• Economic and Environmental Geology
• /
• v.38 no.5 s.174
• /
• pp.571-577
• /
• 2005

Permeable reactive barrier using iron oxide coated sand is one of effective technologies for As(V) contaminated groundwater. However, this method is restricted to As(III), because As(III) species tends to be more weakly bound to adsorbent. In order to overcome the limitation of iron oxide coated sand application to As(III) contaminated groundwater, manganese oxide materials as promoter of As(III) removal were combined to the conventional technology in this study. For combined use of iron oxide coated sand and manganese oxide coated sand, two kinds of removal methods, sequential removal method and simultaneous removal method, were introduced. Both methods showed similar removal efficiency over $85\%$ for 6 hrs. However, the sequential method converted the As contaminated water to acid state (pH 4.5), on the contrary, the simultaneous method maintained neutral state (pH 6.0). Therefore, simultaneous As removal method was ascertained as a suitable treatment technology of As contaminated water. Moreover, for more effective As(III) remediation technique, polypropylene textile which has the characteristics of high surface area, low specific gravity and flexibility was applied as alternative material of sand. The combined use of coated polypropylenes by simultaneous method showed much more prominent and rapid remediation efficiency over $99\%$ after 6 hrs; besides, it has practical advantages in replacement or disposal of adsorbent for simple conventional removal device.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.1
• /
• pp.47-50
• /
• 2009

Purpose: Presently, any exact standard of radiopharmaceutical doses in pediatric nuclear medicine doesn't exist in the universe. So hospitals are following by manual of vial kit or guidelines of America and Europe based on recommended adult doses adjusted for body mass (MBq/kg) or body surface area (MBq/$m^2$). However, especially for children younger than 1 year and heavier than 50 kg, it's hard to estimate exact dosage for those children. Materials and Methods: In order to obtain objective data of multipliers for pediatric studies, we surveyed 4 major hospitals in Korea. After receiving feedbacks, we changed dosage to multiplier. And we compared multipliers of Korea to America's and Europe's. Results: Most hospitals in Korea are following by body mass formula (MBq/kg). On the other hand, standards don't include proper factors for a child younger than 1 year and heavier than 50 kg. Multipliers for 3 kg children who are injected lower doses than needed are America:0.12, Europe:0.09, Korea:0.05, multipliers for 30 kg children who are injected proper doses are America:0.58, Europe:0.51, Korea:0.45 and multipliers for 60 kg children who are injected more doses than needed are America:0.95, Europe:0.95, Korea:0.91. Conclusions : Through the survey, when calculating doses for children, usually output doses are based on adult doses adjusted for body mass (MBq/kg) but research has shown that standards of all of the compared standards don't reflect exact multipliers for children younger than 1 year and heavier than 50 kg. Therefore, we should give an effort to reduce needless radiation exposure in children by establishing a proper doses standard and also developing better image reconstruction software.

• Journal of Veterinary Clinics
• /
• v.30 no.5
• /
• pp.339-345
• /
• 2013

Mitogen-activated protein kinases (MAPKs) are a family of central signaling molecules that respond to numerous stimuli and are known to participate in processes of cell survival and death. However, it is not clear on data for cell-type specific activation of MAPKs in the progression of gastric ulcer. In the present study, we assessed how MAPKs localized at various cell types during the progression of gastric ulcer induced by ibuprofen. Gastric ulcer was induced by the repeated treatment of 200 mg/kg ibuprofen with 8 hrs interval in a day. Animals were sacrificed at 24 hrs, 48 hrs, and 72 hrs after oral treatment of ibuprofen and gastric tissues were subjected to immunohistochemical and immunoblotting evaluation. Immunoreactivity of phospho-extracellular signal-regulated kinase (p-ERK) was mainly expressed at the proliferating zone of gastric mucosa in control rats. But, these signals for p-ERK were highly shifted from cells of proliferating zone to parietal cells of the basal regions 24 hrs after treatment of ibuprofen. p-ERK signal was strongly expressed in epithelial cells adjacent to ulcer margin and new capillary and infiltrated inflammatory cells within granulation tissue of the ulcer base above 48 hrs after treatment of ibuprofen. While, phospho-c-Jun $NH_2$ terminal kinase (p-JNK) was mainly localized to the nuclei of the surface epithelial cells and the glandular epithelial cells in early gastric injury. Also, p-JNK was often observed as a scattered pattern in different regions of gastric mucosa with early gastric injury. Gradually, signal of p-JNK was strongly stained in infiltrated inflammatory cells and fibroblasts within severe ulcer base. Phospho-p38 (p-p38) MAPK was observed as scattered pattern within connective tissues of gastric mucosa. Especially, p-p38 MAPK showed strong signal in infiltrated macrophages within ulcer base. These results show that each MAPK has a specific role in various cell types during the progression of gastric ulcer.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.4
• /
• pp.405-417
• /
• 2010

