• Culinary science and hospitality research
• /
• v.22 no.8
• /
• pp.27-38
• /
• 2016

This study examined the nutrient components and physicochemical properties of Acer termentosum Maxim. leaf as a natural health food source. To accomplish this purpose, the general and antioxidative contents of Acer termentosum Maxim leaf were measured. Total contents of carbohydrates, crude protein, crude lipid, and ash were 53.6%, 24.3%, 3.5%, and 3.5%, respectively. Caloric content of Acer termentosum Maxim was 246.5 kcal, while total dietary fiber was 46.7%. Regarding mineral contents, K was the most abundant mineral, followed by Ca, Mg, and P. Therefore, Acer termentosum Maxim is an alkali material. Total phenol contents of the 70% ethanolic extracts of Acer termentosum Maxim was $116.35{\pm}1.4mg\;GAE/g$. Total flavonoid contents of the 70% ethanolic extracts were $20.3{\pm}1.23mg\;RE/g$. The antioxidative activities of Acer termentosum Maxim. were significantly increased in a dose dependent manner on DPPH(1,1-Diphenyl-2-picrylhydrazyl) radical scavenging, ABTS (2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt) radical scavenging, FRAP (ferric reducing antioxidant power) activity, reducing power. It is expected that follow up study of Acer termentosum Maxim through developing processed food and evaluation of their functional properties would provide useful information as a source of functional foods.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.40 no.1
• /
• pp.29-36
• /
• 2020

This study was conducted to suggest the new grassland grade system on evaluating the grassland status. The grassland status has been evaluated based on the forage yield (good, fair and poor) by municipal authorities. The grassland grades by current system were 19 good, 11 fair and 11 poor among the 41 grassland farms from 6 provinces. This evaluation result differed greatly from the result of actual measurement of forage yields which showed all poor. The big difference was resulted from failing the reflection of the various characteristics, such as different seasonal growth and harvest frequency. Furthermore, the lack of consistent examining date and method added the inaccuracy of current grassland grade system. The new grassland grade system based on the grassland vegetation ratio (grass, weed and bare soil) was initially designed into 6-grade system (1st; 100~80%, 2nd; 79~60%, 3rd; 59~40%, 4th; 39~20%; 5th; 19~1% and 6th; 0% on the basis of grasses proportion), but later was changed into 4-grade system (1st, 2nd, 3rd, and 4th grades are 70% or more, 50% or more, 50% or less, and 0% of forage proportion, respectively) after reflecting the opinion of grassland farms and municipal authorities. Re-evaluation on the grassland status using the 4-grade system resulted in the total 80% consisted of 2nd, 3rd and 4th grade which means most grasslands needs the partial reseeding or the rehabilitation of entire grassland. Pictures and schematic diagrams depicting the 4-grade system were presented to improve the objectivity of evaluation. The optimal time for assessing grassland status is fall when plant height 20~30 cm. Conclusively, the 4-grade system is an efficient method for all non-professionals including grassland farms or municipal authorities in assessing the grassland status. To apply this system to the field, the institutional arrangements such as amendment of grassland act should take place in advance.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.1
• /
• pp.43-48
• /
• 2014

