• Korean Journal of Materials Research
• /
• v.5 no.8
• /
• pp.988-996
• /
• 1995

CuInSe$_2$this films as a light absorber layer were fabricated by vacuum evaporation using In$_2$Se$_3$and Cu$_2$Se precursors and their properties were analyzed. Indium selenide films of 0.5${\mu}{\textrm}{m}$ thickness were first deposited by vacuum evaporation of In$_2$Se$_3$ on a Corning 7059 glass substrate. The films deposited at suscepor temperature of 40$0^{\circ}C$ showed a flat surface morphology with densely Packed grain structure. CuInSe$_2$films directly formed by evaporating Cu$_2$Se on the predeposited In$_2$Se$_2$films also showed a very flat surface when the susceptor temperature was $700^{\circ}C$. Cu$_2$Se, a second phase in the CuInSe$_2$film, was removed by evaporating additional In$_2$Se$_3$on the CuInSe$_2$film at $700^{\circ}C$. The grain size of 1.2${\mu}{\textrm}{m}$ thick CuInSe$_2$, film was about 2${\mu}{\textrm}{m}$ and the film had a (112) preferred orientation. As the amount of deposited In$_2$Se$_3$increased, the electrical resistivity of CuInSe$_2$films increased because of the decrease of hole concentration. But the optical band gap was almost constant at the value of 1.04eV, The CuInSe$_2$film grown on a Mo/glass substrate had a similar smooth microstructure compared to that on a glass substrate. A solar cell with ZnO/CdS/CuInSe$_2$/Mo structure may be realized based on the above CuInSe$_2$films.

• Korean Journal of Materials Research
• /
• v.9 no.3
• /
• pp.274-281
• /
• 1999

Usually sputtering and electroless plating methods were used for manufacturing metal-alloy thin film magnetic memory devices. Since electroless plating method has many merits in mass production and product variety com­pared to sputtering method, many researches about electroless plating have been performed in the United State of America and Japan. However, electroless plating method has not been studied frequently in Korea. In these respects the purpose of this research is manufacturing Co-Mn-P alloy thin film on the corning glass 2948 by electroless plating method using sodium hypophosphite as a reductant, and analyzing deposition rate, alloy composition, microstructure, and magnetic characteristics at various pH's and temperatures. For Co-P alloy thin film, the reductive deposition reaction 0$\alpha$urred only in basic condition, not in acidic condition. The deposition rate increased as the pH and temperature increased, and the optimum condition was found at the pH of 10 and the temperature of $80^{\circ}C$. Also magnetic charac­teristics was found to be most excellent at the pH of 9 and the temperature of $70^{\circ}C$, resulting in the coercive force of 8700e and the squareness of 0.78. At this condition, the contents of P was 2.54% and the thickness of the film was $0.216\mu\textrm{m}$. For crystal orientation, we could not observe fcc for $\beta$-Co. On the other hand,(1010), (0002), (1011) orientation of hcp for a-Co was observed. We could confirm the formation of longitudinal magnetization from dominant (1010) and (1011) orientation of Co-P alloy. For Co-Mn-P alloy deposition, coercive force was about 1000e more than that of Co P alloy, but squareness had no difference. For crystal orientation, (l01O) and (lOll) orientation of $\alpha$-Co was dominant as same as that of Co- P alloy. Likewise we could confirm the formation of longitudinal magnetization.

