• Korean Journal of Food Science and Technology
• /
• v.31 no.3
• /
• pp.619-624
• /
• 1999

This work was to study the potential health food use of germinated colored rice after germinating and drying using microwave under vacuum. Colored rice was soaked in water at $15^{\circ}C$ for 2 days and then germinated at $25^{\circ}C$ for $3{\sim}4\;days$. The germinated colored rice was dried by different drying methods: microwave vacuum drying 1, microwave vacuum drying $2\;(drying{\rightarrow}crushing{\rightarrow}drying)$, hot air drying, vacuum drying and freeze drying. Each drier except freeze drier was set to maintain the sample temperature at $60^{\circ}C$. During microwave vacuum drying 1 or 2, the sample reached $60^{\circ}C$ much faster (within 5 min) and was dried much faster ($2{\sim}3\;hrs$ than the other drying methods. The initial drying rate of microwave vacuum drying was ten times faster than that of hot air drying. The microwave vacuum drying 2 retained the highest ${\alpha}-amylase$ activity, followed by microwave vacuum drying 1, freeze drying, vacuum drying, and hot air drying.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.25 no.4
• /
• pp.297-306
• /
• 2005

This study was conducted to compare and evaluate fermentable and nutritional characteristics of brewery meal-based fermented feedstuffs supplemented with Aspergillus oryzae (AO) and Saccharomyces cerevisiae (SC). Experiments were divided into three treatment groups; fermented feedstuff supplemented with $1\%$ of AO(FFAO), fermented feedstuff supplemented with $1\%$ of SC(FFSC), and fermented feedstuff supplemented with $0.5\%$ of AO and $0.5\%$ of SC(FFAS). For changes of crude protein contents by 48 h fermentation, there were no significant differences among treatments. Ether extract(EE) contents were significantly increased by 48 h fermentation (p<0.05). Neutral detergent fiber(NDF) contents of FFAO, FFSC and FFAS were significantly decreased by 48 h fermentation(p<0.05), but acid detergent fiber(ADF) and acid detergent lignin (ADL) contents were not different. The pH of FFAO and FFAS was decreased more rapidly than that of FFSC(p<0.05), reaching a plateau after 24 h. Alcohol content was increased rapidly until 18 h in FFAO and was increased rapidly until 12 h in FFSC and FFAS, and alcohol content of FFAO, FFSC and FFAS was maintained constantly after 24 h. The ammonia N content of FFAO, FFSC and FFAS was 0.022, 0.073 and $0.040\%$ at 48 h, respectively, and then ammonia N was over twice higher in FFSC than in FFAO and FFAS(p<0.05). Dextrose content was increased until 6 h in FFAO but was rapidly decreased in FFSC and FFAS until 6 h(p<0.05). Lactate content was higher in FFAO and FFAS than in FFSC(p<0.05). Consequently, when we added AO in formulation of fermented feedstuff with brewery meal which moisture content was high, EE, alcohol, and lactate contents were increased, but NDF and ammonia N contents were reduced. Therefore, it is expected that AO will be effective to increase the feed value and the preservation of fermented feedstuff with a high moisture content.