Previous studies have already shown that mouthguard is effective in protecting jaw bone, teeth and oral tissue against sports trauma. However, other than severe trauma, repetitive force, such as disorders like clenching, cause teeth or oral tissue damage. These kinds of disorders usually present pathologic attrition in the posterior teeth, resorption in alveolar bone, loss of teeth and destruction of occlusion. Wearing a mouthguard is believed to be effective in preventing these disorders. But its effect is not examined thoroughly enough. The purpose of this study is to identify whether mouthguard is effective in reducing strain caused by clenching. Mandibular first molars in the normal occlusal relationship without any history of dental treatment were chosen. Biaxial type strain gauge was placed on the buccal surface of the tooth. Having maximum occlusal force, measured by load cell, as a standard, clenching intensity were divided into three stages; moment of slightly tooth contact, medium bite force (50% of maximum bite force), maximum bite force. Strain occurring in dentition in each stage with and without mouthguard was measured. Changes in strain (on dentition) between each stage and difference in strain, between with or without mouthguard were recorded by PCD-300 analyzer and PCD-30 soft ware. The data was statistically analyzed by Wilcoxon signed rank test. The following results were drawn; Without mouthguard, strain given on dentition increased as the clenching force increased. With mouthguard, strain given on dentition also increased as the clenching force increased. With mouthguard, strain decreased, in all cases of clenching force stages. Data on the moment of slightly tooth contact stage, had no statistical significance. However, with mouthguard, 50-90% of decrease in strain could be obtained in maximum occlusal force, compared to the group without mouthguard. Mouthguard decreased the strain on the dentition, caused by clenching. Therefore, mouthguard seems to be effective in preventing damage on dentition, by acting against clenching, which occurs both consciously and unconsciously during sports activities.

• Journal of Korean Society of Forest Science
• /
• v.89 no.1
• /
• pp.24-32
• /
• 2000

We investigated the patterns of soil horizon evolution and its water distribution on three different forest stands covered with Larix leptolepis, Pinus koraiensis, and Qercus mongolica on the Experimental Forest of Kyunghee University, located in Kwangju, Kyunggi-Do. Compared to the properties of depths of O and A horizons evolved on the Pinus koraiensis stand, the depths of O and A horizons on the forest stands of Larix leptolepis and Qercus mongolica were shallower, indicating that the soil horizon were deeply influenced by geographical characteristics, its erosive and sedimentary distinction, vegetation cover and its population density. And the bulk densities of the sites selected were lower in the high slope gradient than that in the lower slope gradient at the same depth of soil profile. Therefore, the changes of the soil bulk densities were closely related to the soil organic matter and the vertical transport of soil particle throughout soil depths. On the other hand, the bulk density and organic matter content in soil can influence the water transport phenomena, resulting in decrease of the hydraulic conductivity as the increase in the bulk density, while the organic matter can not affect the hydraulic conductivity on the soil surface layer. For a rainfall infiltration characteristics from a lysimeter experiment established on the stand of Larix leptolepis, the bulk density and slope gradient strongly influenced the vertical transport of water, as well as the lateral movement of rainfall. Conclusively, the characteristics of water movement and distribution in the forest stand can be determined not by the geographical factor such as slope gradient but also by the bulk density and organic matter content remained in soils.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.8
• /
• pp.1158-1167
• /
• 2012

