• International Journal of Air-Conditioning and Refrigeration
• /
• 제6권
• /
• pp.148-157
• /
• 1998

This study presents test results of a residential window air-conditioner using R22 and two potential alternative refrigerants, R407C and R410B. A series of performance tests has been carried out for the basic and liquid-suction heat exchange cycles in a psychometric calorimeter test facility. For R407C, the same rotary compressor was used as in the R22 system. However, compressor for the R410B system was modified to provide the similar cooling capacity. The evaporator circuit was changed to get a counter-cross flow heat exchanger to take advantage of zeotropic mixture's temperature glide, and liquid-suction heat exchange cycle was also considered to improve the system performance. Test results were compared with those for the basic R22 system. The modified system with a liquid-suction heat exchanger increased cooling capacity and energy efficiency by up to 5%.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제12권2호
• /
• pp.109-118
• /
• 2008

We present a new version of the first return time test for pseudorandomness. Let $R_n$ be the first return time of initial n-block with overlapping. An algorithm to calculate the probability distribution of the first return time $R_n$ for each starting block is presented and used to test pseudorandom number generators. The standard Z-test for log $R_n$ is applied to test the pseudorandom number generators.

• 한국통계학회:학술대회논문집
• /
• 한국통계학회 2003년도 춘계 학술발표회 논문집
• /
• pp.191-197
• /
• 2003

This paper considers the independence test for two stationary infinite order autoregressive processes. For a test, we follow the empirical process method devised by Hoeffding (1948) and Blum, Kiefer and Rosenblatt (1961), and construct the Cram${\acute{e}}$r-von Mises type test statistics based on the least squares residuals. It is shown that the proposed test statistics behave asymptotically the same as those based on true errors.

• Nuclear Engineering and Technology
• /
• 제41권3호
• /
• pp.347-354
• /
• 2009

Welding is required for a connection between two different components in the nuclear fuel of a pressurized water reactor. This work relies on a mechanical experiment and analytic results to investigate the structural integrity of nuclear fuel in a situation where some components are not welded to each other. A series of lateral vibration tests are performed in a test facility, and the test structures are examined in terms of dynamic behavior. In the tests, the displacement signal at every grid structure that sustains fuel rods is measured and processed to identify the dynamic properties. The fluid-elastic stability of the structure is also analyzed to evaluate susceptibility to a cross flow with an assumed conservative cross flow distribution. The test and analysis results confirm that the structural integrity can be maintained even in the absence of some welding connections.

• 대한임상전기생리학회지
• /
• 제10권1호
• /
• pp.1-5
• /
• 2012

Purpose : In this study, stroke patients' limits of stability and functional reach test and tibialis anterior, gastrocnemius muscle of lower extremity muscle activities to evaluate the correlation. Methods : 30 adult stroke patients to participate in this study. Limits of stability were measured using biorescue, tibialis anterior and gastrocnemius muscle of muscles activities were measured with functional reach test when there was movement. Results : Limits of stability and functional reach test (r=0.753, p<0.01), RMS value of the limits of stability and tibialis anterior muscle (r=0.706, p<0.01), RMS value of the limits of stability and gastrocnemius muscle (r=0.766, p<0.01), RMS value of the functional reach test and tibialis anterior muscle (r=0.835, p<0.01), RMS value of the functional reach test and gastrocnemius muscle (r=0.663, p<0.01), RMS value of the tibialis anterior and gastrocnemius muscle (r=0.816, p<0.01) correlations are shown as statistically significant. Conclusion : The balance and lower extremity muscle activities of stroke patients were studied, and were positively correlated with the RMS value of the limits of stability and functional reach test, tibialis anterior muscle, and gastrocnemius muscle. This study has shown that stroke patients' ankle joint muscle activity can greatly.

• 설비공학논문집
• /
• 제9권4호
• /
• pp.536-544
• /
• 1997

This study presents test results of a residential window system air-conditioner using R22 and two potential alternative refrigerants, R407C and R410B. A series of performance tests was performed for the basic and liquid-suction heat exchange cycle in a psychrometric calorimeter test facility. For R407C, the same rotary compressor was used as in the R22 system. However, compressor for the R410B system was modified to provide the similar cooling capacity. The evaporator circuit was changed to get a counter-cross flow heat exchanger to take advantage of zeotropic mixture's temperature glide, and liquid-line suction-line heat exchange cycle was also considered to improve the performance of the system. Test results were compared to those for the basic R22 system.