• Journal of Energy Engineering
• /
• v.29 no.1
• /
• pp.85-99
• /
• 2020

This article analyzes the influence of sectoral system of innovation(i.e. technological regime, market demand, networks, and institution) on innovative performances(i.e. product-, process-, organizational-, marketing-, and environmental- innovation) in Korean environmental industry, conducting a multiple regression analysis based on survey data from 201 Korean environmental companies. As the results, product innovation is positively influenced by internal technology accumulation and market demand response, while not affected by external knowledge utilization, market competition, networks among market and non-market agents, government support and regulation. Process innovation is positively influenced by internal technology accumulation, networks among non-market agents and regulation, but not by external knowledge utilization, market demand response, market competition, networks among market agents, and government support. While organizational innovation is positively influenced by internal technology accumulation, external knowledge utilization and regulation, it is not affected by market demand response, market competition, networks among market and non-market agents, and government support. While marketing innovation is positively influenced by internal technology accumulation, networks among non-market agents, and government support, it is not affected by external knowledge utilization, market demand response, market competition, networks among market agents, and regulation. Environmental innovation is positively influenced by external knowledge utilization and regulation, but negatively influenced by market competition. It is not affected by internal technology accumulation, market demand response, networks among market and non-market agents, and government support. Such results suggests the following policy implications. First, it is necessary to expand the sphere of relating markets through the application of convergence technology, new regulations, and overseas markets. Second, reinforcing ecosystems among environmental market agents through demand-linked joint R&D should be revitalized. Third, it is needed to strengthen more supporting policies rather than regulation. This article has the limitation of using the survey data. And further researches on the environmental sectoral system of innovation structure itself will be tried.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.32 no.2 s.57
• /
• pp.105-110
• /
• 2006

This study was to describe the differences in efficacy and effect of herbal extracts by the part and solvent extraction from the medical plants used as materials of oriental herbs cosmetics. And, this study was to apply to the test method of efficacy and effect related to the antioxidation as herbal extracts, complex of actual ingredient, not existing analytical methods of single ingredient. After screening the medical plants with the antioxidative activity primarily and selecting 11 sorts of medical plants to be used by the part in the literature, this study was to confirm the differences through the well-known test methods like DPPH radical scavenging activity test and hydroxyl radical scavenging activity test. For examples, in case of Trachelospermum asiaticum, compared with the aerial part and fruit, the value of DPPH radical scavenging activity test had $25.2 {\pm} 0.2$ and $62.4 {\pm}1.6$ each. It has shown that the value of fruit had 2.4 times higher effect than the one of aerial part. In case of hydroxyl scavenging activity test, it was effective in the fruit, but it has shown that there was no effect on the aerial part. It showed the same phenomena in some other plants. From the result above, this researcher could understand that it needed to consider extracting the medical plants or plants with the active principle by the part. Also, this study was to confirm the differences in effect according to the solvent as it changed the solvent extraction after selecting a plant (Lithospermum erythrorhizon) widely used for medicine and dye. As a result of measuring the actual value of superoxide scavenging activity test, this study was to consider that there were differences by the part or solvent extraction in extracting and using the medical plants as it has shown that the effect differences produced $10{\sim}80%$ according to the solvent. When it was applied to the products, this study has shown that it needed to decrease the possible errors.

• Journal of Korean Society of Forest Science
• /
• v.35 no.1
• /
• pp.39-46
• /
• 1977

In the analysis of variance between population and between individual trees (families), the fluctuation of values of variances due to sample size, (number of family) was analysed by two different designs, i.e. 2-level nested design with equal sample size and randomized complete block design. The variables were seedling heights and root calipers of 1-0 and 1-1 seedlings of Pinus densiflora S. et Z. The details of three natural stands and their progeny characters were presented in previous reports. 1. In nested design analysis. increase of sample size resulted the decrease of F-values among families in general, however, the F-values among populations showen the increasing tendency. The smaller the sample size, the larger the F-values fluctuation was resulted in general. At the point of beyond sample size 10, however, the fluctuation become to be stabilized. The F-value fluctuation seemed to be more in the case of analysis with random sampling method than with sequentially accumulated sampling method. And also such a tendency was more obvious in smaller sample size than in large one. 2. In R.C.B.D. analysis, the sample size to affirm the family variation was smaller than that for population variations.

• The Korean Journal of Financial Management
• /
• v.21 no.2
• /
• pp.99-123
• /
• 2004

