• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.345-359
• /
• 2002

The purpose of the study was to provide the fundamental data to instruct athletes through the analysis athletes' movement in javelin. Three athletes in the level of national representative were participated in this study. The study analyzed kinematic variables(lead foot and releasing javelin) through 3-D analysis and obtained the following results. 1. During withdrawal, it is important to maintain of running horizontal velocity. 2. It was showed that throng average height was $84{\pm}3.3%$ and javelin adequative degree, Among the athletes, $S_2$ who had the best record was released the javelin with the fast velocity, but throw the javelin with the less releasing velocity. 3. $S_2$ released after lead foot were completely landed and therefore it is no problem in a kinematic aspect. However, $S_1$ angle was too small. it caused increase of release velocity to be prevented. 4. $S_2$ showing the best result indicated shorter in duration time. Generally, the shorter duration time in release phase showed the longer release distance. Especially $S_1$ and $S_3$ showing the worse result indicated the longer duration time in preparatory phase, causing the breakup of force. Therefore to improve the record, it should be decreased the duration time in preparatory phase. 5. Compared with $S_1$ and $S_3$, $S_2$ showing the best record indicated the higher velocity in center of mass, trunk, upper arm, lower arm and hand That is the higher velocity of upper arm at release leaded the better velocity transfer from upper arm to following lower arm and hand, these action should be considered to be helpful of better record. According to the above conclusion, when the athletic leaders cauch athletes, they should focus on maintaining knee angle, upper body and hip angle in a previous stage of release and throwing angle, throwing height, throwing velocity in a release stage.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.6
• /
• pp.583-595
• /
• 2015

Objective: The purpose of this study was to determine the reliability of lower limb joint angles computed with the software ImageJ during jumping movements. Background: Kinematics is the study of bodies in motion without regard to the forces or torques that may produce the motion. The most common method for collecting motion data uses an imaging and motion-caption system to record the 2D or 3D coordinates of markers attached to a moving object, followed by manual or automatic digitizing software. Above all, passive optical motion capture systems (e.g. Vicon system) have been regarded as the gold standards for collecting motion data. On the other hand, ImageJ is used widely for an image analysis as free software, and can collect the 2D coordinates of markers. Although much research has been carried out into the utilizations of the ImageJ software, little is known about their reliability. Method: Seven healthy female students participated as the subject in this study. Seventeen reflective markers were attached on the right and left lower limbs to measure two and three-dimensional joint angular motions. Jump performance was recorded by ten-vicon camera systems (250Hz) and one digital video camera (240Hz). The joint angles of the ankle and knee joints were calculated using 2D (ImageJ) and 3D (Vicon-MX) motion data, respectively. Results: Pearson's correlation coefficients between the two methods were calculated, and significance tests were conducted (${\alpha}=1%$). Correlation coefficients between the two were over 0.98. In Vicon-MX and ImageJ, there is no systematic error by examination of the validity using the Bland-Altman method, and all data are in the 95% limits of agreement. Conclusion: In this study, correlation coefficients are generally high, and the regression line is near the identical line. Therefore, it is considered that motion analysis using ImageJ is a useful tool for evaluation of human movements in various research areas. Application: This result can be utilized as a practical tool to analyze human performance in various fields.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.1
• /
• pp.21-30
• /
• 2008

The purpose of this study was to investigate the variability to compare local dynamic stability via a linear and nonlinear analysis during walking. Twenty four elderly males, 12 healthy elderly and 12 patients with osteoarthritise walked on a treadmill for 100 consecutive strides. Lyapunov exponent and correlation dimension and coefficient variation were calculated for the kinematic parameters to determine the dynamic stability during walking. The linear measures indicated that the healthy elderly demonstrated significantly higher variability in the ankle joint displacement. The nonlinear analysis revealed that COD for the knee joint angle were higher in patient with osteoarthritise. There were no coincidence in results between linear and nonlinear techniques over two groups. In light of nonlinear analysis, it was concluded that patients with osteoathritise showed higher local instability during walking.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.364-375
• /
• 2009

The purpose of this study is to offer basic data for the fall prevention by analyzing the kinematic difference between the lower limb joints and the lower extremities in elderly people's walking given the lower-limb resistance exercises. For this, three-dimensional image analysis was carried out by selecting 7 elderly women from over 70s to under 80 years old. To obtain the three-dimensional location coordinates in the lower limb joints and the lower extremities, it shot with 100Hz/s by using MCU(Qualisys, Sweden) camera. The shot image gained raw data on the location coordinates by using QTM(Qualisys, Sweden). As a result of calculating three-dimensional angle by using program of Matlab 6.5, the following conclusions were obtained. Flexion and extension in the thigh and the lower-leg extremities were indicated to be big in motion of flexion after exercising at E5. Foot segment indicated statistical difference while showing eversion at E4. Knee joints showed flexion at E4 after exercising. Ankle joints showed statistical difference while indicating motion in inversion at E3 and in eversion at E4(p<.05).

