• 한국의류학회지
• /
• 제20권6호
• /
• pp.1116-1124
• /
• 1996

The factors to presume the shapes of bending and draping were examined in this study, by applying the similar phenomenon and theory of analysis. The findings were as followings: 1. The value of deflection angle (f) of deflection curve were almost consistent with those of K number and the shapes of deflection curve were congruent, under the condition of that the values of EI/w are almost similar and the lengths of samples are consistent. 2. The values of drape area, drape coefficient, mean of deflection angle, and $\pi$ number were consistently estimated and the shapes of drape were almost the same, under the condition of that the values of EI/w are similar and the diameter of samples are consistent. 3. In using the samples with different values of EI/w, scale factor, kl, was obtained from the formula, the shapes of bending of the referent samples and compsactive smaples was geometrically similar, which the lengths of samples were 1,1'and were satisfied with the formula, hi: L'11, and their $\pi$ number were also consistent. 4. In applying the samples with different values of Rllw, scale factor (kl) was obtained and then, when semidiameter of samples was adjusted to be satisfied with the formula, k1=L/L, the shapes of draping of referent samples and comparative samples were geometrically similar. Furthermore, their $\pi$ number was also consistent. 5. The shares of bending and draping could be changed in terms of three factors such as the lengths of samples, bending ridigity, and weigths per unit area. $\pi$ number was obtained from theory of similar phenomenon, which was index to presume shapes of bending and the shapes of draping getting from the three factors.

• 한국잠사곤충학회지
• /
• 제27권2호
• /
• pp.40-46
• /
• 1985

구핵부가형 반응성 염료인 C.I. Reactivo Blue 19와 산성 염료인 C.I. Acid Blue 138로 각각 견을 평형염착시켜 온도 및 pH에 따른 염착량 및 고착량을 구하여 각 조건에서의 염착거동을 비교 검토하였다. 1) 염착은 pH 및 온도가 낮을수록 양염료 모두 증가하였고, 반응성 염료인 경우, pH 8.5, 7$0^{\circ}C$에서 최대 고착량을 나타내었다. 2) 산성인 경우 반응성 염료는 산성 염료와 같은 거동을 나타내었다. 3) 산성 및 반응성 염료인 KL은 pH의 감소에 따라 증가하였고, Kp는 전자인 경우 증가, 후자인 경우 감소하였다. 4) 온도가 상승할수록 양염료 모두 KL은 감소하였고, 표준친화력은 증가하였다. 5) 산성 및 반응성 염료의 염착반응은 발열반응이고 표준엔트로피는 정의 값을 나타내었다. 6) 강산성측에서는 산성 반응성 염료 모두 Langmuir형 미착과 Nernst형 미착의 합으로 나타낼 수 있다.

• 국제지역연구
• /
• 제22권4호
• /
• pp.19-35
• /
• 2018

본 논문은 분석기간 1975:1-2016:4에 걸쳐 한국의 제조업과 서비스업을 대상으로 확률변경 함수로서 초월대수(Translog) 생산함수를 이용하여 총요소생산성을 추정하였다. 또한 추정된 총요소생산성에 영향을 미치는 결정요소로서 산업의 구조와 특성을 반영하는 마크업, 자본탄력도 그리고 수입중간재비중을 포함하는 자기회귀시차모형을 설정하여 총요소생산성의 결정 요소탄력도를 추정하였다. 총요소생산성 증가율은 분석기간 평균값이 제조업은 0.0199 그리고 서비스업은 0.0063으로 추정되었다. 총요소생산성의 마크업탄력도는 제조업은 2.481로 양(+)의 값을 나타낸 반면 서비스업은 -1.403으로 음(-)의 수치를 보이고 있다. 자본집약도 탄력도는 제조업은 0.651 그리고 서비스업은 0.042로 추정되었다. 이러한 실증결과는 산업구조와 특성을 반영하는 마크업과 자본집약도가 제조업과 서비스업의 총요소생산성에 영향을 미치는 중요한 결정변수임을 밝히고 있다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권3호
• /
• pp.1149-1154
• /
• 2014

