• The Korean Journal of Physiology
• /
• v.17 no.2
• /
• pp.161-168
• /
• 1983

Studies on the effects of vanadate for Na-K-ATPase activity were carried out with rabbit renal cortex. 1) Na-K-ATPase activity was inhibited with the concentrations of vanadate in incubation medium. The vanadate concentration at which activity was inhibited by 50%$(ID_{50})$ was $10^{-6}M$ and Hill coefficient was 1.00. 2) The fractional inhibition by constant concentration of vanadate decreased with increasing enzyme concentration. 3) Increasing $K^+$ and $Na^+$ concentrations in incubation medium diminished the ability to inhibit Na-K-ATPase by vanadate whereas increasing $K^+$ and $Mg^{2+}$ concentrations potentiated the inhibition of Na-K-ATPase by vanadate. 4) Vanadate didn't inhibit Na-K-ATPase at pH 6.6. Increasing pH potentiated the inhibition of Na-K-ATPase activity. 5) Vanadate inhibited Na-K-ATPase activity reversibly in all range of concentrations in dilution experiment. These results show that vanadate inhibits Na-K-ATPase activity with interacting at $KE_2$ state reversibly.

• Annual Conference on Human and Language Technology
• /
• 2022.10a
• /
• pp.251-256
• /
• 2022

범주 불균형은 분류 모델이 다수 범주에 편향되게 학습되어 소수 범주에 대한 분류 성능을 떨어뜨리는 문제를 야기한다. 언더 샘플링 기법은 다수 범주 데이터의 수를 줄여 소수 범주와 균형을 이루게하는 대표적인 불균형 해결 방법으로, 텍스트 도메인에서의 기존 언더 샘플링 연구에서는 단어 임베딩과 랜덤 샘플링과 같은 비교적 간단한 기법만이 적용되었다. 본 논문에서는 트랜스포머 기반 문장 임베딩과 군집화 기반 샘플링 방법을 통해 텍스트 데이터의 정보 손실을 최소화하는 언더샘플링 방법을 제안한다. 제안 방법의 검증을 위해, 감성 분석 실험에서 제안 방법과 랜덤 샘플링으로 추출한 훈련 세트로 모델을 학습하고 성능을 비교 평가하였다. 제안 방법을 활용한 모델이 랜덤 샘플링을 활용한 모델에 비해 적게는 0.2%, 많게는 2.0% 높은 분류 정확도를 보였고, 이를 통해 제안하는 군집화 기반 언더 샘플링 기법의 효과를 확인하였다.

• Journal of the Korean Vacuum Society
• /
• v.6 no.S1
• /
• pp.122-126
• /
• 1997

the Cu/polyimide system is known to be the best candidate for a multilevel interconnection system due to the low resistance of Cu and to the low dielectric constant of polyimide respectively. Ion beam mixing of Cu(40nm)/polyimide was carried out at room temperature with 80 keV Ar+ and N2+ form $1.5\times$1015 to 15$\times$1015 ions/cm2. The quantitative adhesion strength was measured by a standard scratch test. X-ray photoelectron spectroscopy and x-ray emission spectrocopy are employed to investigate the chemical bonds and the interlayer compound formation of the films Cu/Al/polyimide showed more adhesion strength than Cu/polyimide after ion beam mixing and N2+ ions are more effective in the adhesion enhancement than Ar+ with the same sample geometry. The XES results shows the formation of interlayer compound of CuAl2O4 which can reflect more adhesive Cu/Al/polyimide which has not been reported previously. The latter results is understood by the fact that N2+ ions produce more pyridinelike moiety, amide group and tertiary amine moiety whcih are known as adhesion promotors.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.17 no.2
• /
• pp.53-58
• /
• 2013

