• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.2
• /
• pp.17-22
• /
• 2012

This paper deals with a precoder design method when the system has imperfect channel information. When MIMO relay system knows the correlation coefficient between perfect channel and imperfect channel information and the variance of the difference between perfect channel and correlated imperfect channel, source and relay precoders are designed to maximize the upper bound of the channel capacity. Also, we investigate channel capacities of the system using proposed precoder and compare with the optimal value according to the correlation and the variance of error channel by simulations.

• Journal of the Korean Society of Costume
• /
• v.67 no.1
• /
• pp.40-55
• /
• 2017

The current new distribution environment provides the consumers to shop at anytime and any places by using mobile appliances. So, the companies which run the offline-store increase the contact point with the consumer by launching not only online-store but also the mobile application (app). Moreover, they are trying to operate the Omni-channel shopping environment. In order for this research to draw the direction of 'the Omni-Channel Strategy', which is about the changed distribution environment of the domestic fashion enterprise, the following steps were performed. First of all, the term related to 'Omni-Channel' is defined. And then, Example of the 'Omni-Channel' strategy and 'O2O' business in the domestic distributior were researched. Lastly, present condition of the 'Omni-Channel' strategy case of the domestic fashion industry was researched. At the result, the online-stores usually have several brands which can not represent their identities. It is suggested that each online-store according to each brand has their own characteristic identity. And The Omni-Channel strategy of the domestic fashion enterprise that is needed the connection point connecting the on-line and off-line. It is able to allure the customer to the off-line-store.

• Journal of information and communication convergence engineering
• /
• v.5 no.3
• /
• pp.185-193
• /
• 2007

This paper evaluates the performance combining space-time transmit diversity (STTD) and an efficient channel estimator (ECE) for wideband code division multiple access (WCDMA) systems in various mobile channels. Using decision variable (DV), we also derive the analytic bit error rate (BER) and mean square error (MSE) for WCDMA applying ECE for STTD schemes. The simulation results show that the ECE performance is superior to the previous works in [1] as because we use additional pilot diversity which is so called secondary common control physical channel (S-CCPCH). The performance in case of the channel estimator using only one-channel or two-channel is worse than that of an ECE as about the maximum 4 dB at BER 1.0E-3 satisfying voice service over Rician fading channel. Our results show that, even with ICE, an ECE algorithm are effective in improving the output SNR and significantly reduce the error floor. In addition, the simulation results investigated in this paper also reveal that WCDMA combining an ECE and the STTD scheme could provide appreciable performance improvements in Rayleigh fading channel.

• Journal of KIISE:Information Networking
• /
• v.29 no.2
• /
• pp.165-173
• /
• 2002

In the static channel assignment scheme for cellular mobile computing environment, each cell has a fixed number of channels and supports a service for a user′s request entering to the cell. This scheme has an advantage of simplicity. However, this scheme has a disadvantage that can′t control far hot cell problem. Therefore, to solve this problem, the "channel borrowing" concept is needed. In this paper, we propose a load balancing(channel borrowing, channel reassignment) approach using genetic algorithm. The purposes of using genetic algorithm in this paper are ${\circled1}$ to find early a cell including an available channel and ${\circled2}$ to decrease a number of probings and ${\circled3}$ to migrate to the cell after searching an available channel near upon optimality. To represent effectiveness of the proposed algorithm, we simulated various experiments.

• The Korean Journal of Physiology and Pharmacology
• /
• v.7 no.6
• /
• pp.341-348
• /
• 2003

Mechanical stimuli to the cardiac myocytes initiate many biochemical and physiological events. Stretch-activated cation channels have been suggested to mediate these events. In this study, cell-attached and inside-out excised-patch clamp methods were used to identify stretch-activated cation channels in adult rat atrial myocytes. Channel openings were increased in cell-attached configuration when negative pressure was applied to the pipette, and also in inside-out excised patches by negative pressure. The channel was not permeable to $Cl^-$, $Na^+$ and $Cs^+$, but selectively permeable to $K^+$, and the degree of activation was dependent on the magnitude of negative pressure (full activation at ${\sim} -50 mmHg). In symmetrical 140 mM KCl, the slope conductance was $51.2{\pm}3$ pS between the potentials of -80 and 0 mV and $55{\pm}6$ pS between 0 and +80 mV (n=5). Glibenclamide ($100{mu}M$) or ATP (2 mM) failed to block the channel openings, indicating that it is not ATP-sensitive $K^+$ channel. Arachidonic acid ($30{mu}M$), which has been shown to activate a $K^+$ channel cooperatively with membrane stretch, did not affect the channel activity. $GdCl_3$ ($100{mu}M$) also did not alter the activity. These results demonstrate that the mechanical stretch in rat atrial myocytes activates a novel $K^+$-selective cation channel, which is not associated with other $K^+$ channels such as ATP-sensitive and arachidonic acid-activated $K^+$ channel.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.87-88
• /
• 2006