Background: In Malaysia, data from the Malaysian Health Ministry showed colorectal cancer (CRC) to be the second most common type of cancer in 2007-2009, after breast cancer. The same was apparent after looking at males and females cases separately. In the present study, the Geographic Information System (GIS) was employed to describe the distribution of CRC cases in Kuala Lumpur (KL), Malaysia, according to socio-demographic factors (age, gender, ethnicity and district). Materials and Methods: This retrospective review concerned data for patients diagnosed with colorectal cancer in the years 1995 to 2011 collected from the Wilayah Persekutuan Health Office, taken from the cancer notification form (NCR-2), and patient medical records from the Surgical Department, Universiti Kebangsaan Malaysia Medical Centre (UKMMC). A total of 146 cases were analyzed. All the data collected were analysed using ArcGIS version 10.0 and SPSS version 19.0. Results: Patients aged 60 to 69 years accounted for the highest proportion of cases (34.2%) and males slightly predominated 76 (52.1%), Chinese had the highest number of registered cases at 108 (74.0%) and staging revealed most cases in the 3rd and 4th stages. Kernel density analysis showed more cases are concentrated up in the northern area of Petaling and Kuala Lumpur subdistricts. Spatial global pattern analysis by average nearest neighbour resulted in nearest neighbour ratio of 0.75, with Z-score of -5.59, p value of <0.01 and the z-score of -5.59. Spatial autocorrelation (Moran's I) showed clustering significant with p<0.01, Z score 3.14 and Moran's Index of 0.007. When mapping clusters with hotspot analysis (Getis-Ord Gi), hot and cold spots were identified. Hot spot areas fell on the northeast side of KL. Conclusions: This study demonstrated significant spatial patterns of cancer incidence in KL. Knowledge about these spatial patterns can provide useful information to policymakers in the planning of screening of CRC in the targeted population and improvement of healthcare facilities to provide better treatment for CRC patients.

• 대한안전경영과학회지
• /
• 제10권3호
• /
• pp.227-235
• /
• 2008

Recently, as change in global logistics environment, various issues have been presenting. These issues are including the pursuit of low cost-high added value, the realization of sustainable logistics system, the protection of environment, and the development of ubiquitous techniques. To cope with these environment changes and improve the national logistics system, the government have carried out various logistics policies and pushed ahead development of national logistics information network. But still, from a view-point of national logistics, there are several inefficient elements such as information connection and utilization, code/data standardization. In this paper, the survey result of global logistics environment change, logistics policy of a developed countries, domestic logistics policy and information system status will be presented. And from these status, suggestive points are mentioned. Finally the status of railway logistics information and future developments are presented.

• 한국분무공학회지
• /
• 제7권3호
• /
• pp.31-37
• /
• 2002

In previous study, diesel-methanol stratified injection system is manufactured and applied to a D.I. diesel engine in order to realize combustion improvement using methanol, which is oxygenated fuel with large latent heat. We know that NOx and soot is reduced by stratified injection of diesel fuel-methanol. Therefore, in the present study, combustion diagnosis using optical measurement is tried to make clear effect of methanol on simultaneous reduction of NOx and soot. Two-color method is used to measure flame temperature and KL value, which is approximately proportional to the soot consentration along the optical path. Laser induced scattering method was used to measure distribution of soot at two dimensional area. Also, it is compared exhaust characteristics of NOx and soot with results of optical measurement.

• 한국농공학회지
• /
• 제16권3호
• /
• pp.3477-3491
• /
• 1974

Following are the results of the study on the property of falling permeation of stratified soil in the close state under existence of stagnant water on a soil layer. 1. When on the stratified soil a least permeating layer was put on the soil layer the load Pressure was present owing to appearance of saturation close state driving decrease of the pressure in the lower layer, on the other hand when the least permeating layer was placed under the layer the lower least permeating layer pressure was decreased. 2. In the case of least permeating layer the variation of current gradient according to the respective level after treating the layer was enormous and due to usal storage phenomena for the Kl layer which was coarse that was trifle. 3. The permeability of the respective layer of stratified soil in the close state died not always coincide with that of single layer. 4. Generally Zunker's equation of average permeability was valid but actually calculated permeating velocity after treating the layer of stratified soil was seriously differ from the measured value owing to the variation of current gradient, especially when the pressure head at the layer boundany was discontinuous the validity of the equation of average permeability was seemed to be doubtful. 5. The permeating velocity of stratified soil was regulated by the least permeating layer, i.e. it is thought to be rational to estimate the value by calculating the current gradient with its proper permeability, pressure headon the layer and its thickness.

