• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.594-595
• /
• 2007

RFID(Radio Frequency IDentification)는 사물에 ID태그를 부착하여 정보를 제공하는 것을 기능으로 하여 점차적으로 센싱 기능을 추가하여 발전하고 있다. 본 연구에서는 배전 공가설비인 통신케이블을 관리하기 위하여 RFID를 이용하여 감시 및 순시 정보를 기록, 관리하며 봉인을 위한 지그비 센서태그를 이용하여 무단으로 설치되는 통신케이블을 실시간으로 감시할 수 있는 공가관리시스템을 구현하였다. 570만 전주에 달하는 공가설비를 관리하는 것은 안정적인 전력 공급을 위하여서도 필요하며 공가설비 관리의 IT화를 도모하여 RFID 비즈니스 모델로 활용할 수 있을 것으로 기대된다. 본 연구에서는 이를 위해 전주나 통신케이블에 전자태그를 부착하여 RFID 미들웨어를 통해 데이터를 수집하고 정보시스템에 접속하여 실시간으로 공가시설물 정보를 취득할 수 있는 정보시스템을 구축함으로써 무단 공가설비 설치 감시 및 공가설비 순회 점검 결과를 관리할 수 있도록 데이터베이스에 반영하여 현장의 공가설비내역과 정보시스템의 데이터베이스를 동기화시켜 실시간으로 현황을 파악할 수 있도록 개발하였다.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.4
• /
• pp.832-839
• /
• 2013

This paper describes the simulation and experiment for partial discharge (PD) pulse propagation in 22.9kV CNCV power cables. To investigate the propagation characteristics of PD, experiments are carried out by injecting the PD pulse in 100m-long 60 $mm^2$ CNCV cable in the laboratory. The characteristics of PD are also simulated using EMTP to investigate and analyze PD in the same cable. By comparing the simulation and test results, parameter permittivity is recalculated by considering semiconducting screen in the process of simulation and analysis of PD. After it is proved that simulation results and test results are almost similar in the laboratory, extensive simulations are performed to analyse various PD characteristics such as propagation velocity, attenuation, etc. in 60 $mm^2$ and 325 $mm^2$ CNCV cables. Authors are confident that results obtained in this paper will be used as important technical materials to detect and investigate PD generated in transmission and distribution power cables.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.344-345
• /
• 2006

In this study, in order to develop low temperature sintering piezoelectric transformer, $(Pb_{0.99-x}Ca_xSr_{0.01})Ti_{0.96}(Mn_{1/3}Sb_{2/3})_{0.04}O_3$ ceramic systems were fabricated using $Na_2CO_3-Li_2CO_3$ as sintering aids and investigated with the amount of Ca substitution. The piezoelectric transformer requires high electromechanical coupling factor $k_t$ and high mechanical quality factor $Q_{mt}$ for generating high output power At the ($PbCaSr)Ti(MnSb)O_3$ ceramics with 24mol% Ca substitution sintered at $900^{\circ}C$, electromechanical coupling factor $k_t$ and mechanical quality factor $Q_{mt}$ showed the optimal values of 0.504 and 1655 respectively, for thickness vibration mode multilayer piezoelectric transformer application.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1131-1134
• /
• 2003

이 논문은 현재 국내에서 사용하고 있는 배전용 케이블 열화진단장치인 완화전류 측정장치의 진단기준 개선을 위한 것이다. 현재까지 사용되던 직류 고전압을 이용한 누설전류 측정법을 대체하기 위해 사용되는 완화전류 측정장치는 국내 배전선로에서 수년간 현장적용을 실시하여 많은 케이블을 교체하였다. 하지만 완화전류 측정을 통해 교체한 케이블의 상태에 대해서는 검증되지 않은 상태이므로 완화전류 측정을 통한 교체기준이 국내 케이블에 적절한지 확인할 필요가 있다. 이는 케이블 유지보수에 있어서 중요한 사항으로서 교체기준이 부적절할 경우 열화진단을 통한 고장방지 목적을 달성할 수 없거나 건전한 케이블을 교체하여 불필요한 예산을 낭비하는 원인이 된다. 본 논문에서는 현장운전중인 선로를 선택하고 열화된 케이블의 절연성능 향상을 위해 실리콘을 주입하였다. 그리고 실리콘 처리후 케이블의 운전시간에 따른 열화진단 결과와 케이블 절연파괴강도를 비교하여 진단장치의 신뢰성을 검증하고자 하였다. 이것은 1년 동안의 현장시험 결과를 정리한 것이다.

• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2371-2376
• /
• 2021

As the γ-ray energy increases, a reconstructed image becomes noisy and blurred due to the penetration of the γ-ray through the coded mask. Therefore, the thickness of the coded mask was increased for high energy regions, resulting in severely decreased the performance of the detection efficiency due to self-collimation by the mask. In order to overcome the limitation, a modified uniformly redundant array γ-ray imaging system using dual anti-mask method was developed, and its performance was compared and evaluated in high-energy radiation region. In the dual anti-mask method, the two shadow images, including the subtraction of background events, can simultaneously contribute to the reconstructed image. Moreover, the reconstructed images using each shadow image were integrated using a hybrid update maximum likelihood expectation maximization (h-MLEM). Using the quantitative evaluation method, the performance of the dual anti-mask method was compared with the previously developed collimation methods. As the shadow image which was subtracted the background events leads to a higher-quality reconstructed image, the reconstructed image of the dual anti-mask method showed high performance among the three collimation methods. Finally, the quantitative evaluation method proves that the performance of the dual anti-mask method was better than that of the previously reconstruction methods.