Purpose: In the PET/CT images, The SUV (standardized uptake value) enables the quantitative assessment according to the biological changes of organs as the index of distinction whether lesion is malignant or not. Therefore, It is too important to enter parameters correctly that affect to the SUV. The purpose of this study is to evaluate an allowable error range of SUV as measuring the difference of results according to input errors of Activity, Weight, uptake Time among the parameters. Materials and Methods: Three inserts, Hot, Teflon and Air, were situated in the 1994 NEMA Phantom. Phantom was filled with 27.3 MBq/mL of 18F-FDG. The ratio of hotspot area activity to background area activity was regulated as 4:1. After scanning, Image was re-reconstructed after incurring input errors in Activity, Weight, uptake Time parameters as ${\pm}5%$, 10%, 15%, 30%, 50% from original data. ROIs (region of interests) were set one in the each insert areas and four in the background areas. $SUV_{mean}$ and percentage differences were calculated and compared in each areas. Results: $SUV_{mean}$ of Hot. Teflon, Air and BKG (Background) areas of original images were 4.5, 0.02. 0.1 and 1.0. The min and max value of $SUV_{mean}$ according to change of Activity error were 3.0 and 9.0 in Hot, 0.01 and 0.04 in Teflon, 0.1 and 0.3 in Air, 0.6 and 2.0 in BKG areas. And percentage differences were equally from -33% to 100%. In case of Weight error showed $SUV_{mean}$ as 2.2 and 6.7 in Hot, 0.01 and 0.03 in Tefron, 0.09 and 0.28 in Air, 0.5 and 1.5 in BKG areas. And percentage differences were equally from -50% to 50% except Teflon area's percentage deference that was from -50% to 52%. In case of uptake Time error showed $SUV_{mean}$ as 3.8 and 5.3 in Hot, 0.01 and 0.02 in Teflon, 0.1 and 0.2 in Air, 0.8 and 1.2 in BKG areas. And percentage differences were equally from 17% to -14% in Hot and BKG areas. Teflon area's percentage difference was from -50% to 52% and Air area's one was from -12% to 20%. Conclusion: As shown in the results, It was applied within ${\pm}5%$ of Activity and Weight errors if the allowable error range was configured within 5%. So, The calibration of dose calibrator and weighing machine has to conduct within ${\pm}5%$ error range because they can affect to Activity and Weight rates. In case of Time error, it showed separate error ranges according to the type of inserts. It showed within 5% error when Hot and BKG areas error were within ${\pm}15%$. So we have to consider each time errors if we use more than two clocks included scanner's one during the examinations.

• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.3
• /
• pp.451-459
• /
• 2015

Raw-red bean (RR) should be boiled in hot water, and only boiled-red bean (BR) has been used in the food industry. In the course of development of functional food using red- bean (Phaseolus radiatus L), hot- water extracts (HWEs) of RR and BR were prepared, respectively and their components and various biological activities were compared. The extraction yield at $100^{\circ}C$ of RR (16.2%) was higher than that of BR (14.8%), and contents of total polyphenols, total flavonoids and reducing sugars of HWE of RR were 2.5-fold, 2.1-fold and 1.5-fold higher than those of HWE of BR. In anti-oxidation activity assay, scavenging activities against DPPH anion and ABTS cation as well as reducing power of RR was higher than those of BR. The results suggest that the anti-oxidant compounds in red bean might be heat-liable or discarded during boiling in hot-water as a cooking drip. Unexpectedly, nitrite scavenging activity was stronger in HWE of BR than RR. In anti-microbial activity assay, HWE of RR ($500{\mu}g/disc$) showed growth inhibition activity against gram-positive bacteria, whereas HWE of BR did not show any activity against any tested bacteria and fungi. Assay of in-vitro anti-diabetes and anti-thrombosis activities, which were previously reported in ethanol extract of red-bean, revealed that HWEs of RR and BR did not show significant activities against ${\alpha}$-amylase, ${\alpha}$-glucosidase, thrombin, prothrombin, or blood coagulation factors. Our results suggest that the anti-oxidation, anti-diabetes and anti-thrombosis activities of HWEs of RR and BR were lower than those of ethanol extracts of red bean, and bioactive substances in RR were destroyed during boiling or discarded after boiling. Further research on suitable boiling and re-use of cooking drip of red bean is necessary.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.6
• /
• pp.1353-1365
• /
• 1997

