• Journal of Korean Society of Forest Science
• /
• v.89 no.3
• /
• pp.405-413
• /
• 2000

This study was conducted to develop an on-line monitoring system for a forest hydrological environment and its meteorological condition, such as temperature, wind direction and speed, rainfall and water level on V-notch, electrical conductivity(EC), potential of hydrogen(PH) by the motor drive sensor unit and measurement with a single-chip microprocessor as controller. These results are summarized as follows ; 1. The monitoring system consists of a signal process unit, motor drive sensor unit, radio modem unit and power supply. 2. The motor drive sensor unit protects the sensor from swift current or freezing and can constantly maintain fixed water level during measurements. 3. This monitoring system can transfer the data by radio modem. Additionally, this system can monitor hydrological conditions in real time. 4. The hardware was made of several modules with an independent CPU. They can be mounted, removed, repaired and added to. Their function can be changed and expanded. 5. These are the result of an accuracy test, the values of temperature, EC and pH measured within an error range of ${\pm}0.2^{\circ}C$, ${\pm}1{\mu}S$ and ${\pm}0.1pH$ respectively. 6. This monitoring system proved to be able to measure various factors for a forest hydrological environment in various experimental stations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8B
• /
• pp.1460-1468
• /
• 2000

The goal of this research is the real-time implementation of MPEG-1 Layer III audio decoder using the fixed-point digital signal processor of TMS320C6201 The main job for this work is twofold: one is to convert floating-point operation in the decoder into fixed-point operation while maintaining the high resolution, and the other is to optimize the program to make it run in real-time with memory size as small as possible. We, especially, devote much time to the descaling module in the decoder for conversion of floating-point operation into fixed-point operation with high accuracy. The inverse modified cosine transform(IMDCT) and synthesis polyphase filter bank modules are optimized in order to reduce the amount of computation and memory size. After the optimization process, in this paper, the implemented decoder uses about 26% of maximum computation capacity of TMS320C6201. The program memory, data ROM, data RAM used in the decoder are about 6.77kwords, 3.13 kwords and 9.94 kwords, respectively. Comparing the PCM output of fixed-point computation with that of floating-point computation, we achieve the signal-to-noise ratio of more than 60 dB. A real-time operation is demonstrated on the PC using the sound I/O and host communication functions in the EVM board.

• Journal of The Korean Association of Information Education
• /
• v.8 no.3
• /
• pp.293-303
• /
• 2004

To follow in change and the development which circumference environment of education are quick even from scene of education students form the structure of knowledge themselves, the place where own lead studying of personal small group studying is emphasized, here upon specialist learning activity there is a wild possibility in the model which is suitable. But, studying of the learning paper was most center mainly the specialist learning activity of existing, it solves a learning problem at unit hour to, the hour was too insufficient to solve and it became plentifully at block time. But, this is to the curriculum operation and or the schedule operation it is when trying to consider the intensive degree of learning the elementary student, a problem point there is. It grasps the strong point and a weak point of specialist learning activity model of existing from the research which consequently, it sees and it applies more efficiently from web base study to establish the instructional strategy for, it composed the modules which strengthen the interaction of learning subject for. Also, unit macro learning and block time learning in order to do to become accomplished at web with studying problem, it will be able to solve inside unit hour in order, specialist teaching-learning system based on the web. It developed, after applied in the electrification S elementary school 5 grades which will reach the result, it analyzed.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.1
• /
• pp.17-28
• /
• 2010

This paper presents a new automatic TFT-LCD image quality optimization system using DSP for the first time. Since conventional manual method depends on experiences of LCD module developers, it is highly labor-intensive and requires several correction steps providing large gamma correction error. The proposed system optimizes automatically gamma adjustment and power setting registers in mobile TFT-LCD driver IC to reduce gamma correction error, adjusting time, and flicker. It contains module-under-test (MUT, TFT-LCD module), PC installed with program, multimedia display tester for measuring luminance and flicker, and control board for interface between PC and TFT-LCD module. We have developed a new algorithm using 6-point programmable matching technique with reference gamma curve and applying automatic power setting sequence. Developed algorithm and program are generally applicable for most of the TFT-LCD modules. It is realized to calibrate gamma values of 1.8, 2.0, 2.2 and 3.0, and reduce flicker level. The control board is designed with DSP and FPGA, and it supports various interfaces such as RGB and CPU. Developed automatic image quality optimization system showed significantly reduced gamma adjusting time, reduced flicker, and much less average gamma error than conventional manual method. We believe that the proposed system is very useful to provide high-quality TFT-LCD and to improve developing process using optimized gamma-curve setting and automatic power setting.

• Journal of the Korean Geographical Society
• /
• v.51 no.2
• /
• pp.235-253
• /
• 2016

China has been developing a new auto industry growth plan since 2004. In line with this initiative, China actively adopted its policy favoring foreign companies' investment which had a competitive edge over their technologies and manufacturing methodologies. To meet this demand in policy and market change, many foreign auto companies and their parts' manufacturers including Korean auto companies joined this stream. Policy change favoring higher technologies applicable in China requested auto companies' swift adaptation to meet the policy requirements by higher technologies with innovation and introduction of those foreign technologies to China. The spatial (excellence) strategy was followed by the increase in its efficiency and competiveness of each region, which were materialized by or in the form of; Firstly, strategic partnership with China auto companies and encouragement of Korea auto parts manufacturing companies to set up its own factories in China. Secondly, modularization and platform sharing strategy by applying enhanced technologies. Thirdly, strategic utilization of China local government's incentive policies. As production management methodology, JIS was adopted all across the board to meet the on-demand market requirements in the manufacturing processes. Auto part manufacturers had been integrated regionally based on forward linkages and modules. As a result, regional-specific auto industry complexes have been made in the places such as Beijing-Hyundai in the north, Dongfeng-Yueda-Kia in the south, common auto parts at central area like Qingdao, and other parts and raw materials in the vicinity of Shanghai.

