• Nuclear Engineering and Technology
• /
• v.56 no.6
• /
• pp.2057-2062
• /
• 2024

Among photon counting detector (PCD)-based technologies, the K-edge subtraction (KES) method has a very high material decomposition efficiency. Yet, since the increase in noise in the X-ray image to which the KES method is applied is inevitable, research on image quality improvement is essential. Here, we modeled a block-matching and 3D filtering (BM3D) algorithm and applied it to PCD-based X-ray images with the improved KES (IKES) method. For PCD modeling, Monte Carlo simulation was used, and a phantom composed of iodine substances with different concentrations was designed. The IKES method was modeled by adding a log term to KES, and the X-ray image used for subtraction was obtained by applying the 3.0 keV range based on the K-edge region of iodine. As a result, the IKES image using the BM3D algorithm showed the lowest normalized noise power spectrum value. In addition, we confirmed that the contrast-to-noise ratio and no-reference-based evaluation results when the BM3D algorithm was applied to the IKES image were improved by 29.36 % and 20.56 %, respectively, compared to the noisy image. In conclusion, we demonstrated that the IKES imaging technique using a PCD-based detector and the BM3D algorithm fusion technique were very efficient for X-ray imaging.

• Journal of radiological science and technology
• /
• v.7 no.1
• /
• pp.13-21
• /
• 1984

Subtraction is an essential technic to improve imaging quality in various radiological procedures. The limitations of subtraction, however, are well known. Blurred under-subtraction (BUS) method has been suggested to overcome and compensate these limitations. Ten cases of angiography were subtracted by conventional subtraction and BUS technic. Results of this study revealed that BUS method is simple to perform and imaging quality obtained by BUS is excellent. Comparing to conventional subtraction, BUS method has advantages. For example, BUS need no mask film or no immobilization of patient during examination. Improvement of imaging Qualify is achieved by edge enhancement, homogeneous blurring of background density and increasing contrast. With emphasis of its simplicity in technic, we would report that BUS method is a useful adjunct imaging technic in various radiological procedures.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.4
• /
• pp.782-804
• /
• 2011

In video-based recognition systems, stationary cameras are used to monitor an area of interest. These systems focus on a segmentation of the foreground in the video stream and the recognition of the events occurring in that area. The usual approach to discriminating the foreground from the video sequence is background subtraction. This paper presents a novel background subtraction method based on a probabilistic approach. We represent the posterior probability of the foreground based on the current image and all past images and derive an updated method. Furthermore, we present an efficient fusion method for the color and edge information in order to overcome the difficulties of existing background subtraction methods that use only color information. The suggested method is applied to synthetic data and real video streams, and its robust performance is demonstrated through experimentation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.10
• /
• pp.4092-4107
• /
• 2015

We propose a background subtraction method for moving cameras based on trajectory classification, image segmentation and label inference. In the trajectory classification process, PCA-based outlier detection strategy is used to remove the outliers in the foreground trajectories. Combining optical flow trajectory with watershed algorithm, we propose a trajectory-controlled watershed segmentation algorithm which effectively improves the edge-preserving performance and prevents the over-smooth problem. Finally, label inference based on Markov Random field is conducted for labeling the unlabeled pixels. Experimental results on the motionseg database demonstrate the promising performance of the proposed approach compared with other competing methods.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.477-480
• /
• 2005

In this paper, we propose a preprocess method to needs for Car License Plate Recognition on poor environment. This preprocess method use multi images to get low value to compare images value. Last method was Opening operation that Using Edge pixel to add and subtraction. The Result was removed White pixel and very mini feather. But This method needs many process times and License Plate Recognition is low quality problem. Another method is median filter and conversion. This paper key idea that rain & snow is high value. So This paper propose get low value to compare image value.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.6
• /
• pp.213-224
• /
• 2003

The proposed algorithm can always set up the optimal threshold value regardless of channel characteristics using an adaptive threshold establishment method that determines the threshold level according to channel noise power, and then it uses the specially designed training symbols that can make the algorithm's estimation performance be less sensitive to power delay profile variation in a multipath channel. In result, the estimation performance of the proposed technique is less affected by channel characteristic variation.

• Journal of Advanced Navigation Technology
• /
• v.12 no.2
• /
• pp.164-169
• /
• 2008

This paper is using motion tracking by image segmentation to monitor intruders and to confirm based on mobile the relevant information. First, detect frame in animation that film fixed area, and make use of image subtraction between two frame that adjoin, segment fixed backing and target who move. Segmental foreground object to the edge detecting the location specified by the edge of the median estimate extracted by analyzing the motion of the intruders to monitor. When a motion is detected, the detected image is transmitted by using the W AP pull basis image transmission method on the mobile client data terminal.

• Journal of Biosystems Engineering
• /
• v.27 no.4
• /
• pp.341-348
• /
• 2002

Quality evaluation of red ginsengs is determined by outer shape and inner qualities. Especially, the inner qualities are main grading criteria. Currently, red ginsengs are classified into 3-grades; heaven, earth and good. The best heaven grade must not include inner holes and sponge tissues. This study was conducted to develop a red ginseng sorting system using x-ray image processing technique. Because of lens characteristic, gray values of the central region in the x-ray image are higher and gradually decreased towards the edge regions. This difference of gray values gives trouble in segmentation and detection of inner holes in red ginseng image, so preprocessing technique is necessary. The preprocessing was done by subtracting source image from an empty background image. But, simple subtraction was not quite appropriate because of too small contrast between inner holes and sound part. Scaled subtraction images were obtained by multiplying all gray values by some numbers. However this method could not help to set threshold value because the gray values of root part are generally lower than body part when red ginseng is exposed to the x-ray. To determine threshold value for detecting inner holes, an algorithm was developed by increasing overall gray values of less clear images.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.5
• /
• pp.42-51
• /
• 2001

Vehicle detection is the basic of traffic monitoring. Video based systems have several apparent advantages compared with other kinds of systems. However, In video based systems, shadows make troubles for vehicle detection, especially active shadows resulted from moving vehicles. In this paper, a new method that combines background subtraction and edge detection is proposed for vehicle detection and shadow rejection. The method is effective and the correct rate of vehicle detection is higher than 98% in experiments, during which the passive shadows resulted from roadside buildings grew considerably. Based on the proposed vehicle detection method, vehicle tracking, counting, classification and speed estimation are achieved so that traffic parameters concerning traffic flow is obtained to describe the load of each lane.