During the peeling, cutting, and shredding of wild root vegetables, the surface is exposed to air. This results in a rapid deterioration in quality and an increase in the potential of contamination by microorganisms, both of which reduce the shelf-life of wild root vegetables in retail markets. Thus, in this study, the effects of various washing treatments on the quality of wild root vegetables, including lotus root, burdock root, and bellflower root, were investigated at 10 and $24^{\circ}C$. Lotus root, burdock root and bellflower root were washed with 0.2% acetic acid (AA), 0.2% citric acid (CA), 500 ppm acidified sodium chlorite (ASC), and tap water (TW), which was used as a control, and stored at $10^{\circ}C$ and $24^{\circ}C$. The changes in total plate counts, coliform groups, polyphenol oxidase (PPO) activity, color, pH, and exterior appearance of the samples were then evaluated. The pH and initial microbial contamination levels were reduced when the root vegetables were washed with AA, CA, and ASC. In particular, initial population levels of total plate counts and coliform groups were not detected in lotus root and burdock root that had been washed with ASC and their growth was significantly (p<0.05) inhibited during storage at 10 and $24^{\circ}C$ when compared to the control (TW). In addition, the polyphenol oxidase (PPO) activities of the root vegetables washed with AA, CA and ASC were lower than that of root vegetables washed with TW. ASC was determined to be the most effective treatment for preventing microbial growth, tissue softening, and the development of browning and an unpleasant smell. At $10^{\circ}C$, the overall qualities of the wild root vegetables were maintained longer when compared to $24^{\circ}C$.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.2
• /
• pp.101-109
• /
• 2012

Traditional village forests in Jeju Island represent unique cultural landscape with a history of more than several hundred years as a national cultural asset in Korea. In this paper, the characteristics and meaning of traditional village forests in Jeju Island was compared with the Dangsan and Bibo forests at inland. There are 368 Oreums, parasitic volcano, and 391 shrines of Dang(Divine place) in Jeju. Life, culture and tradition of rural villages are all connected with the Dang and Oreum in Jeju. It has been found from this study that the village in Jeju were established as a cultural landscape on the surface of natural landscape. The features of traditional villages focused on the Dang and Oreum in Jeju Island were similar to the Dangsan and Bibo forestsat inland villages. The Oreum represents mountain and the Pojedan forest is newly found in Sangmyung-ri. The seashore areas are covered by vaocanic rocks in Jeju and large scale windbreaks are hardly found. The stone tower at Sinheung-ri built for blocking sand movement represents Bibo forest. The special attribute of the Dang in Jeju is that it is close to real life and believers are still remain. In 2009, the Jeju Chilmeoridang Yeongdeunggut ritual was nominated as an Intangible Cultural Heritage of Humanity by UNESCO. The shrine of Dang, however, has been degraded fast by construction of seashore road and Jeju Olle trail path. As for the world cultural heritage discussed at international conferences, it is important that there is sustainability on the right to enjoy cultural heritage. Integrated efforts from local residents, local governments and national government are needed to set up a management scheme for the Dang culture. Rural villages in Jeju with the Dang and Oreum are expected to get an international attention as to have traditional cultural landscapes of Korea.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.1
• /
• pp.1-17
• /
• 2002