Purpose: To optimize correction method for SPECT/CT, image quality consisting of resolution and contrast was evaluated using three radioisotopes ($^{99m}Tc$, $^{201}Tl$ and $^{131}I$) and three different correction methods; attenuation correction (AC), scatter correction (SC) and both attenuation and scatter correction (ACSC). Materials and Methods: Images were acquired with a SPECT/CT scanner and a conventional CT protocol with an OESM reconstruction algorithm (2 iterations and 10 subsets). For resolution measurement, fixed radioactivity (2.22 kBq) was infused into a spatial resolution phantom and full width at half maximum (FWHM) was measured using a vendor-provided software. For contrast evaluation, radioactive source with a ratio of 1:8 to background was filled in a Flanged Jaszczak phantom and percent contrast (%) were calculated. All the parameters for image quality were compared with non-correction (NC) method. Results: As compared with NC, image resolution of all three isotopes were significantly improved by AC and ACSC, not by SC. In particular, ACSC showed better resolution than AC alone for $^{99m}Tc$ and $^{201}Tl$. Image contrast of all three radioisotopes in a sphere with the largest diameter were enhanced by all correction methods. ACSC showed the highest contrast in all three radioisotopes, which was the most accurate in $^{99m}Tc$ (85.9%). Conclusion: Image quality of SPECT/CT was improved in all the radioisotopes by CT-based attenuation correction methods, except SC alone. SC failed to improve resolution in any radioisotopes, but it was effective in contrast enhancement. ACSC would be the best correction method as it improved resolution in radioisotopes with low energy levels and contrast in radioisotope with low energy levels. However, in radioisotope with high energy level, AC would be better than ACSC for resolution improvement.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.3
• /
• pp.1187-1191
• /
• 2016

Background: The prevalence of prostate cancer (PCa) has been increasing in recent years. Treatment strategies are largely based on the results of bone scan screening. Therefore, our aim was to investigate predictors of positive bone metastasis in newly diagnosed PCa patients. Materials and Methods: After extensive review, 336 consecutive patients newly diagnosed with PCa between April 2010 and November 2013 at our institution were enlisted in the study. Patients were divided into two groups according to bone scan results. Univariate analyses (Chi-square test for discrete variables and independent t-test for continuous variables) were applied to determine the potentially significant risk factors associated with distant bone metastasis. Binary logistic regression analyses were used to further investigate the influence of these factors on bone metastasis. Results: The patient mean age was $71.9{\pm}8.6years$ (range: 48 to 94 years). The mean prostate specific antigen (PSA) level and biopsy Gleason score were $260.2{\pm}1107.8ng/mL$ and $7.4{\pm}1.5$, respectively. The body mass index (BMI) for the series was $24.5{\pm}3.4kg/m^2$. Sixty-four patients (19.0%) had a positive bone scan result. Patients with positive bone scan results had a significantly lower BMI ($23.3{\pm}3.5$ vs. $24.8{\pm}3.3$; p=0.003), a higher Gleason score ($8.5{\pm}1.1$ vs. $7.1{\pm}1.5$; p < 0.001), and a higher PSA level ($1071.3{\pm}2337.1$ vs. $69.4{\pm}235.5$; p < 0.001) than those without bone metastasis. Multivariate logistic regression analysis employing the above independent predictors demonstrated that a Gleason score of ${\geq}7$, clinical stage ${\geq}T3$, $BMI{\leq}22kg/m^2$, and an initial PSA level of ${\geq}20ng/mL$ were all independent predictors of bone metastasis. Conclusions: A bone scan might be necessary in newly diagnosed PCa patients with any of the following criteria: clinical stage T3 or higher, a Gleason score of 7 or higher, BMI equal to or less than 22, and a PSA level of 20 or higher.

• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.101-107
• /
• 1998

This paper is studied micro-defect characteristics by phosphorus 1MeV ion implantation and Rs, SRP, SIMS, XTEM for the RTA process was measured and simulated. As the dose is higher, the Rs is lower. When the dose are $1{\times}10^{13}/cm^2,\;5{\times}10^{13}/cm^2,\;1{\times}10^{14}/cm^2$, the Rp are $1.15{\mu}m,\;1.15{\mu},\;1.10{\mu}m$ respectively. As the RTA time is longer, the maximum concentration position is deeper from the surface and the concentration is lower. Before the RTA was done, we didn't observe any defect. But after the RTA process was done, we could observe the RTA process changed the micro-defects into the secondary defects. The simulation using the buried layer and connecting layer structure was performed. As results, the connecting layer had more effect than the buried layer to latch-up immune. Trigger current was more $0.6mA/{\mu}m$ and trigger voltage was 6V at dose $1{\times}10^{14}/cm^2$ and the energy 500KeV of connecting layer Lower connecting layer dose, latch-up immune characteristics was better.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.162-162
• /
• 1999

