• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 추계학술발표회
• /
• pp.703-704
• /
• 2005

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2004년도 추계학술발표회 발표논문집
• /
• pp.1373-1374
• /
• 2004

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 추계학술발표회
• /
• pp.422-423
• /
• 2005

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.1144-1145
• /
• 2005

• 설비공학논문집
• /
• 제25권8호
• /
• pp.438-442
• /
• 2013

The alternative refrigerant R436B is applied, to assess the application feasibility for a commercial cooling water system. The characteristic stability was verified by Sealed glass tube test and Autoclave test. R436B is chemically stable with the compressor material. The Oil miscibility test shows the usual compressor oil mixed well with R436B. Through the life acceleration test, the cooling performance is maintained. Though slight changes in oil and capillary tube diameter were found, they were within the permitted range. R436B should be applied to commercial cooling water systems as a simple replacement for the usual refrigerant.

• 대한기계학회논문집A
• /
• 제24권12호
• /
• pp.3010-3017
• /
• 2000

For integrity evaluation of cracked or damaged structures, fracture toughness test results in ASTM are widely used. The fracture toughness values of the structures are used as an effective design criterion in nuclear plants and aircraft structures. Sometimes the difference of P-$\delta$ curve trend during the unloading /reloading cycle in the fracture toughness test using partial unloading compliance was observed. The phenomenon as a possible source of error in determining fracture toughness may be caused by the residual stress during unloading work-hardening and bucking of a specimen. Therefore, we evaluate the effect of bucking and compressive residual stress during the K-R and J-R testing using a finite element method.

• 한국전문물리치료학회지
• /
• 제21권3호
• /
• pp.80-88
• /
• 2014

Previous studies have reported that decreased cognitive ability has been consistently associated with significant declines in performance of one or both tasks under a dual-task walking condition. This study examined the relationship between specific cognitive abilities and the dual-task costs (DTCs) of spatio-temporal gait parameters in stroke patients. The spatio-temporal gait parameters were measured among 30 stroke patients while walking with and without a cognitive task (Stroop Word-Color Task) at the study participant's preferred walking speed. Cognitive abilities were measured using Computerized Neuropsychological Testing. Pearson's correlation coefficients (r) were calculated to quantify the associations between the neuropsychological measures and the DTCs in the spatio-temporal gait parameters. Moderate to strong correlations were found between the Auditory Continuous Performance test (ACPT) and the DTCs of the Single Support Time of Non-paretic (r=.37), the Trail Making A (TMA) test and the DTCs of Velocity (r=.71), TMA test and the DTCs of the Step Length of Paretic (r=.37), TMA test and the DTCs of the Step Length Non-paretic (r=.36), the Trail Making B (TMB) test and the DTCs of Velocity (r=.70), the Stroop Word-Color test and the DTCs of Velocity (r=-.40), Visual-span Backward (V-span B) test and the DTCs of Velocity (r=-.41), V-span B test and the DTCs of the Double Support Time of Non-paretic (r=.38), Digit-span Forward test and the DTCs of the Step Time of Non-paretic (r=-.39), and Digit-span Backward test and the DTCs of the Single Support Time of Paretic (r=.36). Especially TMA test and TMB test were found to be more strongly correlated to the DTCs of gait velocity than the other correlations. Understanding these cognitive features will provide guidance for identifying dual- task walking ability.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제9권3호
• /
• pp.233-248
• /
• 2009

PAM(Power Amplifier Module) is the important part of a mobile phone transmitter. It amplifies the strength of signal transmitting from a mobile phone to base stations enough to resist noise or interference. In this paper reliability assessment criteria for the PAM are established in terms of quality certification test and lifetime test. The former quality certification test comprises general performance test and environmental test. Items which pass the test undergo lifetime test which guarantees the extent of mean lifetime with certain confidence.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.616-618
• /
• 2007

This paper describes the mechanical and electrical test on HVDC submarine cable, Flexible Repair Joint and termination for 180kV. This HVDC submarine cable was manufactured using LS cable's unique skill and would be applied the HVDC submarine cable system in korea. The performance test consist of mechanical test and electrical test. The tensile bending test and tensile test was done as the mechanical test and Electrical test is DC voltage and Impulse test. The tensile bending test carried out 6 times(double of specified times) for maximum reliability. The DC test voltage is $\pm$400kV/1hr. We estimate the lower limit of DC breakdown voltage is 600kV. The impulse test voltage is $\pm$800kV/10shots. The type of developed cables is the MI type. Its insulation consist of paper tapes impregnated with a high viscosity oil. The development of new HVDC cable is available for HVDC underground or submarine power transmission. The developed HVDC cable, FRJ and termination have passed the mechanical and electrical test successfully and showed excellent performance.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.173-181
• /
• 2008

Gas turbine engine for aircraft are usually operated at the altitude condition which is quite different from the ground condition. In order to measure the precise performance data at the altitude condition, the engine should be tested at the altitude condition by a real flight test or an altitude simulation test with an altitude test facility. In this paper describes the design of altitude test facility for turbo shaft engine. This facility will be located in test cell #2 at the Korea Aerospace Research Institute. Test Cell #2 will be used for altitude testing engines with mass flow rate up to 40kg/s and inlet temperatures in the range from $-65^{\circ}C$ to $200^{\circ}C$. The existing compressor/exhauster station with heater & cooler system will be used to simulate altitude conditions in Test Cell #2.