• The Journal of Korean Physical Therapy
• /
• v.28 no.2
• /
• pp.106-111
• /
• 2016

Purpose: The aim of this study is to determine the effect of glenohumeral (GH) rotation position in modified knee push-up plus exercise (MKPUP) by examining the surface electromyography (EMG) amplitude in serratus anterior (SA), pectoralis major (PM), and upper trapezius (UTz) and the activity ratio of each muscle. Methods: A total of 22 healthy subjects volunteered for the study. Each subject performed the MKPUP at $0^{\circ}$, $45^{\circ}$, and $90^{\circ}$ of GH joint internal rotation. EMG of the SA and PM, UTz was compared between GH rotation positions and each muscle activity ratio. EMG was used to measure the muscle activity in terms of ratios to maximal voluntary isometric contraction (MVIC). Results: The difference in EMG activity during the exercise in three GH joint internal rotation positions was observed with the SA and the PM. The greater the GH joint internal rotation angle was, the lower the activity of the PM. In contrast, the SA showed higher activity. However, the activity of UT was similar under all conditions. The ratio of the SA and the PM was considerably greater at $90^{\circ}$ GH joint internal rotation than at $0^{\circ}$ and $45^{\circ}$. Conclusion: When excessive activation of the PM or imbalanced activation between the PM and the SA occurs, the MKPUP exercise is most effective at $90^{\circ}$ of GH joint internal rotation. Use of this position would be a beneficial strategy for selective strengthening of the SA and minimizing PM activation.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.2
• /
• pp.223-230
• /
• 2011

The purpose of this study was to analysis the effect of form and hardness of outsoles on the motion of the lower extremity joints and on foot pressure during gait. The subjects were 15 women(mean age, $48.5{\pm}2.4$ years), who had no serious musculoskeletal, coordination, balance or joint/ligament problems within 1 year prior to the study. The pelvic tilt, joint angles at the lower extremities and the vertical ground reaction force(GRF) were compared during gait with 3 types of shoes (A, B, C) by using one-way repeated ANOVA(p<.05). During gait, the peak tilt angle and the range of motion(ROM) of the ankle and knee joints were found to be significantly different among the 3 types of shoes. The type C shoes showed a significantly lower mean second maximum vertical GRF than types A and B. The curved outsoles of type C shoes, which had a form and hardness different from those of A and B, was designed strategically for walking shoes to provide stability to the Additionally, type C induced the dispersion of eccentric pressure and made the center of pressure roll over to the center line of the foot.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.2
• /
• pp.161-171
• /
• 2011

The purpose of this study was to identify biomechanical characteristics of glide and delivery motion of In-Sung Hwang, player who is a member of the national team among the finalists in the men's shot put at the 2010 National Sports Festivals. Three-Dimensional motion analysis using a system of 3 video cameras at a sampling frequency of 60 Hz was performed for this study. During the glide and delivery phase the results showed following characteristics; 1) The glide type was suitable for the short-long technique, but the trajectory of shot at the glide and delivery phase showed a different trajectory pattern with "S-shaped" type of elite players due to many deviating from central axis of the APSS(athletic-plus shot system). 2) Left knee was more flexed during failed trials compared to successful trials but COG was higher. Therefore, the player showed less stability of COG as he may not get enough breaking force at the left foot. 3) Furthermore, it would be required to have strong muscle power at the trunk, throwing arm, and the lower extremity in order to achieve maintain a low projection angle of the release.