초고주파 집적회로의 핵심소자로 각광을 받고 있는 GaAs MESFET(MEtal-emiconductor)은 게이트 형성 공정이 가장 중요하며, WNx 내화금속을 이용한 planar 게이트 구조의 경우 임계전압(Vth:threshold voltage)의 균일도가 우수할 뿐만 아니라 특히 Side-wall을 이용한 self-align 게이트는 소오스 저항을 줄일 수 있어 고성능의 소자 제작을 가능하게 한다.(1) 본 연구의 핵심이 되는 Side-wall을 형성하기 위하여 PECVD법에 의한 SiOx 박막을 증착하고, 건식식각법을 이용하여 SiOx side-wall을 형성하였다. 이 공정을 이용하여 소오스 저항이 낮고 임계전압의 균일도가 우수한 고성능의 self-aligned gate MESFET을 제작하였다. 3inch GaAs 기판상에 이온주입법에 의한 채널 형성, d.c. 스퍼터링법에 의한 WNx 증착, PECVD법에 의한 SiOx 증착, MERIE(Magnetic Enhanced Reactive Ion Etcing)에 의한 Side-wall 형성, LDD(Lightly Doped Drain)와 N+ 이온주입, 그리고 RTA(Rapid Thermal Annealing)를 사용하여 활성화 공정을 수행하였다. 채널은 40keV, 4312/cm2로, LDD는 50keV, 8e12/cm2로 이온주입하였고, 4000A의 SiOx를 증착한 후 2500A의 Side-wall을 형성하였다. 옴익 접촉은 AuGe/Ni/Au 합금을 이용하였고, 소자의 최종 Passivation은 SiNx 박막을 이용하였다. 제작된 소자의 전기적 특성은 hp4145B parameter analyzer를 이용한 전압-전류 측정을 통하여 평가하였다. Side-wall 형성은 0.3$\mu\textrm{m}$ 이상의 패턴크기에서 수직으로 잘 형성되었고, 본 연궁에서는 게이트 길이가 0.5$\mu\textrm{m}$인 MESFET을 제작하였다. d.c. 특성 측정 결과 Vds=2.0V에서 임계전압은 -0.78V, 트랜스컨덕턴스는 354mS/mm, 그리고 포화전류는 171mA/mm로 평가되었다. 특히 본 연구에서 개발된 트랜지스터의 게이트 전압 변화에 따른 균일한 트랜스 컨덕턴스의 특성은 RF 소자로 사용할 때 마이크로 웨이브의 왜곡특성을 없애주기 때문에 균일한 신호의 전달을 가능하게 한다. 0.5$\mu\textrm{m}$$\times$100$\mu\textrm{m}$ 게이트 MESFET을 이용한 S-parameter 측정과 Curve fitting 으로부터 차단주파수 fT는 40GHz 이상으로 평가되었고, 특히 균일한 트랜스컨덕턴스의 경향과 함께 차단주파수 역시 게이트 바이어스, 즉 소오스-드레스인 전류의 변화에 따라 균일한 값을 보였다. 본 연구에서 개발된 Side-wall 공정은 게이트 길이가 0.3$\mu\textrm{m}$까지 작은 경우에도 사용가능하며, WNx self-align gate MEESFET은 낮은 소오스저항, 균일한 임계전압 특성, 그리고 높고 균일한 트랜스 컨덕턴스 특성으로 HHP(Hend-Held Phone) 및 PCS(Personal communication System)와 같은 이동 통신용 단말기의 MMICs(Monolithic Microwave Integrates Circuits)의 제작에 활용될 것으로 기대된다.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.5
• /
• pp.713-722
• /
• 2011