• Atmosphere
• /
• v.24 no.3
• /
• pp.303-315
• /
• 2014

Terrestrial ecosystem plays the important role as carbon sink in the global carbon cycle. Understanding of interactions of terrestrial carbon cycle with climate is important for better prediction of future climate change. In this paper, terrestrial carbon cycle is investigated by Hadley Centre Global Environmental Model, version 2, Carbon Cycle (HadGEM2-CC) that considers vegetation dynamics and an interactive carbon cycle with climate. The simulation for future projection is based on the three (8.5/4.5/2.6) representative concentration pathways (RCPs) from 2006 to 2100 and compared with historical land carbon uptake from 1979 to 2005. Projected changes in ecological features such as production, respiration, net ecosystem exchange and climate condition show similar pattern in three RCPs, while the response amplitude in each RCPs are different. For all RCP scenarios, temperature and precipitation increase with rising of the atmospheric $CO_2$. Such climate conditions are favorable for vegetation growth and extension, causing future increase of terrestrial carbon uptakes in all RCPs. At the end of 21st century, the global average of gross and net primary productions and respiration increase in all RCPs and terrestrial ecosystem remains as carbon sink. This enhancement of land $CO_2$ uptake is attributed by the vegetated area expansion, increasing LAI, and early onset of growing season. After mid-21st century, temperature rising leads to excessive increase of soil respiration than net primary production and thus the terrestrial carbon uptake begins to fall since that time. Regionally the NEE average value of East-Asia ($90^{\circ}E-140^{\circ}E$, $20^{\circ}N{\sim}60^{\circ}N$) area is bigger than that of the same latitude band. In the end-$21^{st}$ the NEE mean values in East-Asia area are $-2.09PgC\;yr^{-1}$, $-1.12PgC\;yr^{-1}$, $-0.47PgC\;yr^{-1}$ and zonal mean NEEs of the same latitude region are $-1.12PgC\;yr^{-1}$, $-0.55PgC\;yr^{-1}$, $-0.17PgC\;yr^{-1}$ for RCP 8.5, 4.5, 2.6.

• Tuberculosis and Respiratory Diseases
• /
• v.41 no.2
• /
• pp.87-96
• /
• 1994

Background : Since tumor necrosis factor was discovered in 1975, TNF has been well known about its cytotoxic effect on tumor cells in vivo and in vitro. According to the recent improvement of molecular biological techinques, it is possible that exogenous TNF gene is transferred to tumor cells and is expressed in theirs. By virtue of TNF gene transfer, we have expected that TNF expressed in TNF-gene-transferred tumor cells would kill tumor cells in vivo without systemic side effect. The expected mechanisms in which antitumor effects of TNF expressed in TNF-gene-transferred tumor cells are working would be as followings. In the first mechanism, TNF expressed in TNF-gene-transferred tumor cells would kill tumor cells around(like homicide). In the second mechanism, TNF expressed in TNF-gene-transferred tumor cells would kill themselves(like suicide). In the third mechanism, TNF expressed in TNF-gene-transferred tumor cells would recruit immune effector cells and kill tumor cells indirectly. In the last mechanism, TNF expressed in TNF-gene-transferred tumor cells would augment cytokine such as interferon-$\gamma$ to kill tumor cells. Among these four mechanisms of antitumor effect, only the second mechanism has not been established yet. Therefore, to elucidate the second mechanism, We performed this study. Method : We transferred TNF-$\alpha$ gene to NCI-H2058, a human mesothelioma cell line and WEHI164, a murine fibrosarcoma cell line by using retroviral vector(pLT12SNTNF). And, We determined by using MTT assay whether TNF expressed in TNF-gene-transferred tumor cell lines would kill themselves like suicide or not. Then, if TNF-gene-transferred tumor cell lines would not suicide themselves, I would know more about the TNF sensitivity of TNF-gene-transferred tumor cell lines to exogenous TNF also by MTT assay. Result : NCI-H2058 and WEHI164 which were sensitive to TNF, became far less sensitive to endogenous and exogenous TNF after being transferred TNF-$\alpha$ gene to. Conclusion : TNF-gene-transfer to NCI-H2058 and WEHI164 gave them resistance to TNF.

• Journal of Life Science
• /
• v.28 no.3
• /
• pp.314-319
• /
• 2018

We analyzed QTLs for alkali-related digestion by using 120 population crossed Cheongcheong and Nagdong derived from anther culture (CNDH). The DNA markers located in the QTLs gene were selected and applied to existing cultivars. As a result of the investigation of the alkali decay degree, brown rice of Cheongcheong and Nagdong was 1.9 and 1.6, respectively, and the CNDH was $3.79{\pm}2.01$, and the distribution of variance was distributed to 7.0-1.0. The milled rice of Cheongcheong and Nagdong was 5.6 and 4.1, respectively. The mean of the CNDH was $4.86{\pm}1.55$, and the distribution of variance was distributed to 7.0-2.0. Variation distribution curves showed continuous variation that was close to non-normal distribution. In the QTLs analysis, qBRA2, qBRA6, and qBRA11 were mapped in 1-2 replications of brown rice. QHRA2-1, qHRA2-2, qHRA2-3, qHRA3, and qHRA8 were mapped in the first replication. QHRA2-1, qHRA2-2, qHRA2-3 and qHRA3 were mapped in the second replicates. And mapped to qHRA5 in 4 replicates. These were found on chromosome 2, 3, 6, 8 and 11, respectively. The phenotypic variations of qBRA2, qBRA6, and qBRA11 on the chromosomes of brown and milled rice were 1-9%. The polymorphism was analyzed for 12 types of the japonica type and six types of the indica type, based on the nine markers found in the QTLs analysis of alkali digestion. Chromosome 11, RM27258, was selected to determine the segregation ratio, which shows the difference in size by the band pattern. The results of this study will be used as basic data for the development of high-quality rice cultivars.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.4
• /
• pp.16-21
• /
• 2017