Background : Tumor necrosis factor(TNF) has been considered as an important candidate for cancer gene therapy based on its potent anti-tumor activity. However, since the efficiency of current techniques of gene transfer is not satisfactory, the majority of current protocols is aiming the in vitro gene transfer to cancer cells and re-introducing genetically modified cancer cells to host. In the previous study, it was shown that TNF-sensitive cancer cells transfected with TNF-$\alpha$ cDNA would become highly resistant to TNF, and the probability was shown that the acquired resistance to TNF might be associated with synthesis of some protective protein. Understanding the mechanisms of TNF -resistance in TNF-$\alpha$ cDNA transfected cancer cells would be. an important step for improving the efficacy of cancer gene therapy as well as for better understandings of tumor biology. This study was designed to evaluate the role of MnSOD, an antioxidant enzyme, in the acquired resistance to TNF of TNF-$\alpha$ cDN A transfected cancer cells. Method : We transfected TNF-$\alpha$ c-DNA to WEHI164(murine fibrosarcoma cell line), NCI-H2058(human mesothelioma cell line), A549(human non-small cell lung cancer cell line), ME180(human cervix cancer cell line) cells using retroviral vector(pLT12SN(TNF)) and confirm the expression of TNF with PCR, ELISA, MIT assay. Then we determined the TNF resistance of TNF-$\alpha$ cDNA transfected cells(WEHI164-TNF, NCIH2058-TNF, A549-TNF, ME180-TNF) and the changes of MnSOD mRNA expressions with Northern blot analysis. Results : The MnSOD mRNA expressions of parental cells and genetically modified cells of WEHI164 and ME180 cells(both are naturally TNF sensitive) were not significantly different The MnSOD mRNA expressions of genetically modified cells of NCI-H2058 and A549(both are naturally TNF resistant) were higher than those of the parental cells, while those of parental cells with exogenous TNF were also elevated. Conclusion : The acquired resistance to TNF after TNF-$\alpha$ cDNA transfection may not be associated with the change in the MnSOD expression, but the difference in natural TNF sensitivity of each cell may be associated with the level of the MnSOD expression.

• Progress in Medical Physics
• /
• v.17 no.3
• /
• pp.179-186
• /
• 2006

Purpose: Photon beam data of linear accelerators in Korea are collected, analyzed, and a simple method for checking and verifying the dose calculations in a TPS are suggested. Materials and Methods: Photon beam data such as output calibration condition, output factor, wedge factor, percent depth dose, beam profile, and beam quality were collected from 26 institutions in Korea. In order to verify the accuracy of dose calculation, ten sample planning tests were peformed. These Include square, elongated, and blocked fields, wedge fields, off-axis dose calculation, SSD variation. The planned data were compared to that of manual calculations. Results: The average and standard deviation of photon beam quality for 6, 10, and 15 MV were $0.576{\pm}0.005,\;0.632{\pm}0.004,\;and\;0.647{\pm}0.006$, respectively. The output factors of 6 MV photon beam measured at depth of dose maximum for $5{\times}5cm,\;15{\times}15cm,\;20{\times}20cm\;were\;0.944{\pm}0.006,\;1.031{\pm}0.006,\;and\;1.055{\pm}0.007$. For 10 MV photon beam, the values were $0.935{\pm}0.006,\;1.031{\pm}0.007,\;1.054{\pm}0.0005$. The collected data were not enough to calculate average, the output factors for 15MV photon beam with field size of $5{\times}5cm,\;15{\times}15cm,\;20{\times}20cm\;were\;0.941{\pm}0.008,\;1.032{\pm}0.004,\;1.049{\pm}0.014$. There was seven institutions $e{\times}ceeding$ tolerance when monitor unit values calculated from treatment planning system and manually were compared. The measured average MU values for the machines calibrated at SAD setup were 3 MU and 5 MU higher than the machines calibrated at SSD for 6 MV and 10 MV, respectively except the wedge case. When the wedges were inserted, the MU values to deliver 100 cGy to 5 cm depends on manufactures. When the same wedge angle was used, Siemens machine requires more MUs then Varian machine. Conclusion: In this study, photon beam data are collected and analyzed to provide a baseline value for chocking beam data and the accuracy of dose calculation for a treatment planning system.