The purpose of this study is to examine the possibility of thermal injury to bone tissues during an implant site preparation under the same condition as a typical clinical practice of $Br{\aa}nemark$ implant system. All the burs for $Br{\aa}nemark$ implant system were studied except the round bur The experiments involved 880 drilling cases : 50 cases for each of the 5 steps of NP, 5 steps of RP, and 7 steps of WP, all including srew tap, and 30 cases of 2mm twist drill. For precision drilling, a precision handpiece restraining system was developed (Eungyong Machinery Co., Korea). The system kept the drill parallel to the drilling path and allowed horizontal adjustment of the drill with as little as $1{\mu}m$ increment. The thermocouple insertion hole. that is 0.9mm in diameter and 8mm in depth, was prepared 0.2mm away from the tapping bur the last drilling step. The temperatures due to countersink, pilot drill, and other drills were measured at the surface of the bone, at the depths of 4mm and 8mm respectively. Countersink drilling temperature was measured by attaching the tip of a thermocouple at the rim of the countersink. To assure temperature measurement at the desired depths, 'bent-thermocouples' with their tips of 4 and 8mm bent at $120^{\circ}$ were used. The profiles of temperature variation were recorded continuously at one second interval using a thermometer with memory function (Fluke Co. U.S.A.) and 0.7mm thermocouples (Omega Co., U.S.A.). To simulate typical clinical conditions, 35mm square samples of bovine scapular bone were utilized. The samples were approximately 20mm thick with the cortical thickness on the drilling side ranging from 1 to 2mm. A sample was placed in a container of saline solution so that its lower half is submerged into the solution and the upper half exposed to the room air, which averaged $24.9^{\circ}C$. The temperature of the saline solution was maintained at $36.5^{\circ}C$ using an electric heater (J. O Tech Co., Korea). This experimental condition was similar to that of a patient s opened mouth. The study revealed that a 2mm twist drill required greatest attention. As a guide drill, a twist drill is required to bore through a 'virgin bone,' rather than merely enlarging an already drilled hole as is the case with other drills. This typically generates greater amount of heat. Furthermore, one tends to apply a greater pressure to overcome drilling difficulty, thus producing even greater amount heat. 150 experiments were conducted for 2mm twist drill. For 140 cases, drill pressure of 750g was sufficient, and 10 cases required additional 500 or 100g of drilling pressure. In case of the former. 3 of the 140 cases produced the temperature greater than $47^{\circ}C$, the threshold temperature of degeneration of bone tissue (1983. Eriksson et al.) which is also the reference temperature in this study. In each of the 10 cases requiring extra pressure, the temperature exceeded the reference temperature. More significantly, a surge of heat was observed in each of these cases This observations led to addtional 20 drilling experiments on dense bones. For 10 of these cases, the pressure of 1,250g was applied. For the other 10, 1.750g were applied. In each of these cases, it was also observed that the temperature rose abruptly far above the thresh old temperature of $47^{\circ}C$, sometimes even to 70 or $80^{\circ}C$. It was also observed that the increased drilling pressure influenced the shortening of drilling time more than the rise of drilling temperature. This suggests the desirability of clinically reconsidering application of extra pressures to prevent possible injury to bone tissues. An analysis of these two extra pressure groups of 1,250g and 1,750g revealed that the t-statistics for reduced amount of drilling time due to extra pressure and increased peak temperature due to the same were 10.80 and 2.08 respectively suggesting that drilling time was more influenced than temperature. All the subsequent drillings after the drilling with a 2mm twist drill did not produce excessive heat, i.e. the heat generation is at the same or below the body temperature level. Some of screw tap, pilot, and countersink showed negative correlation coefficients between the generated heat and the drilling time. indicating the more the drilling time, the lower the temperature. The study also revealed that the drilling time was increased as a function of frequency of the use of the drill. Under the drilling pressure of 750g, it was revealed that the drilling time for an old twist drill that has already drilled 40 times was 4.5 times longer than a new drill The measurement was taken for the first 10 drillings of a new drill and 10 drillings of an old drill that has already been used for 40 drillings. 'Test Statistics' of small samples t-test was 3.49, confirming that the used twist drills require longer drilling time than new ones. On the other hand, it was revealed that there was no significant difference in drilling temperature between the new drill and the old twist drill. Finally, the following conclusions were reached from this study : 1 Used drilling bur causes almost no change in drilling temperature but increase in drilling time through 50 drillings under the manufacturer-recommended cooling conditions and the drilling pressure of 750g. 2. The heat that is generated through drilling mattered only in the case of 2mm twist drills, the first drill to be used in bone drilling process for all the other drills there is no significant problem. 3. If the drilling pressure is increased when a 2mm twist drill reaches a dense bone, the temperature rises abruptly even under the manufacturer-recommended cooling conditions. 4. Drilling heat was the highest at the final moment of the drilling process.

