ISO. Therefore, in order to assist quality control and safety for spectacle frames, KS standards shall be superseded by the specifications which is identical to ISO within a reasonable time.

• Geotechnical Engineering
• /
• v.7 no.4
• /
• pp.25-34
• /
• 1991

In this study, relationships between CBR values tested by Korean Standards (KS CBR) and the elastic moduli from CU compression tests are developed for the subgrade soils. Triaxial compression and KS CBR tests are carried out on five types of samples from 15 points in Korean ezpressways. Triaxial compression tests are performed under 3 types of coifining pressures to generalize the CBR -elastic modulus relationship as functions of confining pressured and mean principal stresses. From the regression analyses of experimental results, equations for relationships between the KS CBR and elastic moduli of roadbed Boils are proposed. An equation for the relation- ship between the KS CBR and the maximum dry density of roadbed soil is also proposed.

• The Journal of the Korea Contents Association
• /
• v.15 no.12
• /
• pp.650-659
• /
• 2015

This study reports on the perspectives of Korean Chinese Japanese students (KS CS JS) on learning English at multi-cultural classrooms in Korea. The participants were 32 KS, 10 CS, and 14 JS in EFL writing classes, and the data comprised open-ended questionnaires and interviews. In analyzing the data, 'Intentional content analysis' and 'Critical discourse analysis' were adopted. The findings show that the learning of English in Korea was supported by 80% of JS, 71.9% of KS, and 50% of CS. The highest satisfaction of JS was caused by rich interactions with others. English speaking was the most difficult area for all the groups. Whereas KS (43.8%) used only Korean, CS and JS used both English and Korean for communication. Most KS (78.1%) hesitated to socialize with foreign students despite their wishes. These findings suggest that a variety of programs should be developed so that students share different cultures and use more English in the multi-cultural Korean context.

• Journal of Life Science
• /
• v.7 no.2
• /
• pp.112-118
• /
• 1997

In previous paper Pseudomonas sp. Ks-96 isolated from the bioconversion into pyrogallol from gallic acid . Continuous bioconversion of pyrogallol was carried out using rotatory disc contactor immobilized Pseudomonas sp. Ks-96 . Enzyme activity of gallate decarboxylase released from Pseudomonas sp. Ks-96 were shown at the highest activity on 24h incubation. Culture media containing gallic acid supplied on the flow rate of 20m${\ell}$/h until thickness of cells wall reached steady state. Bioconversion rate of pyrogallol from gallic acid showed at highest level ranging from 18hr to 36h according to time courses. Continuous bioconversion of pyrogallol using rotating disc contactor was about 82% and 80% between 6 and 8 days at the feeding rate of 300m${\ell}$ per hour in the medium containing 15g/${\ell}$ gallic acid.

• 우유
• /
• s.45 summer
• /
• pp.15-31
• /
• 1991

• JOURNAL OF ELECTRICAL WORLD
• /
• no.8 s.68
• /
• pp.15-18
• /
• 1982

• Journal of the Korean Wood Science and Technology
• /
• v.11 no.3
• /
• pp.39-48
• /
• 1983

This research was performed to investigate the manufacturing possibility of the particleboard treated with commercial fire retardant chemicals. Laboratory test boards at this investigation were made from particles treated by soaking into 5, 10, 15, and 20 percent concentration solutions of ammonium sulfate and Minalith before resin was applied. According to the results, MOR (modulus of repture) and MOE (modulus of elasticity) in flexure exceeded type 100 (100 kgf/$cm^2$, $1.5{\times}10^4\;kgf/cm^2$) of the Korean Industrial Standard (KS F 3104). Except for 15 and 20 percent chemicals concentrations of Minalith, every internal bond stress values met type 100 (1.5 kgf/$cm^2$) of KS F 3104. However thickness swelling values of fire retardant treated particleboards were not reached in the Standard (12%).