We focus in this study on incremental financing decisions and estimate a logit model for the probability a firm will choose a private placement over a public bond issue. We hypothesize that information asymmetry, financial risk, agent cost, and proprietary information may affect a firm's choice between public debt and private placements. We find that as the size of firm increases, the probability of choosing a private placement declines significantly. The age of the firm, however, is not a significant factor affecting the firm's choice between public and privately-placed bond. The coefficients on the firm's leverage and non-investment grade dummy are significantly positive, meaning firms with high financial risk and credit risk select private placements. The findings regarding agency-related variables, PER and Tobin's Q, are somewhat complex. We find significant evidence that firms with high PER prefer private placements to public bonds, suggesting that borrowers with options to engage in asset substitution or underinvestment are more likely to choose private placements. The coefficient of Tobin's Q is negative, but not significant, which weakly support the hold-up hypothesis. When we construct an interaction term on the Tobin's Q with a non-investment rating dummy, however, the Tobin's Q interaction term becomes positive and significant. Thus, high Tobin's Q firms with a speculative rating are significantly more likely to choose a private placement, regardless of the potential hold-up problems. The ratio of R&D to sales, proxy for proprietary information, is positively significant. This result can be interpreted as evidence in favor of a role for proprietary information in the debt sourcing decision process for these firms.

• Journal of Biomedical Engineering Research
• /
• v.21 no.3 s.61
• /
• pp.321-331
• /
• 2000

Multiple 15-hue tests were designed and implemented on a PC in the study so as to quickly and quantitatively evaluate color vision acuity. Difficulty of the test was control)ed by the value of CDBACC (color difference between adjacent color chips) calculated using a CIELAB formula. The multiple 15-hue tests consist of eight of the hue tests (test 3-10) and three of the basic color (red, green, blue) tests (test 11-13). The 15 colors used for the hue tests were specified by the 15 color coordinates that were located at a constant distance (d = 2. 3. 5. 7, 10, 20, 30. 40) from white reference in the CIE chromaticity coordinate system and were separated by a constant color difference (CDBACC = 0.75, 1.1, 1.8. 2.5. 3.5. 7.5. 11, 14) from the adjacent chips. The color coordinates for the 15 chips for the basic color tests were the same as those of the 15 points spaced equally by a constant color difference (6.87 for the green color test. 7.27 for the red color test, 7.86 for the blue color test) from the white reference along the axis of red, green and blue. Thirty normal subjects who were not color blind were taken to undergo the multiple 15-hue tests. It was observed that most of the subjects correctly arranged color chips for the tests with CDBACC greater than 5, whereas no one correctly answered for those with CDBACC less than 2. Rapid changes in the number of the subjects correctly arranged took place when CDBACC of the tests was between 2 and 4.5. In the basic color tests, unlike the hue tests having similar values of CDBACC, it was seen that the subjects arranged color chips even less correctly. It was found that JNCD (just noticeable color difference) - a measure of color vision acuity was about 3 in average for the subjects. The JNCD was chosen as the value of the CDBACC of the test for which about $50\%$ of the subjects failed to successfully arrange color chips. ERCCA (error rate of color chips arrangement) for the test with CDBACC the same as the JNCD was shown to be about $20\%$. It is expected that the multi 15-hue tests implemented on a PC in the study will be an economical tool to quickly and quantitatively evaluate color vision acuity and, accordingly, the tests can be used for early diagnosis to massive potential patients suffering from diseases (ex. diabetes, glaucoma) which may induce changes in color vision acuity.

• Restorative Dentistry and Endodontics
• /
• v.25 no.1
• /
• pp.46-55
• /
• 2000

