• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.42-49
• /
• 2017

To replace phthalate plasticizer for PVC, acetylated monoglyceride (AMG) plasticizers were prepared from plant oil and their plasticization effects were also investigated. Transesterification of coconut oil by glycerol followed by acetylation with acetic anhydride gave AMG-CoCo (Coco : Coconut Oil). In addition, AMG-GMO (GMO : Glycerol monooleate) and AMG-GMO-Epoxy were synthesized by acetylation and epoxidation with glycerol monooleate. It was found that the thermal stability of AMG plasticizers increased in the following order: AMG-GMO-Epoxy > AMG-GMO > AMG-CoCo and all three plasticizers were thermally more stable than those of common petroleum-based plasticizer DOP (Dioctyl phthalate). The tensile strain values of the PVC containing AMG compounds were ca. 770~810%, while tensile strength values were ca. 19~22 MPa, which were higher than those of PVC containing DOP. DMA (Dynamic Mechanical Analysis) results showed that the miscibility of AMG-GMO-Epoxy in PVC was excellent and the $T_g$ of PVC containing AMG-GMO-Epoxy at 50 phr decreased down to $24^{\circ}C$. Finally, the leaching experiment result showed that the weight loss values of PVC containing AMG-GMO and AMG-GMO-Epoxy at 50 phr were as low as 2 and 1%, respectively, indicating that they have high water migration resistance. The above findings suggested that AMG-GMO-Epoxy could be one of plant oil-based PVC plasticizers to replace DOP.

• Korean Journal of Weed Science
• /
• v.15 no.3
• /
• pp.183-187
• /
• 1995

The germination characteristics of Diplachne fusca (L.) P. Beauv. seeds were investigated under different seed storage conditions to find out reliable system for maintaining the seeds with high and uniform germination rate and thus for possible use of the seeds in herbicide screening with a continuous seed supply. When the seeds were stored under wet-low temperature($4^{\circ}C$) condition, the germination rate was 88% after 4-week-storage. The germination rate slightly declined after the storage for longer than 3 months. Dry seeds stored at room temperature exhibited very low germination rate. The wet-low temperature treatment was effective for inducing the germination of the seeds which had been stored under dry-room temperature condition for 4 months. The germination rate was 70% after 2-week- storage under the wet-low temperature condition. The germination rate was much higher under an alternate temperature condition than under a continuous temperature condition. The optimum temperature was 35/$25^{\circ}C$(14/10hrs). The seeds had a capability to germinate under NaCl-treated condition even at a concentration of 1.0%, whereas the germination of Echinochloa crus-galli seeds was completely inhibited by 0.5% NaCl. This result indicates that D. fusca has an advantage over E. crus-galli to survive in reclaimed 1and from the sea.

• Applied Chemistry for Engineering
• /
• v.23 no.2
• /
• pp.176-182
• /
• 2012

The methane dry reforming has received the considerable attention in recent years, mainly as an attractive route to produce synthesis gas (CO, $H_2$) from green-house gases ($CH_4$, $CO_2$) for resources. However, this process has not been commercialized due to the high temperature and catalyst deactivation. In this study, Co-Ru-Zr catalysts supported on $SiO_2$ were studied for the characterization of methane dry reforming reaction and the preliminary data for process development were achieved. The crystal structure of catalysts was measured by XRD, the surface area and pore size were analyzed by BET, and the element composition of catalyst were analyzed by EDS. Conversions of methane and carbon dioxide were analyzed by GC. In addition, reaction rate constants were obtained from the reaction kinetic study and the optimum catalyst size that does not affect mass transfer from reactants was also determined. The selected pellet-type catalyst maintained activation for 720 h at $850^{\circ}C$.

• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.652-656
• /
• 2018

In this study, effects of the reaction pressure were studied for petroleum-based pitch synthesis. A two-stage reaction process was performed based on different reaction pressure conditions. Each stage experiments for the two-stage reaction were consecutively carried out. The first stage was consisted of three different pressure conditions; high (10 bar), normal and low (0.1 bar). And the second stage was carried out at the normal and low (0.1 bar) pressure. The pitch synthesis was realized at $400^{\circ}C$ for 2 h. Thermal properties and molecular weight distributions of each samples were investigated by analyzing the softening point and MALDI-TOF data. Volatilized components during the pith synthesis were measured by GC-SIMDIS. In case of the first-step reaction with the high pressure condition, the low molecular weight component participated to the pitch formation more effectively and the pitch with the low softening point was obtained. However, for the case of the first-step with the low pressure, the low molecular weight component was vent outside and the partial coke formation occurred. Eventually, pitch properties such as the softening point and yield were controlled effectively by changing the pressure in the pitch synthesis reaction.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.7
• /
• pp.2097-2099
• /
• 2010

• Carbon letters
• /
• v.17 no.1
• /
• pp.70-73
• /
• 2016

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2002.05a
• /
• pp.34-45
• /
• 2002

The new measuring method of micro-stickies considering both the effects of charge neutralization and evaporation of process water was developed by KRICT PPRC. By the new KRICT method, the contamination of metal dryer surface and other machine clothes could be estimated quickly and simultaneously. According to this study, it could be confirmed that the novel method is a useful one for the evaluation of several treatments regarding the reduction of stickies troubles.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.317-319
• /
• 2008

Photo-alignment layer which contains cinnamate is difficult to generate pretilt angle of liquid crystals. In order to enhance pretilt angle, blending poly (amic acid) between containing fluorine poly (amic acid) and 1,2,3,4-cyclobutanetetracaroxylic dianhydride (CBDA) / 3,5-diaminobenzyl alcohol (DBA) were used. For photoreaction, cinnamate was conjugated by interfacial reaction with blending polyimide.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.257-260
• /
• 2014

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.867-870
• /
• 2007

In order to solve image sticking phenomena, the gas-phase and liquid-phase interfacial reactions of photosensitive polyimide can annihilate photoreactive carbon-carbon double bonds, which remain after photo-alignment process. The annihilation processes dramatically affect residual DC and photochemical reorientation of photoactive functional groups.