In this paper, a Small-sized and planer resonator design of Magnetic Resonance - Wireless Power Transfer(MR-WPT) were proposed for practical applications of mobile devices, such as a laptop, a smart-phone and a tablet pc. The proposed MR-WPT system were based on four coil MR-WPT and designed as a transmitter part (Tx) and a receiver part (Rx) both are the same shape with the same loop and resonator. There are four different spiral coil type of resonators with variable of line length, width, gap and turns in $50mm{\times}50mm$ size. The both of top and bottom side of substrate(acrylic; ${\varepsilon}_r=2.56$, tan ${\delta}=0.008$) ere used to generate high inductance and capacitance in limited small volume. Loops were designed on the same plane of resonator to reduce their volume, and there are three different size. The proposed MR-WPT system were fabricated with two acrylic substrate plane of Tx and Rx each, the Rx and Tx loops and resonators were fabricated of copper sheets. There are 12 combinations of 3 loops and 4 resonators, each combination were measured to calculate transfer efficiency and resonance frequency in transfer distance from 1cm to 5cm. The measured results, the highest transfer efficiency was about 70%, and average transfer efficiency was 40%, on the resonance frequency was about 6.78 MHz, which is standard band by A4WP. We proposed small-sized and planer resonator of MR-WPT and showed possibility of mobile applications for small devices.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.253-263
• /
• 2013

Frequency Scanning Interferometry(FSI) system, one of the most promising optical surface measurement techniques, generally results in superior optical performance comparing with other 3-dimensional measuring methods as its hardware structure is fixed in operation and only the light frequency is scanned in a specific spectral band without vertical scanning of the target surface or the objective lens. FSI system collects a set of images of interference fringe by changing the frequency of light source. After that, it transforms intensity data of acquired image into frequency information, and calculates the height profile of target objects with the help of frequency analysis based on Fast Fourier Transform(FFT). However, it still suffers from optical noise on target surfaces and relatively long processing time due to the number of images acquired in frequency scanning phase. 1) a Polarization-based Frequency Scanning Interferometry(PFSI) is proposed for optical noise robustness. It consists of tunable laser for light source, ${\lambda}/4$ plate in front of reference mirror, ${\lambda}/4$ plate in front of target object, polarizing beam splitter, polarizer in front of image sensor, polarizer in front of the fiber coupled light source, ${\lambda}/2$ plate between PBS and polarizer of the light source. Using the proposed system, we can solve the problem of fringe image with low contrast by using polarization technique. Also, we can control light distribution of object beam and reference beam. 2) the signal processing acceleration method is proposed for PFSI, based on parallel processing architecture, which consists of parallel processing hardware and software such as Graphic Processing Unit(GPU) and Compute Unified Device Architecture(CUDA). As a result, the processing time reaches into tact time level of real-time processing. Finally, the proposed system is evaluated in terms of accuracy and processing speed through a series of experiment and the obtained results show the effectiveness of the proposed system and method.

• Journal of Korean Society of Forest Science
• /
• v.51 no.1
• /
• pp.1-21
• /
• 1981