• 대한공업교육학회지
• /
• v.31 no.2
• /
• pp.177-202
• /
• 2006

The purpose of this study was to determine the present teaching competency level and the educational needs of electricity electronic communication technical teachers. The population was electricity electronic communication technical teachers, 750 teachers were sampled for this study. A survey questionnaire consisted of teaching competencies scale including 3 domains based on Performance-Based Teacher Education Modules. The professional competencies scale consisted of 5-point Likert-type 30 items for them to rate the importance and also to indicate the teaching competency level. A questionnaire was mailed to the sample and 443 returned questionnaires were analyzed after data cleaning. The educational needs of teachers were calculated by using the Borich's needs assessment formula. The findings of this study were as follows. 1) electricity electronic communication technical teachers perceived all the thirty competencies as highly important ones. 2) They perceived that their current teaching competency level was just beyond the ordinary level but was lower than the good level. 3) The highest needs were 'determining learning level & interests of students', 'applying problem solving techniques', 'reconstructing lesson contents', 'establishing lesson objectives'. 4) They have a different level of educational needs on the competencies according to their gender, terminal education level, year of teaching experience, practical work experience, school type(national public school/private school), and school location.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.6
• /
• pp.1-8
• /
• 2020

Communication between system modules is applied using the Modbus protocol in industrial sites including smart factories, industrial drones, building energy management systems, PLCs, ships, trains, and airplanes. The existing Modbus was used for serial communication, but the recent Modbus protocol is used for TCP/IP communication.The Modbus protocol supports RTU, TCP and ASCII, and implements and uses protocols in embedded systems. However, the transmission I/O devices for RTU, TCP, and ASCII-based protocols may differ. For example, RTU and ASCII communications transmit on a serial-based communication protocol, but in some cases, Ethernet TCP/IP transmission is required. In particular, since the C language (object-oriented) is used in embedded systems, the complexity of source code related to I/O registers increases. In this study, we designed software that can logically separate I/O functions from embedded devices, and designed the execution logic of each instance requiring I/O processing through a delegate class instance with Modbus RTU, TCP, and ASCII protocol generation. We designed and experimented with software that can separate communication I/O processing and logical execution logic for each instance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.603-610
• /
• 2021

The purpose of this study was to develop a Youth Future Career Program for adolescents and to look into the effects of the program on the future efficacy. Through the program, adolescents would predict the future, explore alternative futures to solve future problems, find the shape of the future society they want and desire. In addition, they will discover or create future jobs. In this study, the Youth Future Career Program was developed into four modules: Future Understanding, Future Participation, Future-self, and Future Management. Ninety-three students in K University's Gifted Education Center participated in the Future Career Program (62 males and 31 females, 62 middle school students, and 31 high school students). The students responded to 14 questions about the future efficacy of the Youth before and after the program. Statistically significant differences were observed in 8 out of 14 questions (p<.05). In particular, the abilities of the participants were improved as follows: to apply newly learned things to society, to evaluate the current problems, to develop critical thinking to solve the problem, and to communicate with members of society.

• Geophysics and Geophysical Exploration
• /
• v.25 no.3
• /
• pp.129-139
• /
• 2022

Analog-based streamers for ultra-high-resolution seismic surveys are capable of additional noise ingress in water, but the specifications cannot be expanded through interconnections. Foreign-produced digital streamers have been introduced and used primarily at domestic research institutes; however, the cost is high and smooth maintenance is challenging. This study investigates the localization of ultra-high-resolution digital streamers capable of high-resolution imaging of a geological structure. A digital streamer capable of 24-bit, 10 kHz digital sampling of up to 64 channel data was developed through research and development. Various quantitative specifications of the system were designed and developed close to the benchmark model, Geometrics' GeoEel streamer, and the number of modules that make up the system was drastically reduced, reducing development costs and making it easier to use. The field applicability of the developed streamer system was evaluated in an in situ experiment conducted in the waters around the Port of Yeong-il Bay in Pohang in April 2022.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.2
• /
• pp.91-111
• /
• 2024

Most of utility cable tunnels are constructed utilizing shield TBM as part of the underground transmission line project. The TBM chamber is the only space inside the tunnel that encounters rock and soil, and is the place with the highest frequency of accident exposure, such as collapse and collision accidents. Since there is currently no way to measure the disc cutter wear from outside the chamber, frequent inspection by workers is essential. Accordingly, in this study, in order to prevent safety accidents inside the TBM chamber and expect the effect of shortening the construction period by reducing the number of chamber openings, the concept of disk cutter wear measurement technology was established and a prototype was produced. By considering prior technology and determining that magnetic sensors are most suitable for the excavation environment, wear measurement sensor package were developed integrating magnetic sensors, wireless communication modules, power supply, external casing, and monitoring systems. To verify the performance of the prototype in an actual excavation environment, a full-scale tunnelling test was performed using a 3.6 m EPB shield TBM. Based on the full-scale tests, five prototypes were operated normally among eight prototypes. It was analyzed that sensor measurement, wireless communication, and durability performance were secured within a maximum thrust of 3,000 kN and a rotation speed of 1.5 RPM.