Recently, poly-Si TFT-LCD starts to be mass produced using excimer laser annealing (ELA) poly-Si. The main reason for this is the good quality poly-Si and large area uniformity. We report the influence of channel length and width on poly-Si TFTs performance. Transfer characteristics of p-channel poly-Si thin film transistors fabricated on polycrystalline silicon (poly-Si) thin film transistors (TFTs) with various channel lengths and widths of 2-30 ${\mu}m$ has been investigated. In this paper, we analyzed the data of p-type TFTs. We studied threshold voltage ($V_{TH}$), on/off current ratio ($I_{ON}/I_{OFF}$), saturation current ($I_{DSAT}$), and transconductance ($g_m$) of p-channel poly-Si thin film transistors with various channel lengths and widths.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1281-1283
• /
• 2007

In this paper, the properties of n-channel poly-Si TFTs with different channel widths are reported. Poly-Si fabricated using ELA on glass substrates has high quality as a material for applications such as TFT-LCDs. The fabricated n-channel TFTs have a double stack structure of oxide-nitride which acts as an insulator layer. The results show that the small channel TFTs exhibited a lower $V_{TH}$ and the wide channel TFTs had a higher $I_{DSAT}$. The nchannel poly-Si TFTs with an $I_{ON}/I_{OFF}$ value of more than $10^4$ can be reliable switching devices for AMOLED displays.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.113-114
• /
• 2007

Hole mobility characteristics of single surface channel and dual channel Si/SiGe structure are compared, where the former one consists of a relaxed SiGe buffer layer and a tensile strained Si layer on top, and for dual channel structure a compressively strained SiGe layer is inserted between them. Due to the difference of hole mobility enhancement factors of layers between them, hole mobility characteristics with respect to the Si cap thickness shows the opposite tend. Hole mobility increases with thicker Si cap for single channel structure, whereas it decreases with thicker Si cap for dual channel structure.

• Journal of electromagnetic engineering and science
• /
• v.14 no.1
• /
• pp.36-42
• /
• 2014

In this paper, an epsilon near zero (ENZ) tunneling circuit using a double-ridge rectangular waveguide (RWG) is proposed for the miniaturization of a waveguide component. The proposed ENZ channel and is located in the middle of the input-output RWG (IORWG). The ratio of the height to the width of the channel waveguide is very small compared to the IORWG. By properly adjusting the ridge dimensions, the tunneling frequency of the proposed ENZ channel can be lowered to near the cut-off frequency of the IORWG. For the proposed ENZ tunneling circuit, the approach adopted for extracting the effective permittivity, effective permeability;normalized effective wave impedance, and propagation constant from the simulated scattering parameters was explained. The extracted parameters verified that the proposed channel is an ENZ channel and electromagnetic energy is tunneling through the channel. Simulation and measurement results of the fabricated ENZ channel structure agreed.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.1
• /
• pp.63-72
• /
• 2011

In recent years, hot-stamped components are more increasingly used in the automotive industry in order to reduce weight and to improve the strength of vehicles. In hot stamping process, blank is hot formed and press hardened in a tool. However, in hot stamping without cooling channel, temperature of the tool increases gradually in mass production thus cannot meet the critical cooling rate to obtain high strength over 1500MPa. Warpage occurs in the hot stamped component due to non-uniform stress state caused by unbalanced cooling. Therefore, tools should be uniformly as well as rapidly cooled down by the coolant which flows through cooling channel. In this paper, optimal design method of cooling channel to obtain uniform and high strength of the component is proposed. Optimized cooling channel is applied to the hot press V-bending process. As a result of measuring strength, hardness and microstructure of the hot formed parts, it is known that the design methodology of cooling channel is effective to the hot stamping process.