Populus glandulosa and Populus tomentiglandulosa, which were known to be natural hybrids, were examined for morphological, physiological and karyological traits to illucidate its hybridity and taxonomical importance. The results abtained were as follows; 1. Survival rate in rooting of cuttings and grafting was different between the hybrids and their rooting abilities showed incomplete dominance. 2. Their leaf openings showed incomplete dominance. The leaf longevities of P. alba ${\times}$ glandulosa and P. tomentiglandulosa were stronger than the other hybrids. 3. There were differences in resistance to toxicity of $KClO_3$ between the hybrids. 4. Many external leaf characters of the hybrids also showed incomplete dominance. P. tomentiglandulosa was similar in those characters to P. alba ${\times}$ glandulosa while P. glandulosa was similar to hybrids crossed, reciprocally crossed or back-crossed between P. davidiana and P. alba. 5. Their numbers of male flower showed incomplete dominance or hybrid vigor. The numbers of P. tomentiglandulosa were similar to thosa of P. alba ${\times}$ glandulosa while those of P. glandulosa to those of P. alba ${\times}$ davidiana or P. davidiana ${\times}$ alba. 6. Morphology and band color of male catkin bract showed incomplete dominance. Those of P. glandulosa were similar to those of P. alba ${\times}$ davidiana while those of P. tomentiglandulosa to those of. P. alba ${\times}$ glandulosa. 7. There were differences in vascular bundle number and arrangement of petiole between the hybrids. 8. Differences in the anatomical traits of stem did not exist between the hybrids but those in wood fiber size existed. 9. The chromosomes of artificial hybrids, P. glandulosa and P. tomentiglandulosa showed irregular behavior in metaphase I and II. 10. All hybrids including P. glandulosa and P. tomentiglandulosa showed small number of P.M.C. with 19 II but many univalent chromosomes were exhibited in metaphase I. 11. All hybrids including P. glandulosa and P. tomentiglandulosa showed a little abnormal nuclear plates as laggard chromosome and chromosome bridge in anaphase I and II. 12. The frequency of pollen tetrad and fertile pollen was low in most of the hybrids including P. glandulosa and P. tomentiglandulosa.

• Journal of Korean Society of Forest Science
• /
• v.81 no.3
• /
• pp.273-279
• /
• 1992

Protoplasts isolated from leaf mesophyll tissues of Populus koreana ${\times}$ P. nigra var. italica were fused with those of P. euramericana cv. Guardi. Well expended healthy leaves of 5 to 7 week-old-plantlet grown in vitro were used as source materials. Leaves from P. koreana ${\times}$ P. nigra var. italica and P. euramericana cv. Guardi were digested in enzyme solution I (2.0% Cellulase, 1.2% Hemicellulase, 0.4% Macrozyme, 2.0% Driselase, 0.05% Pectolyase ; w/v) and enzyme solution II (1.0% Cellulase, 1.2% Hemicellulase, 0.4% Macrozyme, 2.0% Driselase, 0.05% Pectolyase ; w/v), respectively, The highest frequency of fusion among the protoplasts originated from the two source materials was approximately 21% using 40% PEG or 15% dextran. In addition, fusion frequency was enhanced by incorporating 30mM of $Ca^{2+}$ in eluting solution at pH 10.5. Dividing cells and/or mint-calli were obtained by culturing the fusion products in a liquid 8p-KM medium supplemented with 0.6M sucrose, $0.45{\mu}M$ 2, 4-D, and $0.5{\mu}M$ BA. Shoots were regenerated from the fusion product-derived calli after culture on MS medium containing $5.0{\mu}M$ zeatin. To verify the putative hybrid or cybrid, SDS-PAGE was carried out. From the 24 regenerants, just two plants showed intermediate protein band patterns compared with those of the original source plants.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.1
• /
• pp.25-30
• /
• 1978

Field experiments were conducted on the cropping system soybean-barley-soybean to investigate the effect of phosphorus and wollastonite application, effective application methods of phosphrus, and their residual effect in a typical Jeju island volcanic ash soil when the fertilizers were applied to the first crop of the three crops sequence. The results are summarized as follows. 1. Response of phosphorus was higher for barley than for soybean. The maximum application rate of phosphate was extimated to be 10-20kg/l0a for cultivation of soybean first crop) and 100kg/l0a for barley (second crop). Barley yield under 100kg/l0a of phosphate was double as compared to the no phosphate plot. 2. With application of 100kg/10a phosphate at the sowing time of soybean, the available phosphate in the soil after harvesting of soybean was increased to 175ppm but decreased to 60 ppm by cultivation of barley (second crop.) On the other hand, the phosphate absorption coefficient was 1,146mg/100g after soybean harvest but increased to 1,764mg/100g after barley harvest. 3. High residual effect was found in the plot to which phosphate applied with compost in the sowing band. 4. Response to wollastonite under heavy application of phosphate was high and residual effect was also great. 5. Response of soybean to wollastonite was higher than that of barley. Application of wollastonite increased the yield of all three crops soybean (first crop) by 30%, barley (second crop) by 12% and soybean (third) by 20%, respectively. Highest yield was obtained from the 1,000kg/10a wollastonite treatment for soybean and 500kg/l0a for barley.