• Korean Journal of Veterinary Research
• /
• v.21 no.2
• /
• pp.105-112
• /
• 1981

The morphological and structural studios of Anisakinae larva has been carried out since Sept. of 1980. The larva were collected from naturally infested eleven swine of 1,531 examined at Kwang-Ju abattoir and from marine fishes, Somber japonicus, bought at Kwang-Ju fish market. The results observed were as follow : 1. Anisakis larva found in the stomach wall and on the surface of the mucosa were more or less degenerated. According to the progress of degeneration, the cross sections showed varied structures (Fig. 6, 7). 2. Size of the larva both from swine and fishes were measured respectively in average(mm); 18.0 and 18.7 in body length, 0.30 and 0.41 in body width, 1.64 and 1.68 in esophagus(muscular-part), 0.56 and 0.67 in ventriculus (glandular part), and 0.13 and 0.12 in tail. It was notable that body length of the larva in this present data, 18.0mm and 1.87mm, were shorter than those in previous dada, 24.3mm from human cases and 28.4mm from, however, the present data were almost similar to the data, 1.75mm, from swine case. 3. The Boring tooth, Mucron, long ventriculus and short round tail were observed in the larva of this present study. These structures were differentiated from Anisakis type II larvae which was provided with short ventriculus, and conical and tapering tall without mucron. 4. The ventricular appendix and intestnal caecum were not present in the larva. These might be differentiated from other Anisakidae larva such as Terranova larvae, Contracaecum larvae, Raphidascaris larvae and Thynnascaris larvae. 5. The findings through the histological observation were a pair of Y-shaped or butterfly-shaped lateal chords, ventral and dorsal chords, excretory(Renette) cell, high columnar epithelial cells of digestive tract and muscle cells. These morphological characteristics revealed varied features in the structures in the degenerative degree of the larva in the stomach wall. 6. The above-mentioned characteristics of the larva observed could be indentified as Anisakis type I larvae. 7. The reports on natural infestation of domestic animal with Anisakis type I larvae were two swine cases in Korea and Japan respectively, On the other hand two human cases of the larva were reported in Korea and more than one thousand cases in Japan. In Twiwan no reports of human and domestic animal cases could be found.

• Korean Journal of Plant Taxonomy
• /
• v.31 no.3
• /
• pp.283-309
• /
• 2001

Acer pictum complex (A. pictum Thunb. ex Murray with varieties, A. okamotoanum Nakai, A. truncatum Bunge) in eastern Asia causes frequent difficulty in identification. One hundred twenty five specimens from A. pictum complex of China, Korea and Japan and A. cappadocicum var. sinicum of China were compared to investigate patterns of intra- and interspecific variation and to evaluate a recognition of several species as well as many varieties using 22 characters for morphometric analysis. The first three PCA accounted for 59% of the total variance. No strong discontinuities existed among taxa with respect to fruit and leaf characters. Much overlap among all taxa occurred the central region of the scatter diagram. Many characters appeared to show some clinal variation with changes from east of China to Japan through Korea. This was true not only when all species as considered as a single taxon, but when characters of individual taxa were compared with geography. As one considers a path from the western part of the ranges to areas to the east, the leaves become larger in most respects and become increasingly many lobed (five to seven or nine). In general, there was a tendency toward larger nutlet with smaller wing in the area toward northeast of China (=A. truncatum), while in the east of ranges (Island Ullung-do), plants were larger with respect to characters of fruit and leaves (=A. okamotoanum). The morphological differentiation between A. okamotoanum and Japanese and Korean individuals of A. pictum was not considered sufficient to warrant recognition of either specific or varietal status and should be treated as con specific under A. pictum var. mono. Since the lectotype of Acer pictum had minute hairs uniformly on the under surface of leaves(A. pictum var. pictum), the glabrous type of A. pictum was called A. pictum var. mono as Ohahsi suggested. The univaraite analysis (the mean and maximum/minium of nutlet size and wing/nutlet length ratio) indicated geographical differentiation of northeastern populations, A. truncatum, was distinctive, but Korean individuals of A. truncatum showed an affinity between Chinese individuals of A. truncatum and Korean individuals of A. Pictum var. mono. The current results, together with qualitative character, trunk features, justify subspecific status for this taxon. The previous varieties of A. mono in Korea were indistinguishable from typical form of A. Pictum var. mono on the basis of the wing angle and nutlet size, rejecting continued recognition of these taxa as distinctive varieties. Therefore, it is recommended that only one polymorphic species of A. pictum be recognized in addition to three varieties.