• Physical Therapy Korea
• /
• v.24 no.4
• /
• pp.1-10
• /
• 2017

Background: Flexion-relaxation phenomenon (FRP) was a term which refers to a sudden onset of myoelectric silence in the erector spinae muscles of the back during standing full forward flexion. Hamstring muscle length may be related to specific pelvic and trunk movements. Many studies have been done on the FRP of the erector spinae muscles. However, no studies have yet investigated the influence of hamstring muscle flexibility on the FRP of the hamstring muscle and lumbopelvic kinematics during forward bending. Objects: The purpose of this study was to examine the flexion-relaxation ratio (FRR) of the hamstring muscles and lumbopelvic kinematics and compare them during forward bending in subjects with different hamstring muscle flexibility. Methods: The subjects of two different groups were recruited using the active knee extension test. Group 1-consisted of 13 subjects who had a popliteal angle under $30^{\circ}$; Group 2-consisted of 13 subjects who had a popliteal angel above $50^{\circ}$. The kinematic parameters during the trunk bending task were recorded using a motion analysis system and the FRRs of the hamstring muscles were calculated. Differences between the groups were identified with an independent t-test. Results: The subjects with greater hamstring length had significantly less lumbar spine flexion movement and more pelvic flexion movement. The subjects with greater pelvic flexion movement had a higher rate of flexion relaxation during full trunk bending (p<.05). Conclusion: The results of this study suggest that differences in hamstring muscle flexibility might cause changes in people's hamstring muscle activity and lumbopelvic kinematics.

• Fashion & Textile Research Journal
• /
• v.13 no.6
• /
• pp.934-942
• /
• 2011

This study was intended to analyze conventional grading increments and methods for middle-age men's pants, and to suggest new grading guidelines that will enable to improve satisfaction with size and silhouette as a result of combining the concept of grading, which help maintain the ratio and proportion by sizes as one of ready-made apparel's advantages, with body form oriented and aesthetic approaches. In the apparel industry, the current sizing specifications and methods adopted by relevant companies, as well as the characteristics of body forms of men aged 35 to 55 years were comparatively analyzed to find out problems and ultimately to suggest their solutions or improvements. It was considered that as the conventional grading practices used in the industry were customary on the basis of the past experiences, it was required to take the body forms of target consumers into account and also, to reconsider the conventional grading methods. Analyses of sizing and specifications by brands show that 4 to 19 sizes including 82 or 84 as standard size have been produced. Since men's apparel has a large number of sizes with the large range of sizes, grading is critically important. As silhouettes depend on the distribution of grading rule values at each point of increment pattern in the main regions during grading, it is necessary to consider both size grading and form variations. To maintain an appropriate silhouette with keeping the angle of center back line of a pattern, it is desirable to set the ratio of side line part to center part from the crease line to approximately 3:7. It is required to diversify the values of grading rules according to different sizes and pattern regions in consideration for the body forms of key consumers. In addition, if the natural lines of designs and patterns for the width increments of waist circumference and hip circumference, the increments of hip width in pant's front and back panels, the ratio of grading rule values of the right and left sides of crease line, knee circumference, thigh circumference and so on are taken into account, grading will be satisfactory in the all aspects of size, silhouette and ratio.

• The Research Journal of the Costume Culture
• /
• v.8 no.4
• /
• pp.577-586
• /
• 2000

The objectives of this study were to develope slacks basic block to be used for improving the attactive silhouette and bodily fitness in ready-to-wear and educational patterns. The subjects were from 20 to 24 years old and twenty six body measurements were taken on the National Anthropometric Survey of Korea in 1977. The women in 20's think ideal body shapes are high stature, long legs, slander waist, hip, abdomen, thigh, ankle and light weight. And so it needs to be studied to studied to make slacks pattern which show slander girth and long length. The study was carried out by the following procedures. 1. Through the comparative investigation on the conventional slacks patterns of System M. Muller & Sohn, Secolli, 文化's in Japan, and Won-ja Rim's and the clothing experiment, the characteristics of every four patterns were found. 2. According to the center back slant, reflecting the change of waist circumference, thigh circumference, back crotch length, and the new suitable slacks pattern was achieved. 3. The sensory evaluation for appearance and comfort was applied to evaluate the new slacks pattern by comparing with the conventional slacks pattern. From the result of the sensory evaluation, it was found that the new slacks pattern was more suitable for appearance. 4. The new slacks pattern for women in their 20's were developed as follows ; The waist line came down 2 ㎝, the waist circumference was plus 2㎝ than originally, and the back hip circumference was larger 1 ㎝ than the front hip, the slacks length was created stature/8×4.9, the knee length was stature/8×2.7. The center back crotch length was interspaced 1∼1.5㎝ at the center front, and was at right angle the point which was raised 5㎝ at the side front. This size is not the absolute size but it helps to make the surplus on any other ready-made slacks for women.