• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.7 no.3
• /
• pp.142-146
• /
• 2014

In this paper, an antenna which has quad band in GSM/DCS/PCS/Bluetooth is proposed. This structure is designed with miniaturization for wide band characteristic based on monopole antenna and log-periodic toothed trapezoid patch antenna which has slots. To achieve multi-bandwidth is used the microstrip line on the substrate. An antenna size is $35mm{\times}20mm$ on FR-4(${\varepsilon}r=4.4$) ground substrate of $35mm{\times}75mm{\times}1mm$ size. And proposed antenna is satisfied with impedance bandwidth(VSWR ${\leq}$ 3). The simulated maximum radiation gain is 1.92 dBi, 3.26 dBi, 3.97 dBi at the center frequency of 0.92 GHz, 1.97 GHz, 2.45 GHz, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.6
• /
• pp.706-713
• /
• 2010

In this paper, the small loop antenna with a parasitic loop structure for penta-band mobile phone application is proposed. This antenna is composed of a feed monopole, a radiating loop antenna with a parasitic loop structure and an additional radiating element. The antenna is printed on the very thin flexible substrate to mount on the dielectric carrier with a volume of 40 mm$\times$11 mm$\times$3 mm. The bandwidth of the proposed antenna is 402 MHz(773~1,175 MHz) for low band and 583 MHz(1,622~2,205 MHz) for high band. As a result, the proposed antenna covers the five bands of GSM850, GSM900, DCS1800, PCS1,900 and WCDMA for a 3:1 VSWR. Moreover, the radiation pattern, gain and efficiency are appropriate for mobile handset. Therefore, this antenna is suitable for small sized multi-band mobile handset applications.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.307-312
• /
• 2005

In this paper, the broadband FCMA(Folded Cross Monopole Antenna), which is the cross monopole antenna with the folded element, is presented. To investigate the broadband characteristics of FCMA the VSWR, the gain, and the radiation pattern are calculated in frequency between 1.75 GHz and 2.655 GHz. From the calculated result, it is shown that the presented folded cross monopole antenna has a excellent band characteristics than the existing cross monopole antenna. The presented antenna is conformed as a broadband antenna which can be used for the indoor antenna of PCS, WCDMA, Wibro, and satellite DMB band.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.184-184
• /
• 2008

In this paper, a power divider with a multi-band and broadband are designed and fabricated using an InGaP/GaAs process. The design of this divider is based on multi-band because it is important in the next generation IMT-Advances system. In this design, power divider is fabricated with the frequency of 824 MHz to 894 MHz, 1.8 GHz to 2.2 GHz and 2.3 GHz to 2.4 GH for cellular, personal communication system (PCS) and Wireless Broadband Internet (WiBro). The topology of the designed power divider is based on the multi-section and fabricated using integrated passive device (IPD) library of nanoENS Inc. It is measured using network analyzer.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.4
• /
• pp.9-17
• /
• 1998

BiNbO$_{4}$ ceramics with 0.07wt% V$_{2}$O$_{5}$ and 0.03wt% CuO (BNC3V7) sintered at 900 .deg. C where it is possible for these to be co-fired with ag electronde. Dielectric constant of 44.3 TCF (Thermal Coefficient of resonance Frequency) of 2 ppm/.deg. C and Qxf value 22,000 GHz can be obtained from BNC3V7. the laminatedchip LC filter is indispensible to the minimaturization of PCS (Personal Communication System) terminals. Therefore, multilayer type BPF has been fabricated by screen-printing with silver electrode after tape casting. The simulated characteristics of the fabricated filters sintered at 900.deg. C werecomparedwith the designed ones. for Band Pass Filter widths was similar that ofdesigned ones. For Low Pass Filter (LPF), insertion loss value of band pass widths (2.4 dB) which is a few higher than that of designed (1dB), but characteristization of band pass widths was similar that of designed ones.s.of designed ones.s.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.3 s.118
• /
• pp.233-240
• /
• 2007

In this paper, the broadband cross monopole antenna is presented and the radiation characteristics are investigated. The presented broadband cross monopole antenna is composed of the cross monopole element and the folded short stub, which has a excellent band characteristics more than the existing cross monopole antenna. To conform the broadband characteristics of the presented antenna, the experimental antenna is designed, fabricated, and its radiation characteristics are measured in $1.75\sim2.655\;GHz$. It is shown that the designed antenna has the nondirectional pattern in the horizontal plane, the directional pattern in the vertical plane, VSWR less than 1.5, and gain in $2.17\sim4.87\;dBi$. From these results, the presented antenna is conformed as a broadband indoor antenna which can be used for PCS, WCDMA, Wibro, and satellite DMB band.

• Journal of IKEEE
• /
• v.4 no.2 s.7
• /
• pp.241-248
• /
• 2000

A linear power amplifier is particular emphasized on the CDMA system using a linear modulation scheme, because intermodulation distortion which cause adjacent channel interference and co channel interference is mostly generated in a nonlinear power amplifier. In this paper, a new type of linearization technique proposed. It is presented that balanced MESFET predistortion linearizer added. Experimental result are present for Korea PCS(Personal Communication Service) frequency band. The implemented linearizer is applied to a 30dBm class A power amplifier for simulation Performance. The predistortion linearizer improves the 1dB compression point of the HPA about 2dBm, and intermoudulation distortion about 12.5dBc.

• Journal of the Optical Society of Korea
• /
• v.17 no.3
• /
• pp.262-268
• /
• 2013

We study the focusing properties of a two-dimensional square-lattice photonic crystal (PC) comprising silica and germanium partitioned cylinders in air background. The finite difference time domain (FDTD) method with periodic boundary condition is utilized to calculate the dispersion band diagram and the FDTD method incorporating the perfectly matched layer boundary condition is employed to simulate the image formation. In contrast to the common square PCs in which the negative refraction effect occurs in the first photonic band without negative phase propagation, in our suggested model system, the frequency with negative refraction exists in the second band and in near-infrared region. In this case, the wave propagates with a negative phase velocity and the evanescent waves can be supported. We also discuss the dependency of the image resolution and its location on surface termination, source location, and slab thickness. According to the simulation results, spatial resolution of the proposed PC lens is below the radiation wavelength.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.5 s.108
• /
• pp.451-460
• /
• 2006

We have designed local exposure systems for long-time mice experiments in PCS and cellular frequency band(PCS: 1,762.5 MHz, cellular: 848.5 MHz). The fabricated systems are local exposure systems of carousel type, and 40 mice can be exposed at a time. In order not to give extra stress to the mice ender experiment, the systems were fabricated to meet the environmental conditions such as illumination, ventilation, noise etc. SAR measurement was performed using a temperature probe. Measurements at 3 points in the head of mouse cadaver and solid phantom were made, and it has been confirmed that the measurement results are in good agreement with the simulation results in the real exposure environment. The exposure systems are currently used for long-term mice experiments.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.4 s.107
• /
• pp.335-340
• /
• 2006

In this paper, a rectangular-cavity-type exposure system for in vitro experiments has been developed fur the biological effect studies of radio frequency fields from handhold wireless telephones. It ia fed with a ${\lambda}_g/8$ monopole antennas at the ${\lambda}_g/4$ position of the top plate in order to excite fundamental $TE_{102}$ mode and it allows the uniform exposure of one 8.5 cm(inner diameter) petri dish. SARs inside the exposed medium have been characterized by numerical simulations, using the FDTD method and by experimental dosimetry with fiberoptic temperature probes (model 790, Luxtron Corp.).