During bonding procedure of composite resin, the prepared cavity can be contaminated by saliva. In this study, marginal microleakage and shear bond strength of a composite resin to primed enamel and dentin treated with artificial saliva(Taliva$^{(R)}$) were evaluated. For the marginal microleakage test, Class V cavities were prepared in the buccal surfaces of fifty molars. The samples were randomly assigned into 5 groups with 10 samples in each group. Control group was applied with a bonding system (Scotchbond$^{TM}$ Multi-Purpose plus) according to manufacture's directions without saliva contamination. Experimental groups were divided into 4 groups and contaminated with artificial saliva for 30 seconds after priming: Experimental 1 group ; artificial saliva was dried with compressed air only, Experimental 2 group ; artificial saliva was rinsed and dried. Experimental 3 group ; cavities were etched with 35% phosphoric acid for 15 seconds after rinsing and drying artificial saliva. Experimental 4 group ; cavities were etched with 35% phosphoric acid for 15 seconds and primer was reapplied after rinsing and drying artificial saliva. All the cavities were applied a bonding agent and filled with a composite resin (Z-100$^{TM}$). Specimens were immersed in 0.5% basic fuschin dye for 24 hours and embedded in transparent acrylic resin and sectioned buccolingually with diamond wheel saw. Four sections were obtained from one specimen. Degree of marginal leakage was scored under stereomicroscope and their scores were averaged from four sections. The data were analyzed by Kruscal-Wallis test and Fisher's LSD. For the shear bond strength test, the buccal or occlusal surfaces of one hundred molar teeth were ground to expose enamel(n=50) or dentin(n=50) using diamond wheel saw and its surface was smoothed with Lapping and Polishing Machine(South Bay Technology Co., U.S.A.). Samples were divided into 5 groups. Treatment of saliva-contaminated enamel and dentin surfaces was same as the marginal microleakage test and composite resin was bonded via a gelatin capsule. All specimens were stored in distilled water for 48 hours. The shear bond strengths were measured by universal testing machine (AGS-1000 4D, Shimaduzu Co., Japan) with a crosshead speed of 5 mm/minute. Failure mode of fracture sites was examined under stereomicroscope. The data were analyzed by ANOVA and Tukey's studentized range test. The results of this study were as follows : 1. Enamel marginal microleakage showed no significant difference among groups. 2. Dentinal marginal microleakages of control, experimental 2 and 4 groups were lower than those of experimental 1 and 3 groups (p<0.05). 3. The shear bond strength to enamel was the highest value in control group (20.03${\pm}$4.47MPa) and the lowest value in experimental 1 group (13.28${\pm}$6.52MPa). There were significant differences between experimental 1 group and other groups (p<0.05). 4. The shear bond strength to dentin was higher in control group (17.87${\pm}$4.02MPa) and experimental 4 group (16.38${\pm}$3.23MPa) than in other groups, its value was low in experimental 1 group (3.95${\pm}$2.51 MPa) and experimental 2 group (6.72${\pm}$2.26MPa)(p<0.05). 5. Failure mode of fractured site on the enamel showed mostly adhesive failures in experimental 1 and 3 groups. 6. Failure mode of fractured site on the dentin did not show adhesive failures in control group, but showed mostly adhesive failure in experimental groups. As a summary of above results, if the primed tooth surface was contaminated with artificial saliva, primer should be reapplied after re-etching it.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.3
• /
• pp.380-391
• /
• 2015

