• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.11a
• /
• pp.23-28
• /
• 2004

Various merchandises have appeared in recent markets of mineral water, beverage, food and cosmetics etc. These are almost manufactured by adding raw seawater, desalinated water, brine or salt from Deep Ocean Water(DOW), and it intimated desalination and mineral extraction are key techniques for DOW business. This study aims to verify the functional performance of mineral-controlled water produced by the basic methods which were proposed by authors for industrial purposes. This water revealed the possibility of the radical scavenging effects and moisturizing capability.

• Journal of Microbiology
• /
• v.42 no.4
• /
• pp.305-314
• /
• 2004

An exopolysaccharide-producing microalgal dinoflagellate was isolated from a red-tide bloom and des­ignated strain KG03. A bacteria-free culture of strain KG03 was achieved using a modified wash with phototaxis and antibiotic treatment. Combined treatment with neomycin and cephalosporin was the most effective for eliminating the bacteria associated with the microalgae. Strain KG03 was identified as Gyrodinium impudicum by analyzing the ITS regions of the 5.8S rDNA, 18S rDNA, morphological phenotype and fatty acid composition. The exopolysaccharide production and cell growth in a 300-ml photobioreactor were increased 2.7- and 2.4-fold, respectively, compared with that in a flask culture at the first isolation step.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.1
• /
• pp.55-61
• /
• 2011

This paper presents bubble wake measurement results generated by the planing hull. The bubble was generated by SNAME TMB model(No. 4876) with hard chine at the CWC(Circulating Water Channel). ABS(Acoustic Bubble Spectrometer) was used to measure bubble wake measurement. The manufactured model is one meter in length and uniform velocity to generate the bubble at CWC is 3m/s, relatively higher speed than conventional hull form. Measurements were performed successfully and measured results show well the general characteristics of bubble wake generated by planing hull. Furthermore, experimental equations are proposed for the practical use.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.2 s.152
• /
• pp.83-92
• /
• 2007

To improve the fire safety of ships, it is required to prepare the systematic design guideline for fire protection and the way of assessing fire characteristics quantitatively. The introduction of simulation technique based on fire engineering is useful to assess fire safety performance quantitatively. Fire simulation tools are currently developing with U.S.A., Europe and Japan as a leader. Most of current fire simulation tools were developed for building or inland structure. Therefore it is required validation process and development of data base to apply maritime environments. In this paper, I/O parameters of simulation tools such as CFAST and BRI2002 of zone model and FDS and KFX of field model analysed, and designed data base considering maritime environment. The fire simulation for the pool fire model of engine room and its adjacent compartments is performed and evaluated the results.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.1
• /
• pp.17-26
• /
• 2012

A coupled analysis of a floating crane barge with a crane wire and hanging structure is carried out in thetime domain. The motion analysis of the crane barge is based on the floating multi-body dynamics, and thecrane wire is modeled as a simple spring tension. The hanging structure is assumed to be a rigid body with 3 degree-of-freedom translational motion. In this study, numerical simulations were conducted at three different stages. First, the developed code was validated by comparing the time-domain motion response of a crane barge with the frequency-domain results. Then, a coupled analysis of a crane barge and simple structure hanging by the crane wire was performed using the present scheme. The motion response and wire tension from the present calculations are compared with the results of OrcaFlex. The agreement between the two sets of results isfairly good. Last, lowering simulations in regular and irregular waves were conducted considering buoyancy changes in the hanging structure. The effects of the wave conditions, structure's weight, wire length, and lowering speed on the wire tension are considered.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.1
• /
• pp.93-98
• /
• 2010