• 대한치과보철학회지
• /
• 제39권5호
• /
• pp.556-575
• /
• 2001

For the improvement of denture fitness of changed residual ridge, denture liner can be used. Denture liner should be very stable physically in various environments of the mouth as well as be bonded strongly with denture resin. In this study. the specimens bonded with four kinds of soft denture liner and three kinds of hard denture liner were used to test the physical properties of the liners. All experimental groups were stored in $37{\pm}1^{\circ}C$ distilled water for 24hours, followed by thermocycling between $15^{\circ}C$ and $45^{\circ}C$ with 15 second dwell time. 1000, 2000, 3000 cycles of thermocycling were excuted and physical properties were measured by Instron Universal Testing Machine. The obtained results were as follows : 1. In tensile bond test of sea liners, it was shown that both of $Molloplast-B^{(R)}$ specimens before and after thermocycling had the highest tensile strength, and in case of hard liners, Dura-Liner $II^{(R)}$ specimen had the highest tensile strength before and after thermocycling. Depending on thermocycling, $Soft-Relining^{(R)}$, $Denture-Relining^{(R)}$, $Molloplast-B^{(R)}$, $Coe-Soft^{(R)}$ and $Kooliner^{(R)}$ specimen showed significant difference(p<0.05). 2. In strain test of soft liners, it was shown that $Molloplast-B^{(R)}$ specimen before thermocycling and the $Coe-Soft^{(R)}$ after thermocycling showed highest results, and in case of hard liners, the Dura-Liner $II^{(R)}$ specimen before and after thermocycling had the highest result. Depending on thormocycling, $Denture-Relining^{(R)}$, $Molloplast-B^{(R)}$ and Dura-Liner $II^{(R)}$ specimen showed significant difference(p<0.05). 3. In maximum distance test of soft liners. the $Molloplast-B^{(R)}$ specimen before thermocycling and the $Coe-Soft^{(R)}$ after thermocycling showed highest results. and in case of hard liners, the Dura-Liner $II^{(R)}$ specimen before and after thermocycling showed highest result. Depending on thermocycling, $Denture-Relining^{(R)}$, $Molloplast-B^{(R)}$ specimens showed significant difference(p<0.05). 4. In elasticity test of soft liners, the $Molloplast-B^{(R)}$ specimen before and after thermocycling showed highest result. and in case of hard liners, the Dura-Liner $II^{(R)}$ specimen before thermocycling and the $Tokuso-Rebase^{(R)}$ after thermocycling showed highest results. Depending on thermocycling, $Soft-Relining^{(R)}$ $Molloplast-B^{(R)}$ specimens showed significant difference (p<0.05).

• 한국작물학회지
• /
• 제51권7호
• /
• pp.618-623
• /
• 2006

쌀의 외관 기호도에 영향을 미치는 몇가지 관련 특성을 검토하고 이들의 상호관계를 구명함으로써 쌀 외관품질의 등급화를 위한 기초자료를 확보하고자 국내에서 주로 재배되고 있는 자포니카 44품종 쌀에 대한 외관기호도와 관련 특성을 조사 및 평가하여 얻어진 결과는 다음과 같다. 1. 쌀의 색기호도는 외관품질(r=-0.897) 및 적색도(r=-0.893)와 유의한 부의 상관을 나타내었다. 2. 외관품질(적색도${\times}$황색도)은 색에 의한 쌀 외관의 등급화에 유용하게 활용될 수 있을 것으로 판단되었다. 3. 쌀의 모양에 대한 기호도는 입폭(r=0.527)과 입의 크기(r=0.454)가 유의한 정 상관을 나타내었다. 4. 쌀의 외관에 대한 기호도의 군집분석결과 5개의 그룹으로 분류되었으며 그룹별 품질은 외관품질, 입폭 및 입크기 등에 의해 품질등급화가 가능할 것으로 판단되었다.

• Geomechanics and Engineering
• /
• 제23권1호
• /
• pp.31-38
• /
• 2020

Soil-cement stabilization is a type of ground improvement method which has been used to improve the engineering properties of soil. The unconfined compression test is the commonly used method to evaluate the quality of the stabilized soil due to its simplicity, reliability, rapidity and cost-effectiveness. The main objective of this study was to evaluate the effect of recovered carbon black (rCB) on the strength characteristic of cement-stabilized sand. Various rCB contents and water to cement ratios (w/c) were examined. The unconfined compression test on stabilized sand with different curing times was also conducted for a reconstituted specimen. From the test result, it was found that the compressive strength of cement-stabilized sand increased with the increase of the rCB content up to 3% and the curing time and with the decrease of the w/c ratio, showing that the optimum rCB concentration of the tested stabilized sand was around 3%. In addition, a prediction equation was suggested in this study for cement-stabilized sand with rCB as a function of the w/c ratio and rCB concentration at 14 and 28 days of curing.

• Journal of the Korean Statistical Society
• /
• 제25권4호
• /
• pp.457-469
• /
• 1996

In this paper, we propose a method for an exact test of H : $p_i$ = $r_i$ for all i against K : $p_i$ $\neq$ $r_i$ for some i in an unbalanced random effect linear model, where $p_i$ denotes the ratio of the i-th variance component to the error variance. Then we present a method to test H : $p_i$ $\leq$ r against K : $p_i$> r for some specific i by applying orthogonal projection on the model. We also show that any test statistic that follows an F-distribution on the boundary of the hypotheses is equal to the one given here.