• 천문학회지
• /
• 제24권2호
• /
• pp.217-271
• /
• 1991

We have observed dense core around young stellar objects, DR21, S140, Orion-KL, and L1551 using four millimeter-wave transitions of $HC_3N\;J$=4-3, J=5-4, J=10-9, and J=12-11. The spatial distribution of $HC_3N$ emission closely resembles the morphology of the previous CS observations that trace high density gas. These observations reveal the existence of $HC_3N$ dense cores around central IR source, elliptical in shape and almost perpendicular to the CO bipolar outflow axis. Small differences can be explained by that $HC_3N$ molecular line is more optically thin and is seen to be more detailed structure in the neighborhood of central IR sources. In S140 and Orion-KL, massive(${\sim}10\;M_{\odot}$), slowly rotating dense cores lie near at the central IR sources of bipolar outflows. The velocity channel maps of DR21 show that the bipolar outflow gas may have a correlation with the dense core of DR21. We analyzed intensities of the four lines to derive physical conditions in dense core from two methods, LTE and LVG. The column density of $HC_3N$, $N(HC_3N)$, between LTE and LVG calculations agree well with each other. The abundances of $HC_3N$ in each observing source have been estimated using the average values of $n(H_2)$ and $N(HC_3N)$ and assuming the size of dense core. The fractional $HC_3N$ abundances in massive dense cores of DR21, S140, and Orion-KL have a range of $(2-7){\times}10^{-10}$, while that of low mass dense core, L1551, has one order of magnitude greater value of $2{\times}10^{-9}$. This should be considered good agreement with the result by Morris et al.(1976). It may be considered that dense cores of DR21, S140, and Orion-KL may have almost same stage of chemical evolution, and their abundances have a small values relative to that of L1551. The column density $N(HC_3N)$ decreases with increasing distance from the densest part of the cloud, the central infrared source, and have the relation of $N(HC_3N){\varpropto}R^{\alpha}$, where a has a range of 0.65 to 0.89. The values of $n(H_2)$ are not varied with increasing distance from the dense core, and have almost same values. Therefore, it is considered that the dense cores in these regions probably consist of dense clumps in diffuse molecular gas medium, and $n(H_2)$ of each clump is ${\sim}10^5\;cm^{-3}$. Levels in the $T_{ex}$ increases with $n(H_2)$. It is considered that the $HC_3N$ dense cores are not completely thermalized. We examine the relationships between the luminosity of central infrared sources versus mass of the dense cores, and the luminosity of central infrared sources versus molecular hydrogen column density. Luminosities of the central IR sources show good correlation with mass and hydrogen column density of the dense core. Same has been found from CS observations. However, mass and size derived from $HC_3N$ observations are one order of magnitude smaller than those from CS. It can be interpreted that we see more central part of the cloud cores in $NC_3N$ lines than CS lines.

• 음성과학
• /
• 제15권2호
• /
• pp.55-65
• /
• 2008

Recently, the multi-model based speech recognizer has been used quite successfully for noisy speech recognition. For the selection of the reference HMM (hidden Markov model) which best matches the noise type and SNR (signal to noise ratio) of the input testing speech, the estimation of the SNR value using the VAD (voice activity detection) algorithm and the classification of the noise type based on the GMM (Gaussian mixture model) have been done separately in the multi-model framework. As the SNR estimation process is vulnerable to errors, we propose an efficient method which can classify simultaneously the SNR values and noise types. The KL (Kullback-Leibler) distance between the single Gaussian distributions for the noise signal during the training and testing is utilized for the classification. The recognition experiments have been done on the Aurora 2 database showing the usefulness of the model compensation method in the multi-model based speech recognizer. We could also see that further performance improvement was achievable by combining the probability density function of the MCT (multi-condition training) with that of the reference HMM compensated by the D-JA (data-driven Jacobian adaptation) in the multi-model based speech recognizer.

• 동력기계공학회지
• /
• 제16권4호
• /
• pp.5-11
• /
• 2012

There were some papers for diesel engine performance tests using BDF, but few article deals with the temperature and soot concentration of Bio diesel flame. Since the flame temperature of diesel engines is so high and change rapidly, an optical method for measurement of flame temperature is known as the most effective one. The two-color method regarding the visible wavelength radiation for the soot particles in flame was applied on Bio diesel flame in order to measure flame temperature and soot concentration in a diesel engine. Photo detecting device was newly designed and employed TSL250R, photo-diode, to pick-up the light information emitted from the combustion flame. As a result, real flame temperature T, as a flame brightness temperature, through Ta1, Ta2, were obtained and finally the characteristics of KL value as a soot concentration reveal the difference of combustion information between diesel fuel, blending oil and Bio diesel fuel oil.