• 한국환경농학회:학술대회논문집
• /
• 2011.07a
• /
• pp.177-187
• /
• 2011

This study was conducted to determine some physical and chemical properties of the soil and their relationship to spectroscopic-based (visible range) analytical methods while evaluating soil organic matter fractions and soil quality in degraded and non-degraded soils in a wide range of environments. Soil samples were collected from the different landscape positions of cultivated and noncultivated soils, and the latter from the same landscape positions but with different vegetation, at Songco, Lantapan, Bukidnon. The physical and chemical properties of the soils were determined at the SPAL, CMU, Musuan, Bukidnon while the metagenomic properties were determined at the Laboratory of the University of Missourri, Missourri, USA. Bulk density and air dry soil strength values of the soils from the cultivated areas were generally higher than those of the uncultivated areas. Also, soils at the summit generally had lower bulk density and soil strength values than the other landscape positions. Moreover, soils planted to camote (Ipomoea batatas) had higher bulk density and soil strength values compared to soils grown to pepper under the trees. Exchangeable calcium (Ca), magnesium (Mg), and potassium (K) and cation exchange capacity (CEC) of the soils were generally higher in uncultivated areas than those of the cultivated areas. A similar trend was observed for the potassium permanganate ($KMnO_4$)-oxidizable organic C contents determined by spectroscopic method and the total C contents determined by the Walkley-Black method. The $KMnO_4$-oxidizable organic C contents determined by spectroscopic method and the total C contents determined by the Walkley-Black method were closely related ($r=0.631^{**}$). Hence, the former method shows promise in assessing soil quality as it is a rapid test, relatively low cost and can be distributed as a field kit either with a portable spectrometer or with a color chart.

• Journal of Surface Science and Engineering
• /
• v.53 no.1
• /
• pp.22-28
• /
• 2020

In this study, manganese dioxide (MnO₂) nanoparticles were synthesized from KMnO₄ and MnCl₂·4H₂O without any dispersing agents and oxidant via ultra-high pressure homogenization process. We investigated various physicochemical properties and CO oxidation reactions of the MnO₂ nanoparticles as a function of the number of passes at 1,500 bar in a high pressure homogenizer nozzle. The observed X-ray diffraction patterns and scanning electron microscopy images revealed that the synthesized MnO₂ nanoparticles had a hexagonal structure and a uniform spherical shape. It was found from the Brunauer-Emmett-Teller measurements that the pore size of the MnO₂ nanoparticles ranged from 23.6 to 7.2 nm and their specific surface area ranged from 24 to 208 m²g^-1. In particular, it was confirmed from the measurements of CO conversion into CO₂ that CO oxidation reaction over the MnO₂ nanoparticles exhibited excellent catalytic activity at low temperatures below 100℃.

• Journal of Environmental Health Sciences
• /
• v.18 no.1
• /
• pp.63-68
• /
• 1992

This study was performed to investigate the seasonal variation of the composition of domestic solid wastes and the characteristics of the leachate sampled in In-Cheon sanitary landfill site. The results were as follows 1. Combustible part was larger than incombustible part of the domestic solid wastes in spring and sumer. 2. The food waste was major source of solid wastes in In-Cheon city as 36.5%, and its variation by seasons was negligible. 3. BOD of the leachate was in the range of 853~7, 350mg/l, and fluctuated by seasons. 4. The mean of COD$_{cr}$ Was 5, 044mg/l, the mean of COD$_{Mn}$ was 2, 212mg/l. Namely, the method by $K_{2}Cr_{2}O_{7}$ was more sensitive than the method by KMnO$_{4}$. 5. TOC was in the range of 773~3, 958mg/l, it was lower than BOD.

• Analytical Science and Technology
• /
• v.12 no.6
• /
• pp.484-489
• /
• 1999

The extraction of trace amounts of Se in volcanic rock was investigated using the hydride generation method and atomic absorption spectrophotometry. The powdered rock, 1.0 g, was decomposed with the mixture of $HClO_4$, $HNO_3$ and HF in an acid digestion bomb at $140^{\circ}C$ for 2 hours. For the reduction of Se(VI) to Se(IV) in the solution, 10 mL of 6 M HCl and 0.2 mL of 1 M KBr were added to the solution and the mixture was heated for 30~45 minutes. $H_2Se$ was produced by adding 3% $NaBH_4$ as a strong reducing agent, extracted by nitrogen gas, and was absorbed twice into $KMnO_4$solution. The contents of Se in the solution were determined by generation/AAS. According to the proposed method, 1.0 ng or more of Se was quantitatively extracted and Se levels of 2.5 ng/g or more in rock samples could be determined. For example, Se in a rhyolite was determined with the precision of $19.5{\pm}1.3ng/g$(95% confidence, n=6).