In this paper, PLC which can be installed easily and is stable to transfer datum, is tested for approving its application in a real ship. Internet access service, CCTV monitoring, light control and huge sensor communications are needed for enhancing the convenience and safety of passengers and crew in ships. In order to apply PLC in ships, we surveyed some noises interrupting PLC in ships and investigated the PLC characteristics. The Hannara, a training ship of Korea Maritime University, was used for the test. We measured and analyzed blocking noises using by NI's SCXI-1001. When noises of specific frequency band occurred near the PLC frequency band, PLC transfer capacity was low for mass datum. We developed and verified some methods to apply PLC in a ship under lots of noises.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.319-322
• /
• 2006

The Deep-sea miner system is composed of body, actuators, sensors, and devices for control and monitoring. At present, we are manufacturing the miner's body included actuators and already consisted with off-the-shelf embedded controller. But sensors and those devices were just determined. To previously test performance of embedded controller which manages control and monitoring of miner system, its simulator must be developed for control and monitoring. Hardware-In-the-Loop(HIL) simulation is being increasingly used in industrial applications. This is an effective tool for the evaluation of electric system and drives. In the HIL simulator, we can test and design the control and monitoring system freely without the risk of hardware ruins and the load of expenses. Also the programming software for miner operating is verified on the HIL simulator. In this paper, we introduce the concept of HIL simulator for control and monitoring of deep-sea miner.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.1
• /
• pp.16-23
• /
• 2009

The three-dimensional ship motion with forward speed was solved by a finite element method in the time domain. A boundary value problem was described in the frame of a fixed-body reference, and the problem was formulated according to Double-Body and Neumann-Kelvin linearizations. Laplace's equation with boundary conditions was solved by a classical finite element method based on the weak formulation. Chebyshev filtering was used to get rid of an unwanted saw-tooth wave and a wave damping zone was adopted to impose a numerical radiation condition. The time marching of the free surface was performed by the 4th order Adams-Bashforth-Moulton method. Wigley I and Wigely III models were considered for numerical validation. The hydrodynamic coefficients and wave exciting forces were validated by a comparison with experimental data and the numerical results of the Wigley I. The effects of the linearization are also discussed. The motion RAO was also checked with a Wigley III model through mono-chromatic and multi-chromatic regular waves.

• Ocean and Polar Research
• /
• v.32 no.4
• /
• pp.475-482
• /
• 2010

Hydrothermal deposits on deep-sea floors are expected to provide potential metal resources for future demands. Korea was recently granted a prospecting licence to undertake exploration for hydrothermal metal deposits in the exclusive economic zone (EEZ) of the Kingdom of Tonga in the Pacific Ocean. The Korean Deep Seabed Mining Group (KDSMG), which consists of four Korean companies involved in marine technologies, oil and gas shipping, and smelter industries, has conducted research to evaluate the region's resource potential in cooperation with the Ministry of Land, Transport and Maritime Affairs (MLTM) of Korea. Here we present and reflect on the exploration results of these companies and their strategic plans. We also evaluate Research and Development (R&D) progress for the commercial development of seafloor hydrothermal deposits. Our own strategies and prospects for the commercial development of this potential resource are also outlined. We do acknowledge that other potentially important information regarding the amount of ore body, the inside structure, and the metal yields have not yet been clarified sufficiently. As such it is necessary to address these problems through experimental R&D and surveys.

• The Korean Journal of Malacology
• /
• v.27 no.1
• /
• pp.29-33
• /
• 2011

This study was conducted to investigate the recruitment pattern of sessile organisms on the artificial substrates of PVC in Jangmok Bay, Geoje Island, southern coast of Korea. Five PVC plates were submerged from March to October, 2007 at one month interval, and two plates were retrieved after one month. The dominant recruiters were a green algae, Entermorpha prolifera in March, Mytilus galloprovincialis in April, M. galloprovincialis and Styela plicata in May, S. plicata and Bugula sp. in June. During August, Balanus amphtrite and anthozoans were dominant recruiters, and a serpulid worm, Hydroides ezoensis in October. There was a clear specific recruiting period of sessile faunas depending on their reproduction cycles in a sheltered embayment like Jangmok Bay.