• Nuclear Engineering and Technology
• /
• 제33권3호
• /
• pp.298-306
• /
• 2001

As fuel burnup proceeds, thermal gradients, differential swelling, and inter-assembly loading may induce assembly duct bowing. Since duct bowing affects the reactivity, such as long or short term power-reactivity-decrement variations, handling problem, caused by top end deflection of the bowed assembly duct, and the integrity of the assembly duct itself. Assembly duct bowing were first observed at EBR-ll in 1965, and then several designs of assembly ducts and core restraint system were used to accommodate this problem. In this study, NUBOW-2D KMOD was used to analyze the bowing behavior of the assembly duct under the KALIMER(Korea Advanced Liquid MEtal Reactor) core restraint system conditions. The mechanical behavior of assembly ducts related to several design parameters are evaluated. ACLP(Above Core Load Pad) positions, the gap distance between the ducts, and the gap distance between the duct and restraint ring were selected as the sensitivity parameter for the evaluation of duct deflection.

• 한국전산유체공학회지
• /
• 제6권1호
• /
• pp.21-30
• /
• 2001

A numerical study on the similarity of the developing laminar flows between in a straight duct rotating about an axis perpendicular to that of the duct and in a stationary curved duct was carried out. In order to clarify the analogy of two flows, dimensionless parameters K/sub LR/ = Re/(equation omitted) and Rossby number, Ro, in a rotating straight duct were used as a set corresponding to Dean number K/sub LC/ = Re/(equation omitted), and curvature ratio, λ, in a stationary curved duct. For the large values of Ro and λ, it is shown that the flow field satisfies the 'asymptotic invariance property', that is, there are strong quantitative similarities between the two flows such as flow patterns, friction factors, and maximum axial velocity magnitudes for the same values of K/sub LR/ and K/sub LC/ if they are correlated with dimensionless axial distances Z/sub R/ = z/(equation omitted) for a rotating duct flow and Z/sub C/ = z/(equation omitted) for a stationary curved duct flow.

• 대한방사선기술학회지:방사선기술과학
• /
• 제21권1호
• /
• pp.40-45
• /
• 1998

To determine its usefulness and safety of extracorporeal shock-wave lithotripsy in common bile duct and pancreatic duct stones, we analyzed the results of 13 patients with common bile duct stones and 6 patients with pancreatic duct stones which were removed by endoscopic procedures using the balloon or basket, who was performed the extracorporeal shock-wave lithotripsy using the ultrasonography for stone localization with a spark gap type Lithotriptor(Dernier MPL 9000, Germany). Fragmentation and complete clearance of the common bile duct and pancreatic duct stones were obtained in 19 of 19 patients(100%). Apart from transient attacks of fever in 2 of 13 patients with common bile duct stones(15%) and mild elevation of serum amylase and lipase in 2 of 6 patients with pancreatic duct stones(33%), no other serious side effects were observed. In our experiences, extracorporeal shock-wave lithotripsy is a safe and useful treatment for endoscopically unretrievable common bile duct and pancreatic duct stones.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권3호
• /
• pp.414-430
• /
• 2013

This paper shows the study of preswirl duct as an effective energy saving devices that have been devised and reviewed to support the propeller performance, especially for the ship of VLCC with large block coefficients. From the bare hull wake measurements, typical upper/lower asymmetry of hull wake at the propeller disk was found. The 2 kinds of pre-swirl duct, Unconventional half circular duct and Conventional circular pre-swirl duct have been designed and reviewed to recover the loss of propeller running in that condition. The general function of the pre-swirl duct was set to work against this asymmetry of wake and generate pre-swirled flow into the propeller against the propeller rotating direction. The optimum self propulsion tests with various angle configurations were carried out and the best configuration was decided. Accordingly, cavitation test was carried out with best configuration of unconventional half circular duct. The blade surface and tip vortex cavitation behaved smoother when the duct was mounted. The hull pressure amplitudes reflected this difference, so the hull pressure amplitude with duct was smaller than that of without duct.

• Clinical and Experimental Reproductive Medicine
• /
• 제15권2호
• /
• pp.157-164
• /
• 1988

We found reports of only about 20 cases of well documented ejaculatory duct obstruction presenting with infertility and treated by TUR. While infertility caused by ejaculatory duct obstruction is rare accurate diagnosis by vasoseminal vesiculography is important, since these obstructions may be treatable. In our 29 patients undergoing vasoseminal vesiculography for 1 year to demonstrate obstruction site in seminal tract the ejaculatory duct obstruction was found in 6 patients. The intial methods of treament were TUR of the ejaculatory duct in 2 patients, forceful lavage of ejaculatory duct through the vas deferens in 4 patients. One patient's wife who had undergone TUR of the ejaculatory duct delivered a normal female baby 15 months postoperatively. In one patient who had undergone forceful lavage of ejaculatory duct semen analysis returns to normal level except the motility. When initial methods of treatment fail to get the normal semen we have the plan to perform TUR of the ejaculatory duct or aspiration of seminal fluid in the seminal vesicle under the control of the ultrasonography for AIH according to the level of ejaculatory duct obstruction. Our report suggests that ejaculatory obstruction has been underdiagnosed and should receive more attention by urologist.