• Analytical Science and Technology
• /
• v.23 no.6
• /
• pp.566-571
• /
• 2010

This paper describes the sorption behaviors of aqueous uranium ions on the K-birnessite. K-birnessite was synthesized by adding a concentrated HCl to an aqueous solution of $KMnO_4$. Physicochemical characteristics of the K-birnessite, such as structure, specific surface area and surface charge, were investigated. K-birnessite is a layered material and the $K^+$ ions exist in the interlayer of layered K-birnessite. BET specific surface area of the K-birnessite was 38.30 m2/g. The surface charge of K-birnessite was $-1.65\;C/m^2$ at pH 5.00 and ionic strength of 0.010 M $NaClO_4$, at which the sorption experiments of uranium ions were carried out. Uranium ions were incorporated into the interlayer of the K-birnessite by cation-exchange reaction with $K^+$ ions, and the distribution coefficient is quite similar to those of common ion-exchange materials. The results might be applicable in the retardation of migration of radioactive materials from the underground disposal site of high-level radioactive waste.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.8
• /
• pp.3597-3601
• /
• 2013

In this study, a wet cleaning process, P II, using aqua-regia and sulfuric acid mixture with oxidant agent ($K_2S_2O_8$, $P_2O_5$, $KMnO_4$, $H_2O_2$ etc) is proposed to remove the metastable phase of graphite such as graphene and DLC for high quality synthetic diamonds. The process employed the conventional acid cleaning process (P I) as well as P I+P II to remove the graphite related impurities from the 200um-diamond powders synthesized at 7GPa-$1500^{\circ}C$-5minutes. The degree of cleaning after P I and P I+P II has been observed by naked-eye, optical microscopy, micro-Raman spectroscopy, and TGA-DTA. After P I+P II, the color of diamond became more vividly yellow with enhanced saturation with naked eye and optical microscopy analysis. Moreover, the disappearance of diamond-like-carbon (DLC) peak ($1440cm^{-1}$) observed by Raman spectroscopy confirmed the decrease in amount of remaining impurities. TGA-DTA results showed that the graphite impurities first started to dissolve at $770.91^{\circ}C$ after PI process. However, the pyrolysis started at $892.18^{\circ}C$ after P I+P II process because of the dissolution of pure diamonds. This result proved the effective dissolution of the metastable phase of graphite. We expect that the proposed P II process may enhance the quality of diamonds through effective removal of surface impurities.

• Korean Journal of Microbiology
• /
• v.9 no.3
• /
• pp.103-120
• /
• 1971

We have been studied on brewing sweet starch. We obtained the results as follows ; 1) 5 strains, T-T-2, T-T-4, T-K-2, T-T-18, T-T-1, were the most available in view of fermentative power by capacity of $CO_2$. 2) 5 strains, T-T-4, T-T-2, T-T-1, T-T-3, T-K-2, produced capacity of alcohol more than 5.78%. 3) 6 strains, T-T-2, T-K-2, T-T-4, T-S-2, T-I-3, T-I-1, are available not only taste and flavour, but productive power of alcohol in sweet potato starch. 4) The form of 6 strains are long oval and round and most of them are similar to the other yeast in size. 5) In giant colony the color was cream color and cream buff, and T-K-2 was formed by $15{\times}12mm$ on diameter and by 3.5mm on high. 6) Optimum temperature of most of all strains is 25~ $300^{\circ}C$but T-K-4 is 28-30.deg.C. 7) Optimum pH is 3.4-4.6. 8) T-S-2 was died off at 65.deg.C, the other strains died $60^{\circ}C$. 9( Making Bun-kok with non-heated wheat bran .alpha.-amylase was more increased by 4.5-13.5 mg of glucose in reaction solution and .betha.-amylase more 1.6-3.4ml of N/10-$KMnO_4$ Solution than Bun-kok with heated wheat bran. 10) It seems that mycellium grows better than original in substance containing 0.4 ~ 1.2% of HCl. 11) Making Bun-kok to add 0.8% HCl, .alpha.-amylase was increased 9.93-20.7mg of glucose and .betha.-amylase ws increased 2.6~4.3ml of N/10-$KMnO_4$ solution to reaction solution. 12) 1.2%-HCl, or higher concentration, acts as inhibitor, in the meanwhile the concentration between 0.4~0.8% of HCl acts as activator. 13) We must make Bun-kok for 42 hours, at 28~$30^{\circ}C$) After we made Bun-kok using S-O-II and R-J-I one by one, Bun-kok which mix each other in equal quantity is increased more than original on enzyme acrivity. 15) Oxidation is the best way of refining sweet potato starch in N/10-phosphate buffer solution (pH 7.5). 16) When we prepared sweet potato starch, first pH was 3.0.

