• Journal of the Korean Society for Heat Treatment
• /
• v.13 no.3
• /
• pp.151-157
• /
• 2000

This study aims to investigate the effect of carbon content on the surface nitrogen permeation of 13%Cr-1.8%Al alloyed stainless steels. The surface nitrogen permeation was performed at $1050^{\circ}C{\sim}1200^{\circ}C$ in the $1kg/cm^2$ nitrogen gas atmosphere. The nitrogen permeated surface layer of the specimen containing 0.03%C consists of AlN, martensite and retained austenite phases. while the surface layer of the specimen containing 0.14%C appears the $AlFe_3C_x$ phase including former three phases. The specimen containing 0.14%C shows lower total case depth than that containing 0.03%C at the nitrogen permeation temperatures of $1050^{\circ}C$ and $1100^{\circ}C$, while the total case depth of the specimen containing 0.14%C is remarkably increased at the temperature of $1150^{\circ}C$ and $1200^{\circ}C$ due to the increase in the retained austenite content. Martensitic phase, AlN and $AlFe_3C_x$ precipitate of the nitrogen permeated surface layer cause to increase the surface hardness of 550~600Hv.

• Applied Chemistry for Engineering
• /
• v.31 no.1
• /
• pp.49-56
• /
• 2020

In this study, surface modification of CaCO₃ nanoparticles by a silane coupling agent propyltrimethoxysilane (PTMS) was conducted and the effect of surface hydrophobicity on the stability of foam and emulsion was studied in order to test the potential applicability as a foam stabilizer or an emulsifier. The surface modification of CaCO₃ nanoparticles by PTMS was confirmed by FT-IR, DSC and TGA analysis. The atomic concentration of CaCO₃ particle surface treated by PTMS has been also identified by using XRD and XPS analyses. Both floating tests and contact angle measurements were also performed to examine the effect of PTMS concentration on the surface modification of CaCO₃ nanoparticles.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.421-425
• /
• 2013

The effect of pretreatment on indium-tin oxide (ITO) electrodes has been rarely studied, although that on metal and carbon electrodes has been enormously done. The electrochemical and surface properties of ITO electrodes are investigated after 6 different pretreatments. The electrochemical behaviors for oxygen reduction, $Ru(NH_3){_6}^{3+}$ reduction, $Fe(CN){_6}^{3-}$ reduction, and p-hydroquinone oxidation are compared, and the surface roughness, hydrophilicity, and surface chemical composition are also compared. Oxygen reduction, $Fe(CN){_6}^{3-}$ reduction, and p-hydroquinone oxidation are highly affected by the type of the pretreatment, whereas $Ru(NH_3){_6}^{3+}$ reduction is almost independent of it. Interestingly, oxygen reduction is significantly suppressed by the treatment in an HCl solution. The changes in surface roughness and composition are not high after each pretreatment, but the change in contact angle is substantial in some pretreatments.

• Applied Chemistry for Engineering
• /
• v.9 no.3
• /
• pp.377-382
• /
• 1998

This study was carried out to investigate the relation between surface acidity and interfacial electrical characteristics of surface-treated ${\gamma}-alumina$ whose surface activity was increased. The points of zero charge (P. Z. C.) of ${\gamma}-alumina$ whose surface is treated with the sulfuric, nitric and hydro-chloric acid of various concentration were measured from the site-binding theory and mass transport method. The surface active sites were measured by amine titration method and Hammett indicator method. The interfacial properties at alumina/KCl(aq) interface were measured by potentiometric titration. From the experimental results, the following results were obtained. Pure ${\gamma}-alumina$ surface acidity decreases with the increase of calcination temperature at strength $H_o{\leq}+9.3$ Surface-treated alumina acidic properties increase with the anion loading on alumina surface. The surface ionization constants decrease with anion loading on alumina surface, then P. Z. C. decreases with acid amount on alumina surface. Acid amount of surface treated alumina can be correlated with surface charge density at strength $H_o{\leq}+4.8$ as follows. $SO_4^2-/Al_2O_3:Q_A=-0.172ln(0.0418{\sigma}+1.448)$ $NO_3^-/Al_2O_3:Q_A=-0.024{\sigma}-0.0189$ $Cl^-/Al_2O_3:Q_A=-0.01{\sigma}-0.2006$.

• Carbon letters
• /
• v.4 no.1
• /
• pp.31-35
• /
• 2003

The specific adsorption behaviors of activated carbons (ACs) treated with 30 wt% $H_3PO_4$ or NaOH were investigated in the removals of NO or $NH_3$. The acid and base values were determined by Boehm's titration method. And, the surface properties of ACs were studied by FT-IR and XPS analyses. Also, $N_2/77K$ adsorption isotherm characteristics, including the specific surface area and micropore volume were studied by BET and t-plot methods, respectively. From the adsorption tests of NO and $NH_3$, it was revealed in the case of acidic treatment on ACs that the $NH_3$ removal was more effective due to the increase of acidic functional groups in carbon surfaces. Also, the NO removal was increased, in the case of basic treatment, due to the improvement of basic functional groups, in spite of significant decreases of BET's specific surface area and total pore volume. It was found that the adsorption capacity of ACs was not only determined by the textural characteristics but also correlated with the surface functional groups in the acid-base intermolecular interactions.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.1 s.114
• /
• pp.21-36
• /
• 2006

