• Railway Journal
• /
• v.18 no.4
• /
• pp.11-12
• /
• 2015

• Proceedings of the Optical Society of Korea Conference
• /
• 1989.06a
• /
• pp.5-16
• /
• 1989

• Journal of Environmental Science International
• /
• v.19 no.12
• /
• pp.1375-1384
• /
• 2010

The purpose of this research is to understand the change of runoff characteristics by estimated spatial rainfall. Therefore, this paper largely composed of two parts. First, we compared the simulated result according to estimation method, ID(Inverse Distance Method, ID2(Inverse Square Distance Method), and Kr(General Covariance Kriging Method), after letting miss rainfall data to the observed data. Second, we reviewed the runoff characteristics of the distributed runoff model according to the estimated spatial rainfall. On the basis of Yuseong water level station, we select the target basin as Gabchun watershed. We assumed 1 point or 2 point of the 6 rainfall gauge stations in watershed were missed. We applied the spatial rainfall distributed by Kr to Hy-GIS GRM, distributed runoff model. When 1 point rainfall data is missed, Kr is superior to others in point rainfall estimation and runoff estimation of Hy-GIS GRM. However, in case rainfall data of 2 points is missed, all of three methods did not give suitable result for them. In conclusion, Kr showed better applicability than other estimated methods if rainfall's data less than 2 points is missed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.1
• /
• pp.161-166
• /
• 2016

We studied the effect of $Co^{60}$ gamma-radiation on the FBGs by a variation of grating the fabrication parameters. The FBGs were fabricated in a different UV KrF laser intensity using the same boron co-doped photo-sensitive fiber and exposed to gamma-radiation up to a dose of 33.8 kGy. According to the experimental data and analysis results, We confirmed that the laser intensity for grating inscription has a highly effect on the radiation sensitivity of the FBGs and the radiation-induced Bragg wavelength shift by the change of laser process condition showed a difference more than about 30 %.

• Journal of Korean Society of Transportation
• /
• v.34 no.3
• /
• pp.234-247
• /
• 2016

As the necessity of the evaluation of environmentally-friendly traffic operations strategies becomes obvious, the characteristics of fuel consumption models should be comprehended in advance. This study selected three fuel consumption models developed in Korea and another three models widely used in North America, and compared their applicabilities. Specifically, the national institute of environmental research (NIER) drive modes and the VISSIM software were utilized to model various driving patterns, and their fuel consumptions were estimated using the fuel consumption models. Based on the results, all the models showed the similar results in the analysis of the most fuel efficient cruising speed. On the other hand, caution should be taken when using the KR-1 and KR-2 models in microscopic analyses because they are not sensitive to instantaneous power requirements of vehicles.

• Horticultural Science & Technology
• /
• v.28 no.4
• /
• pp.672-677
• /
• 2010

A duplex PCR method was developed to detect a transformation vector pSPB130 used in the development of a genetically modified (GM) rose plant. To detect a GM rose plant, the anthocyanin synthase ($ANS$) was used as an endogenous reference gene of rose in PCR detection. The primer pair RHANS-KF/KR producing 107 bp amplicon was used to amplify the $ANS$ gene and no amplified product was observed in any of the 9 different plants used as a template. The primer pair GMRH-KF/KR was designed to amplify the junction sequence between 35S promoter and flavonoid 3',5'-hydroxylase ($F3^{\prime}5^{\prime}H$) gene in pSPB130. The detection limit of the duplex PCR method is approximately 0.5%. This result indicates that this duplex PCR method could be useful for monitoring unauthorized GM rose in Korea.

• Journal of Energy Engineering
• /
• v.27 no.2
• /
• pp.55-60
• /
• 2018

In this study investigated the Controlled Low Strength Materials using coal ash and steel slag(KR slag) as the main material in the thermal power plant classified as waste resource. Bottom ash and KR slag are mixed at a ratio of 7: 3 to expand the use of industrial by-products through carbonate($CO_2$-fixation) reactions and inhibit the exudation of heavy metals. The results showed that the water content increased as the content of bottom ash increased. It was confirmed that as the powder content increased, the bleeding ratio decreased. Also, as the content of one kind of ordinary portland cement (OPC) decreased, activation of hydration reaction decreased and compressive strength decreased. However, when the mixed composition is appropriately adjusted, the compressive strength of 2.0 MPa required for the controlled low-strength material can be satisfied.

• Journal of the Korean Ceramic Society
• /
• v.30 no.9
• /
• pp.731-739
• /
• 1993

R-curve measurements were performed on Al2O3(matrix)-ZrO2-SiC whisker composite and Al2O3-ZrO2, Al2O3-SiC whisker composites in the favor of comparing the effect of ZrO2 and SiC whisker, as a second phase, to Al2O3 matrix. Al2O3-SiC whisker and Al2O3-ZrO2-SiC whisker were fabricated by hot pressing at 1$700^{\circ}C$, 15MPa and Al2O3-ZrO2 by pressureless sintering at 1$600^{\circ}C$. A controlled flaw/strength technique was utilized to determine fracture resistance as a function of crack extension and R-curve behaviour was determined from the relationship which is KR=K0(Δa)m. R-curveresults were KR=6.173$\times$Δa0.031 for Al2O3-ZrO2, KR=18.796$\times$Δa0.172 for Al2O3-SiC whisker and KR=11.96$\times$Δa0.110 for Al2O3-ZrO2-SiC whisker composite. From the analysis of R-curve and expeirmental data above three composites, it is found that R-curve behaviour of Al2O3-ZrO2-SiC whisker composite was dominated initially by the strengthening effect of ZrO2 and after, some extended crack were influenced by the effect of SiC whisker. Analysis of SEM and X-ray data revealed that whisker bridging in the crack wake and whisker pull-out mechanisms were the main mechanism for the R-curve behaviour.

• Journal of the Korean Geophysical Society
• /
• v.9 no.4
• /
• pp.311-320
• /
• 2006

Digital filters designed using wavelet theory are applied to bathymetry data acquired from KR5 area of Korea Deepsea Mining Area. The filters used in this study are the linear B-spline wavelet filter and derivative of a Cubic B-spline filter. With proper tuning of the digital filters, we can identify the location and orientation of the abyssal hill and abyssal trough in bathymetry. These features obtained from the digital filters are well correlated with bathymetric image. This quantitative information, which can be used to understand the underlying geophysical processes, can be further processed to obtain the spacing, orientation and distribution of the abyssal hill. This wavelet analysis of bathymetry provides good data to select the mining site.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.4
• /
• pp.311-320
• /
• 2014

Rotor blades are important devices that affect the power performance, efficiency of energy conversion, and loading and dynamic stability of wind turbines. Therefore, considering the characteristics of a wind turbine system is important for achieving optimal blade design. When a design is complete, a design evaluation should be performed to verify the structural integrity of the proposed blade in accordance with international standards or guidelines. This paper presents a detailed exposition of the evaluation items and acceptance criteria required for the design certification of wind turbine blades. It also presents design evaluation results for a 2-MW blade (KR40.1b). Analyses of ultimate strength, buckling stability, and tip displacement were performed using FEM, and Miner's rule was applied to evaluate the fatigue life of the blade. The structural integrity of the KR40.1b blade was found to satisfy the design standards.