• Applied Biological Chemistry
• /
• v.51 no.3
• /
• pp.153-158
• /
• 2008

An actinomycetes F-97 producing tyrosinase inhibitor was isolated from soil samples. Isolation and purification of tyrosinase inhibitor produced by F-97 was performed as follows: IRC-120 ($NH_4^+$ type) column chromatography, silica gel column chromatography, $C_{18}$ column chromatography and Sephadex LH-20 column chromatography were used successively after the centrifuged supernatant was adjusted to pH 4.0. To identify the purity of the inhibitor, octadecylsilyl(ODS) HPLC was carried out with 5% methanol as a mobile phase. Finally, the purification yield of a tyrosinase inhibitor was 5.24%. The inhibitor was very soluble in water, methanol and ethanol but insoluble in acetone, butanol, ethylacetate and chloroform. The ${\lambda}_{max}$ value of this inhibitor in water was 194nm under UV light. The biochemical test of the inhibitor was positive in Molish, Benedict, cone. $H_2SO_4$, and $KMnO_4$ tests but negative in iodine, ninhydrin, Million, Sakaguchi, xanthoproteic and Emerson tests. The tyrosinase inhibitor was stable against heat treatment of $100^{\circ}C$ for 50 minutes and pH $4{\sim}9$. The $IC_{50}$ value of this inhibitor was $19.2{\mu}g/ml$ for mushroom tyrosinase. In $1,000{\mu}g/ml$ inhibitor concentration, inhibition zone was 27 mm for Streptomyces bikiniensis NRRL B-1049. The inhibition of F-97 against mushroom tyrosinase was competitive with tyrosine.

• Analytical Science and Technology
• /
• v.16 no.5
• /
• pp.399-406
• /
• 2003

This study was conducted to find out the analysis condition of selenium(Se) in oil refinery wastewater with a high concentration of Se using the atomic absorption spectrometry with hydride generation system (HG-AAS). From various experiments that reduced Se(VI) to Se(IV), the optimum pretreatment condition was determined to be a sample volume of 10 mL, HCl 10 mL, with a 30 min heating time in a water bath. In oil refinery wastewater, as the concentration of organics and constitution became higher, the recovery rates of Se decreased. Therefore, three acid digestion methods ($HNO_3/HClO_4$ digestion, $KMnO_4$ digestion, and microwave acid digestion) were tested on the recovery rates of Se in reference to the digestion of organics, petroleum and oxidation from organic Se(org.), Se(IV) to Se(VI). The experiment results showed that the average recovery rate of Se was the highest in microwave acid digestion, although all of the digestions were more than 90%. In consequence, the pretreatment procedure of microwave digestion followed by HCl addition was the most suitable for selenium analysis in oil refinery wastewater by using HG-AAS.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.606-609
• /
• 2000

We describe the preparation of a manganese oxide polymorph in which the solid-pore architecture of the material is controllably varied. All MnO$_2$ gels derived from a KMnO$\_$4/-based sol-gel synthesis. The mesoporous structure of the initial gel is maintained by removingore fluid under conditions where the capillary forces that result fro extraction are either low or no existent. are either low or noexistent. Controlling both the pore and solid architecture on the nanoscale offers a strategy for the design of supercapacitor.