• Radiation Oncology Journal
• /
• v.17 no.4
• /
• pp.269-274
• /
• 1999

Purpose : To evaluate the Possibility of decreasing the radiation dose and to determine optimum treatment volume in intracranial germinomas. Materials and Methods : Forty five patients with pathologically-verified or presumed germinomas by a radiosensitivity test who had been treated with radiotherapy (RT) alone between 1971 and 1992 were retrospectively analyzed. The average age was 17.2 years with 68.9$\%$ of the patients being between the ages of 10$\~$20. The male and female ratio was 2.2:1. The locations of the primary tumors were at the pineal regions in 14 patients; the suprasellar regions in 12 patients; and multiple sites in 12 patients. Treatment volumes varied from a small local field (10) to the whole brain (7) or entire neuroaxis irradiation(28). All the cases after 1982 received craniospinal irradiation (CSI). Radiation doses were 41-59 Gy (median 48.5 Gy) to the primary tumor site and 19.5$\~$36 Gy (median 24 Gy) to the neuroaxis. The median follow-up period was 82 months with a range of 2$\~$260 months. Results : All the patients showed complete response after RT. Four patients sufferred from recurrence 14, 65, 76, and 170 months after RT, respectively, and two patients died with intercurrent disease. One of four recurrent cases was salvaged by re-irradiation. Therefore, a 5 and 10 year overall suNival was 95.3$\%$ and 84.7 $\%$ respectively. Five and ten year disease-free survival was 97.6 $\%$ and 88.8 $\%$ respectively. All the recurrences occurred in the patients who received local RT (3/10) or whole brain RT (1/7) with a radiation dose of 48-50 Gy. None of the patients who received CSI suffered recurrence. There was no recurrence among the 15 patients who received $\leq$45 Gy to the primary site and the 18 patients who received $\leq$24 Gy (6 patients received 19.5 Gy) to the neuroaxis. Conclusion : CSI is recommended for the treatment of intracranial germinomas. The radiation dose can be safely decreased to $\leq$45 Gy on a primay tumor site and 19.5 Gy on the spine.

• Restorative Dentistry and Endodontics
• /
• v.25 no.1
• /
• pp.46-55
• /
• 2000

During bonding procedure of composite resin, the prepared cavity can be contaminated by saliva. In this study, marginal microleakage and shear bond strength of a composite resin to primed enamel and dentin treated with artificial saliva(Taliva$^{(R)}$) were evaluated. For the marginal microleakage test, Class V cavities were prepared in the buccal surfaces of fifty molars. The samples were randomly assigned into 5 groups with 10 samples in each group. Control group was applied with a bonding system (Scotchbond$^{TM}$ Multi-Purpose plus) according to manufacture's directions without saliva contamination. Experimental groups were divided into 4 groups and contaminated with artificial saliva for 30 seconds after priming: Experimental 1 group ; artificial saliva was dried with compressed air only, Experimental 2 group ; artificial saliva was rinsed and dried. Experimental 3 group ; cavities were etched with 35% phosphoric acid for 15 seconds after rinsing and drying artificial saliva. Experimental 4 group ; cavities were etched with 35% phosphoric acid for 15 seconds and primer was reapplied after rinsing and drying artificial saliva. All the cavities were applied a bonding agent and filled with a composite resin (Z-100$^{TM}$). Specimens were immersed in 0.5% basic fuschin dye for 24 hours and embedded in transparent acrylic resin and sectioned buccolingually with diamond wheel saw. Four sections were obtained from one specimen. Degree of marginal leakage was scored under stereomicroscope and their scores were averaged from four sections. The data were analyzed by Kruscal-Wallis test and Fisher's LSD. For the shear bond strength test, the buccal or occlusal surfaces of one hundred molar teeth were ground to expose enamel(n=50) or dentin(n=50) using diamond wheel saw and its surface was smoothed with Lapping and Polishing Machine(South Bay Technology Co., U.S.A.). Samples were divided into 5 groups. Treatment of saliva-contaminated enamel and dentin surfaces was same as the marginal microleakage test and composite resin was bonded via a gelatin capsule. All specimens were stored in distilled water for 48 hours. The shear bond strengths were measured by universal testing machine (AGS-1000 4D, Shimaduzu Co., Japan) with a crosshead speed of 5 mm/minute. Failure mode of fracture sites was examined under stereomicroscope. The data were analyzed by ANOVA and Tukey's studentized range test. The results of this study were as follows : 1. Enamel marginal microleakage showed no significant difference among groups. 2. Dentinal marginal microleakages of control, experimental 2 and 4 groups were lower than those of experimental 1 and 3 groups (p<0.05). 3. The shear bond strength to enamel was the highest value in control group (20.03${\pm}$4.47MPa) and the lowest value in experimental 1 group (13.28${\pm}$6.52MPa). There were significant differences between experimental 1 group and other groups (p<0.05). 4. The shear bond strength to dentin was higher in control group (17.87${\pm}$4.02MPa) and experimental 4 group (16.38${\pm}$3.23MPa) than in other groups, its value was low in experimental 1 group (3.95${\pm}$2.51 MPa) and experimental 2 group (6.72${\pm}$2.26MPa)(p<0.05). 5. Failure mode of fractured site on the enamel showed mostly adhesive failures in experimental 1 and 3 groups. 6. Failure mode of fractured site on the dentin did not show adhesive failures in control group, but showed mostly adhesive failure in experimental groups. As a summary of above results, if the primed tooth surface was contaminated with artificial saliva, primer should be reapplied after re-etching it.