Objectives: The objective of this study is to assess airborne particulate matter pollution and its effect on health of residents living near Ansim Briquette Fuel Complex and its vicinities. Also, this study measured and analyzed the concentration of TSP, $PM_{10}$, $PM_{2.5}$, and heavy metals which influences on the environmental and respiratory disease in Ansim Briquette Fuel Complex, Daegu, Korea. Methods: In this study, we analyzed various environmental pollutants such as particulate matter and heavy metals from Ansim Briquette Fuel Complex that adversely affected local residents's health. In particular, we verified the concentration distribution and characteristics of exposure for TSP, $PM_{10}$, and $PM_{2.5}$ among particulate matters, and heavy metals(Cd, Cr, Cu, Mn, Ni, Pb, Fe, Zn, and Mg). In that regard, the official test method on air pollution in Korea for analysis of particulate matter and heavy metal in atmosphere were conducted. The large capacity air sampling method by the official test method on air pollution in Korea were applied for sampling of heavy metals in atmosphere. In addition, we evaluated the concentration of seasonal environmental pollutants for each point of residence in Ansim Briquette Fuel Complex and surrounding area. The sampling measured periods for air pollutants were from August 11, 2013 to February 21, 2014. Furthermore, we measured and analyzed the seasonal concentrations(summer, autumn and winter). Results: The average concentration for TSP, $PM_{10}$, and $PM_{2.5}$ by direct influence area at Ansim Briquette Fuel Complex were 1.7, 1.4 and 1.9 times higher than reference region. In analysis results of seasonal concentrations for particulate matter in four direct influence and reference area, concentration levels for winter were generally somewhat higher than concentrations for summer and autumn. The average concentrations for Cd, Cr, Mn, Ni, Pb, Fe, and Zn in direct influence area at Ansim Briquette Fuel Complex were $0.0008{\pm}0.0004{\mu}g/Sm^3$, $0.0141{\pm}0.0163{\mu}g/Sm^3$, $0.0248{\pm}0.0059{\mu}g/Sm^3$, $0.0026{\pm}0.0011{\mu}g/Sm^3$, $0.0272{\pm}0.0084{\mu}g/Sm^3$, $0.4855{\pm}0.1862{\mu}g/Sm^3$, and $0.3068{\pm}0.0631{\mu}g/Sm^3$, respectively. In particularly, the average concentrations for Cd, Cr, Mn, Ni, Pb, Fe, and Zn in direct influence area at Ansim Briquette Fuel Complex were 1.9, 3.6, 2.1, 1.9, 1.4, 2.6, and 1.2 times higher than reference area, respectively. The continuous monitoring and management were required for some heavy metals such as Cr and Ni. Moreover, the average concentration in winter for particulate matter in direct influence area at Ansim Briquette Fuel Complex were generally higher than concentrations in summer and autumn. Also, average concentrations for TSP, $PM_{10}$, and $PM_{2.5}$ were from 1.5 to 2.0 times, 1.2 to 1.8 times, and 1.1 to 2.3 times higher than reference area, respectively. In results for seasonal atmospheric environment, TSP, $PM_{10}$, $PM_{2.5}$, and heavy metal concentrations in direct influence area were higher than reference area. Especially, the concentrations in C station were a high level in comparison with other area. Conclusions: In the results, some particulate matters and heavy metals were relatively high concentration, in order to understand the environmental pollution level and health effect in surrounding area at Ansim Briquette Fuel Complex. The concentration of some heavy metals emitted from direct influence area at Ansim Briquette Fuel Complex were relatively higher than reference area. In particular, average concentration for heavy metals in this study were higher than average concentrations in air quality monitoring station for heavy metal for 7 years in Deagu metropolitan region. Especially, the residents near Ansim Briquette Fuel Complex may be exposed to the pollutants(TSP, $PM_{10}$, $PM_{2.5}$, and heavy metals, etc) emitted from the factories in Ansim Briquette Fuel Complex.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.3
• /
• pp.214-223
• /
• 2013

BACKGROUND: This study focused on the development of an analytical method about dichlorprop (DCPP; 2-(2,4-dichlorophenoxy)propionic acid) which is a plant growth regulator, a synthetic auxin for agricultural commodities. DCPP prevents falling of fruits during their growth periods. However, the overdose of DCPP caused the unwanted maturing time and reduce the safe storage period. If we take fruits with exceeding maximum residue limits, it could be harmful. Therefore, this study presented the analytical method of DCPP in agricultural commodities for the nation-wide pesticide residues monitoring program of the Ministry of Food and Drug Safety. METHODS AND RESULTS: We adopted the analytical method for DCPP in agricultural commodities by gas chromatograph in cooperated with Electron Capture Detector(ECD). Sample extraction and purification by ion-associated partition method were applied, then quantitation was done by GC/ECD with DB-17, a moderate polarity column under the temperature-rising condition with nitrogen as a carrier gas and split-less mode. Standard calibration curve presented linearity with the correlation coefficient ($r^2$) > 0.9998, analysed from 0.1 to 2.0 mg/L concentration. Limit of quantitation in agricultural commodities represents 0.05 mg/kg, and average recoveries ranged from 78.8 to 102.2%. The repeatability of measurements expressed as coefficient of variation (CV %) was less than 9.5% in 0.05, 0.10, and 0.50 mg/kg. CONCLUSION(S): Our newly improved analytical method for DCPP residues in agricultural commodities was applicable to the nation-wide pesticide residues monitoring program with the acceptable level of sensitivity, repeatability and reproducibility.