• Transactions of the Korean hydrogen and new energy society
• /
• v.30 no.4
• /
• pp.330-337
• /
• 2019

Effects of cyclone and freeboard geometry on solid entrainment loss were investigated with two different types of cyclones and bubbling beds in a gas-solid fluidized bed system. The solid entrainment loss was measured by collected fines during continuous solid circulation condition. Bubbling bed which has an expanded freeboard showed less solid entrainment than the bubbling bed which has a straight freeboard. The cyclone which has a wide gas-solid mixture inlet showed less solid entrainment loss than the cyclone which has a narrow gas-solid mixture inlet. Moreover, the cyclone has a wide gas-solid mixture inlet can capture smaller particles.

• Progress in Superconductivity and Cryogenics
• /
• v.12 no.3
• /
• pp.34-38
• /
• 2010

Until now some countries including South Korea have made big progress and many efforts in the development of high temperature superconductor (HTS) power equipments. Especially, HTS Cable and superconducting fault current limiter (SFCL) are the strongest candidates among them from the viewpoint of applying to real grid. In South Korea, HTS cable and SFCL have been installed in test fields and tested successfully at Gochang PT Center of KEPCO. In order to meet practical requirements and be feasible in real grid, a demonstration project for HTS cable and SFCL systems, called GENI(green superconducting electric power network at Icheon substation) project, has been initiated to install 23kV HTS cable and SFCL systems in a utility network in South Korea since 2008. Namely, it says the first demonstration project for the application HTS system to real smart grid in South Korea. This paper presents the design and the application plan of the 22.9kV HTS cable and SFCL in 154kV Icheon substation in South Korea with the viewpoint of applying in Smat Grid.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.375-381
• /
• 2022

Safety accidents are of concern during construction projects, even given the recent innovations in digital technologies. These projects remain focused on overcoming specific and limited applications on construction sites. For this reason, the development of an inclusive safety management system has become crucial. This study aims to build a Big Data platform to inform decisions on how to proactively eliminate worker hazards on construction sites. The platform consists of about 100,000 real records and a real-time monitored database featuring various safety indices, such as workers' altitudes, heart rates, and fatigability during construction, which are determined through various wearable devices. The data types are customized and integrated by a research team in accordance with the characteristics of a specific project using hypertext transfer protocol (HTTP). The results can be helpful as efficient tools to ensure successful safety management in complex construction situations. This study is expected to provide three significant contributions to the field, including real-time fatigability analysis and tracking of workers on-site; providing early GPS-based warnings to workers who might be accessing dangerous spaces or places; and monitoring the workers' health indices, based on details from 100,000 cases.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.1038-1040
• /
• 2022

지속적인 지구 평균 기온 상승으로 인해 우리나라를 포함한 전 세계적으로 탄소중립을 위한 혁신이 이루어지고 있다. 본 연구는 해양수산부 '해양수산분야 2050 탄소중립 로드맵'의 기준에 따라 에너지 자립률을 극대화하고 효율을 최적화시킨 제로에너지 탄소중립 건축물을 제시한다. 태양광 발전 시스템에서, 패널의 태양 일주추적 기능을 통해 에너지 발전률을 극대화하고, 패널 하향정렬 및 딥러닝 모델을 통해 유지 보수를 용이하게 하여 성능 저하를 예방한다. 폐열을 이용한 열 회수/바이패스 환기 시스템을 통해 에너지 효율을 최적화하고, 온/습도에 가중치를 부여하여 모호했던 환기 시스템 결정 기준을 에너지 효율화에 맞게 최적화해 제시한다. 탄소중립 BEMS 기능이 내재된 앱 개발로 위의 건축물 시스템을 제어·관리한다. 본 연구를 통해 제로 에너지 건축물으로서 항만 건물의 가능성을 제고하고, 탄소중립 항만의 구현을 기대한다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.6
• /
• pp.523-529
• /
• 2020

Power distribution management system is essential for the efficient management and operation of power distribution networks. The power distribution system is a system that manages the distribution network based on IT, and has been evolving along with the development of the power industry. The current power distribution system is designed to operate at a relatively low network transmission speed based on the independent operation of the main equipment. However, due to distributed resources such as photovoltaic or energy storage devices, which are rapidly increasing in popularity in recent years, the operation of future distribution environments is becoming more complex, and various information needs to be collected in real time. In this study, the requirements of the next-generation power distribution system were derived to overcome the limitations of the existing power distribution system, and based on this, the communication network system and performance requirements for the distribution system were defined. In order to verify the performance of the designed system, a software-based terminal device simulator was developed because it takes excessive time and cost to introduce a large-scale system such as a power distribution system. Using the simulator, a test environment similar to the actual operation was established, and the number of terminal devices was increased up to 1,000. The proposed system was shown to satisfy the requirements to support the functions of the next-generation power distribution system, recording less than 10 % of the communication network bandwidth.