The aim of this study was to confirm Pseudomonas spp. as the specific spoilage organism (SSO) of chilled beef during aerobic storage and to establish a model to predict the shelf life of beef. Naturally contaminated beef was stored at $4^{\circ}C$, and the spoilage limit of Pseudomonas organisms was determined by measuring several quality indicators during storage, including the number of Pseudomonas organisms, total number of bacteria, total volatile basic nitrogen (TVBN) values, L value color scale scores and sensory evaluation scores. The beef was then stored at 0, 4, 7, 10, 15 or $20^{\circ}C$ for varying amounts of time, and the number of Pseudomonas organisms were counted, allowing a corresponding growth model to be established. The results showed that the presence of Pseudomonas spp. was significantly correlated to each quality characteristic (p<0.01), demonstrating that Pseudomonas spp. are the SSO of chilled beef and that the spoilage limit was $10^{8.20}$ cfu/g. The Baranyi and Roberts equation can predict the growth of Pseudomonas spp. in beef, and the $R^2$ value of each model was greater than 0.95. The square root model was used as follows, and the absolute values of the residuals were less than ${0.05:\;{\mu_{max}}^{1/2}$ = 0.15604 [T+(-0.08472)] (p<0.01), $R^2$ = 0.98, $\lambda^{-1/2}$ = 0.0649+0.0242T (p<0.01, $R^2$ = 0.94). The model presented here describes the impact of different temperatures on the growth of Pseudomonas spp., thereby establishing a model for the prediction of the shelf life of beef stored between 0 to $20^{\circ}C$.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.10
• /
• pp.4329-4333
• /
• 2015

Background: To investigate the change of frequency and immuno-inhibitory function of myeloid-derived suppressor cells (MDSCs) after treatment of cisplatin (DDP) in A375 human melanoma model. Materials and Methods: BALB/c nude mice were inoculated with A375 cells to establish the human melanoma model and randomly divided into control group given normal saline (NS) and experimental group treated with DDP (5 mg/kg). The percentages of MDSCs in the tumor tissue and peripheral blood after DDP treatment were detected by flow cytometry. The proliferation and interferon-${\gamma}$ (IFN-${\gamma}$) secretion of T cells co-cultured with MDSCs were analyzed through carboxyfluorescein succinimidyl ester (CFSE) labeling assay and enzyme-linked immunospot (ELISPOT) assay, respectively. Results: In A375 human melanoma model, DDP treatment could significantly decrease the percentage of MDSCs in the tumor tissue, but exerted no effect on the level of MDSCs in peripheral blood. Moreover, DDP treatment could attenuate the immuno-inhibitory function of MDSCs. T cells co-cultured with DDP-treated MDSCs could dramatically elevate the proliferation and production of INF-${\gamma}$. Conclusions: DDP can decrease the frequency and attenuate immuno-inhibitory function of MDSCs in A375 melanoma model, suggesting a potential strategy to augment the efficacy of combined immunotherapy.

• Structural Engineering and Mechanics
• /
• v.52 no.3
• /
• pp.485-505
• /
• 2014

This study aimed to develop an approach to accurately predict the wind models and wind effects of large wind turbines. The wind-induced vibration characteristics of a 5 MW tower-blade coupled wind turbine system have been investigated in this paper. First, the blade-tower integration model was established, which included blades, nacelle, tower and the base of the wind turbine system. The harmonic superposition method and modified blade element momentum theory were then applied to simulate the fluctuating wind field for the rotor blades and tower. Finally, wind-induced responses and equivalent static wind loads (ESWL) of the system were studied based on the modified consistent coupling method, which took into account coupling effects of resonant modes, cross terms of resonant and background responses. Furthermore, useful suggestions were proposed to instruct the wind resistance design of large wind turbines. Based on obtained results, it is shown from the obtained results that wind-induced responses and ESWL were characterized with complicated modal responses, multi-mode coupling effects, and multiple equivalent objectives. Compared with the background component, the resonant component made more contribution to wind-induced responses and equivalent static wind loads at the middle-upper part of the tower and blades, and cross terms between background and resonant components affected the total fluctuation responses, while the background responses were similar with the resonant responses at the bottom of tower.