• 대한핵의학회지
• /
• 제30권1호
• /
• pp.126-129
• /
• 1996

Spontaneous perforation of CBD in infant is a rare but fatal disease. We report a case of bile leakage from common bile duct in 11 months old girl with progressive abdominal distension and vomiting, preoperatively diagnosed by hepatobiliary scan with 99mTc-DISIDA, which was confirmed by surgery, Operative cholangiogram showed a small perforation at the confluence of cystic duct and common bile duct with mild fusiform dilatation, and no definite abnormality in confluence of the common bile duct and pancreatic duct. Simple drainage of the free peritoneal bilous fluid and T-tube drainage were performed without any evidence of the complication. Patient was inevitable for 6 months OPD follow-up examination.

• 대한조선학회논문집
• /
• 제56권4호
• /
• pp.373-382
• /
• 2019

This paper shows numerical results for the estimation of the propulsor efficiency of Pre-Swirl Duct for 176k bulk carrier as well as its design method. Reynolds averaged Navier-Stokes equations have been solved and the k-epsilon model applied for the turbulent closure. The propeller rotating motion is determined using a sliding mesh technique. The design process is divided into each part of Pre-Swirl Duct, duct and Pre-Swirl Stator. The design of duct was performed first because it is located further upstream than Pre-Swirl Stator. The distribution of velocity through the duct was analyzed and applied for the design of Pre-Swirl Stator. The design variables of duct include duct angle, diameter, and chord length. Diameter, chord length, equivalent angle are considered when designing the Pre-Swirl Stator. Furthermore, a variable pitch angle stator is applied for the final model of Pre-Swirl Duct. The largest reduction rate of the delivered power in model scale is 7.6%. Streamlines, axial and tangential velocities under the condition that the Pre-Swirl Duct is installed were reviewed to verify its performance.

• 대한기계학회논문집B
• /
• 제25권5호
• /
• pp.731-740
• /
• 2001

A numerical study on the quantitative analogy between the fully developed turbulent flow in a straight square duct rotating about an axis perpendicular to that of the duct and that in a stationary curved duct of square cross-section is carried out. In order to clarify the similarity of the two flows, dimensionless parameters K(sub)TR=Re(sup)1/4/√Ro and Rossby number, Ro, in a rotating straight duct flow were used as a set corresponding to K(sub)TC=Re(sup)1/4/√λ and curvature ratio, λ, in a stationary curved duct flow so that they have the same dynamical meaning as those of the fully developed laminar flows. For the large values of Ro or λ, it is shown that the flow field satisfies the asymptotic invariance property, that is, there are strong quantitative similarities between the two flows such as flow patterns and friction factors for the same values of K(sub)TR and K(sub)TC.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.67-74
• /
• 2005

Fluid flow and heat transfer in rectangular duct system are measured and computed by commercial software of Star-CD for comparison between them. Three rectangular systems are investigated in this study. Those are a rectangular duct with 90 degree bended elbow, a rectangular duct with two branchs, and a circular cylinder in a rectangular duct. But heat transfer is studied only for last system. These investigations show us that the numerical solutions predict satisfactorily design factors (K-factor for the elbowed duct, distributions of flow rates into each branch from a duct, and Nusselt number around circular cylinder) even though there are some disagreements in velocity profiles and turbulent kinetic energy.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.825-830
• /
• 2001

A numerical study on a quantitative analogy of the fully developed flow between in a straight square duct rotating about an axis perpendicular to that of the duct and a stationary curved duct of square cross-section is carried out. In order to clarify the similarity of two turbulent flows, the dimensionless parameters $K_{TR} = Re^{1/4}/\sqrt{Ro}$ and the Rossby number, Ro, in a rotating straight duct flow were used as a set corresponding to $K_{TC} = Re^{1/4}/\sqrt{{\lambda}}$ and curvature ratio, ${\lambda}$, in a stationary curved duct flow so that they have the same dynamical meaning as $K_{LR} = Re/\sqrt{Ro}$ and $K_{LC} = Re/\sqrt{{\lambda}}$ of the fully developed laminar flows. For the large values of Ro or A, it is shown that the flow field satisfies the asymptotic invariance property: there are strong quantitative similarities between the two flows such as flow patterns and friction factors for the same values of $K_L$ and $K_T$.