This study was undertaken to analyze the effects of pavement thermal properties and water retention characteristics on the surface temperature of the gray permeable cement concrete pavement during the summer. Following is a summary of major results. 1) The hourly surface temperature of pavement could be well predicted with a heat transfer model program that incorporated the input data of major meteorological variables including solar radiation, atmospheric temperature, dew point, wind velocity, cloudiness and the evaporation rate of the pavements predicted by the time domain reflectometry (TDR) method. 2) When the albedo was changed to 0.5 from an arbitrary starting condition of 0.3, holding other variables constant, the peak surface temperature of the pavement dropped by 11.5%. When heat capacity was changed to $2.5\;kJm^{-3}K^{-1}\;from\;1.5\;kJm^{-3}K^{-1}$, surface temperature dropped by 8.0%. When daily evaporation was changed to 1 mm from 2 mm, temperature dropped by 5.7%. When heat conductivity was changed to $2.5\;Wm^{-1}K^{-1}\;from\;1.5\;Wm^{-1}K^{-1}$, the peak surface temperature of the pavement fell by 1.2%. The peak pavement surface temperature under the arbitrary basic condition was $24.46^{\circ}C$ (12 a.m.). 3) It accordingly became evident that the pavement surface temperature can be most effectively lowered by using materials with a high albedo, a high heat capacity or a high evaporation at the pavement surface. The glare situation, however, is intensified by raising of the albedo, moreover if reflected light is absorbed into surrounding physical masses, it is changed into heat. It accordingly became evident that raising the heat capacity and the evaporative capacity may be the moot acceptable measures to improve the thermal characteristics of the pavement. 4) The sensitivity of the surface temperature to major meteorological variables was as follows. When the daily average temperature changed to $0^{\circ}C\;from\;15^{\circ}C$, holding all other variables constant, the peak surface temperature of the pavement decreased by 56.1 %. When the global solar radiation changed to $200\;Wm^{-2}\;from\;600\;Wm^{-2}$, the temperature of the pavement decreased by 23.4%. When the wind velocity changed to $8\;ms^{-1}\;from\;4\;ms^{-1}$, the temperature decreased by 1.4%. When the cloudiness level changed to 1.0 from 0.5, the peak surface temperature decreased by 0.7%. The peak pavement surface temperature under the arbitrary basic conditions was $24.46^{\circ}C$ (12 a.m.)

• Journal of the Korean institute of surface engineering
• /
• v.40 no.3
• /
• pp.144-148
• /
• 2007

To prepare the transparent electrode for electronic devices such as flat panel or flexible displays, solar cells, and touch panels; tin doped $In_2O_3$ (ITO) films with low resistivity and a high transparency were fabricated using a facing target sputtering (FTS) system at the various oxygen gas flow rate. The carrier concentration and mobility of ITO films were measured by Hall Effect measurement. And the transmittance was measured using the UV-VIS spectrometer. As a result, we can obtain the ITO thin films prepared at 10% oxygen gas flow ratio, thickness 150 nm with transmittance 85% and resistivity $8.1{\times}10^{-4}{\Omega}cm$ and surface roughness 5.01 nm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.16-17
• /
• 2007

To improve efficiency of solar cells, it is important to make a light trapping structure to reduce surface reflectance for increasing absorption of sun light within the solar cells. One of the promising methods that can reduce surface reflectance is isotropic texturing with acid solution based on hydrofluoric acid(HF), nitric acid($HNO_3$), and organic additives. Anisotropic texturing with alkali solution is not suitable for multicrystalline silicon wafers because of its different grain orientation. Isotropic texturing with acid solution can uniformly etch multicrystalline silicon wafers unrelated with grain orientation, so we can get low surface reflectance. In this paper, the acid texturing solution is made up of only HF and $HNO_3$ for easy controling the concentration and low cost compared to acid solution with organic additives. $HNO_3$ concentration and dipping time were varied to find the condition of minimum surface reflectance. Textured surfaces were observed Scanning Electron Microscope(SEM) and surface reflectance were measured. The best result of arithmetic mean(wavelength from 400nm to 1000nm) reflectance with acid texturing is 4.64% less than alkali texturing.

• Journal of The Korean Society of Integrative Medicine
• /
• v.3 no.3
• /
• pp.9-16
• /
• 2015

Purpose : The purpose of this study was to demonstrate the effects of lumbar stabilization exercise on static and dynamic balance performance with unstable supporting surface and an even surface. Methods : The subjects of this experimental study were 30 patients among hospitalized stroke patients. They were randomly divided into two groups: unstable supporting surface group(USS; n=15) and an even surface group(ES; n=15). The lumbar stabilization exercise program for patients in two groups went through 40 minute exercise sessions three times a week for 8 weeks. To analyze the effects of a variety of supporting surface, Functional reaching test(FRT), Berg's balance scale(BBS), and Overall stability index(static balance) were measured before and after the exercise. The paired t-test was used to compare mean differences between before and after exercis and the independent t-test was used to compare mean differences between groups. Results : After 8 weeks exercise program, there were significant differences between before and after exercise in FRT, BBS, and static balance. But there were not significant differences in balance between two groups. Conclusion : This study suggest that lumbar stabilization exercise on unstable supporting surface and an even surface can improve FRT, BBS, and a static balance.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.6
• /
• pp.587-594
• /
• 2016

Various surface treatments and thin film coating processes on the surface of injection die steel have been developed to extend the life. Most of previous studies were mainly focused on investigating the wear and static bonding behavior of thin films. In this study complex surface treatments of DLC coating combined with ion nitriding were applied to increase fatigue life and wear resistance. Ion nitriding, DLC coating, and DLC coating following nitriding on the surface of Fe-3.0Ni-0.7Cr-1.4Mn-X steel were investigated to uncover the beneficial effect which is applicable to injection die. The effect of various surface treatments and coating conditions on high cycle fatigue resistance was studied. Surface morphology change during fatigue tests were observed with AFM. Fatigue life of the die steel increased by 10 to 1,000 times at the various level of stress amplitudes in the condition of DLC coating following the ion nitriding for 3 hrs comparing with the only DLC coated condition.