• Journal of Radiation Protection and Research
• /
• v.33 no.2
• /
• pp.47-51
• /
• 2008

Objective: This study analyzed errors due to rotation or tilt of the magnetic resonance (MR) imaging indicator during image acquisition for a stereotactic radiosurgery. The error correction procedure of a commercially available stereotactic neurosurgery treatment planning program has been verified. Materials and Methods: Software virtual phantoms were built with stereotactic images generated by a commercial programming language, Interactive Data Language (version 5.5). The thickness of an image slice was 0.5 mm, pixel size was $0.5{\times}0.5mm$, field of view was 256 mm, and image resolution was $512{\times}512$. The images were generated under the DICOM 3.0 standard in order to be used with Leksell GammaPlan$^{(R)}$. For the verification of the rotation error correction function of Leksell GammaPlan$^{(R)}$, 45 measurement points were arranged in five axial planes. On each axial plane, there were nine measurement points along a square of length 100 mm. The center of the square was located on the z-axis and a measurement point was on the z-axis, too. Five axial planes were placed at z=-50.0, -30.0, 0.0, 30.0, 50.0 mm, respectively. The virtual phantom was rotated by $3^{\circ}$ around one of x, y, and z-axis. It was also rotated by $3^{\circ}$ around two axes of x, y, and z-axis, and rotated by $3^{\circ}$ along all three axes. The errors in the position of rotated measurement points were measured with Leksell GammaPlan$^{(R)}$ and the correction function was verified. Results: The image registration errors of the virtual phantom images was $0.1{\pm}0.1mm$ and it was within the requirement of stereotactic images. The maximum theoretical errors in position of measurement points were 2.6 mm for a rotation around one axis, 3.7 mm for a rotation around two axes, and 4.5 mm for a rotation around three axes. The measured errors in position was $0.1{\pm}0.1mm$ for a rotation around single axis, $0.2{\pm}0.2mm$ for double and triple axes. These small errors verified that the rotation error correction function of Leksell GammaPlan$^{(R)}$ is working fine. Conclusion: A virtual phantom was built to verify software functions of stereotactic neurosurgery treatment planning program. The error correction function of a commercial treatment planning program worked within nominal error range. The virtual phantom of this study can be applied in many other fields to verify various functions of treatment planning programs.

• Journal of Gastric Cancer
• /
• v.6 no.3
• /
• pp.146-153
• /
• 2006

Purpose: Gastrointestinal stromal tumorsm (GISTs) are the most common mesenchymal tumors that arise anywhere in the tubular GI tract. The prognosis for GSTIs is important because f GISTs may metastasiwx in the liver or the abdominal cavity in an early stage. For the reason we examined the tumor size, the mitotic number, ki 67, p53, and c-kit mutation as independent prognostic factor for GISTs. Materials and Methods: A retrospective study was conducted in 76 patients who had been re-evaluated for confirmation of diagnosis between Jan 1998 and Dec. 2001. at Catholic University of medicine. Results: There were significant difference between the turner size, mitotic indices, ki 67, c-kit mutations and the 5-years survival rates. Tumor size (${\geq}5\;cm$) and mitotic index (${\geq}5/50\;HPF$) were statistically related to a significantly poor prognosis (P=0.017 and P=0.042, respectively). c-kit mutations in exon 11 were found in 7 cases c-kit mutation was observed more frequently in high risk patients, and there was a significant difference between c-kit mutation and survival (P=0.037). Elevated ki 67 was noted in 34 out of the 76 cases. High risk patients showed elevated ki67 index more frequently and there was significant relation with the survival rate (P=0.0417). Conclusion: We think that tumor size, mitotic index, Ki 67 and c-kit mutation are as independent prognostic factors for GISTs, but more research is needed.