• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.4
• /
• pp.393-399
• /
• 2008

The reduction of the Vehicle interior noise has been the main interest of NVH engineers. The driver's perception on the vehicle noise is affected largely by psychoacoustic characteristic of the noise as well as the SPL. The previous methods to evaluation of the SQ about vehicle interior noise are linear regression analysis of subjective SQ metrics by statistics and the estimation of the subjective SQ values by neural network. But these are so depended on jury test very much that they result in many difficulties. So, to reduce jury test weight, we suggested a new method using Mahalanobis distance for SQ evaluation. And, optimal characteristic values influenced on the result of the SQ evaluation were derived by signal to noise ratio(SN ratio) of the Taguchi method. Finally, the new method to evaluate SQ is constructed using Mahalanobis-Taguchi system(MTS). Furthermore, the MTS method for SQ evaluation was compared by the result of SQ grade table at the previous study and their virtues and faults introduced.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.683-688
• /
• 2012

Driver's feeling is variously affected by lots of components such as engine, frame, wheels, and seats during the operation of automobiles. The main objective of this research is to identify the correlation between subjective evaluation and vibration metrics that was set by ISO to investigate development of the car vibration quality index using multiple linear regressions (MLR). A previous research related with automotive vibration quality used the method of calculating acceleration values of the point of a seat, a seat back, foot as RMS for objective evaluation. The automotive comfort is determined by RMS values. In comparison with the previous research, this study includes not only the vibration metrics, but also subjective values by jury evaluation. By indentifying the correlation between subjective evaluation and vibration metrics, the automotive vibration quality index is developed through MLR. Based on the results of this study, the proposed the automotive vibration quality index which developed through MLR will be helpful to obtain objective and reliable automotive comfort values.

• Journal of Arbitration Studies
• /
• v.21 no.3
• /
• pp.55-87
• /
• 2011

This paper is to illustrate a variety of court-annexed ADR programs and vindicate its implications of court-annexed ADR in United States. It has been almost three decades since Frank Sender articulated his vision of the multi-door courthouse. The court-annexed ADR originated from the concept of multi-door court house. Professor Sander argued that the court must transform from the court that provides litigation, only one type of dispute resolution, to the multi-door courthouse which provides a variety of dispute resolution methods including a number of ADR programs. The types of court-annexed ADR on which this paper focus are court-annexed mediation, court-annexed arbitration, mini trial, early neutral evaluation(ENE), summary jury trial, rent-a-judge, and med-arb in United States. The findings of this paper is as follows. First, the ADR movement is the irreversible and dominant phenomenon in the US court. The motivation of incorporating ADR into court is to reduce the cost of court to handle the civil disputes and to eliminate the delay of litigation process in the court. At the same time, a couple of studies of ADR revealed that the ADR program satisfied users of ADR. Second, the landscape of ADR has not been fixed. In 1970's, the court-annexed arbitration has been popular. In 1980's, the diverse kinds of ADR programs were introduced into the federal court as well as state courts, such as mini trial, early neutral evaluation(ENE), summary jury trial, and court-annexed mediation. But in 2000s, the court-annexed mediation has been the dominant type of ADR in United States. Third, the each type of ADR program has its own place for the dispute resolution. Since Korean society enters into the stage in which diverse kind of disputes occur in the areas of environment, construction, medicare, etc, it is desirable to take into consideration of the introduction of ADR to dispute resolution in Korea.

• Korean Journal of Culture and Social Issue
• /
• v.21 no.3
• /
• pp.497-510
• /
• 2015

The jury instruction consists of a set of legal rules and provides a guide for jurors to interpret evidence and the legal standard of a proof beyond reasonable doubt. Jury instructions are usually given after the closing arguments (at the end of the trial). But some research has shown that jury instruction provided before the evidence may have an impact on verdict. The present study was to determine the cognitive process caused by early instruction: (1) Early instruction may influence the verdict by upwardly adjusting the threshold for the decision to convict; (2) early instruction may influence the verdict through evaluations of the probative values of evidence; (3) Or both. 187 people older than 20 years of age participated in the on-line survey. With a trial scenario, one independent variable, Instruction Procedure, was manipulated in three levels: before-and-after the evidence procedure, after-only evidence procedure, and no-instruction procedure. The instruction procedure conditions did not show any difference in the evaluation of the probative values of evidence. On the other hand, before-and-after condition showed the lowest rate of guilty verdict and the highest probability of guilt for the defendant in the scenario. This latter result clearly suggested that the instruction procedure affects the decision threshold. Specifically, instruction provided twice, once before and again after the evidence, may upwardly shift the threshold for the decision to convict.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1191-1196
• /
• 2007

This research presents a laboratory study about an annoyance of impulsive sound caused by construction site(breaker and blasting). The sources are sampled from outdoor noise and their levels range from 40 to 75 dB at the interval of 5dB. The noise unit is based on A-weighted sound exposure level (ASEL; $L_{AE}$). To make equal ASEL of outdoor noise, finite impulse response (FIR) filter is applied to the originally sampled source to include the effect of distance attenuation. The evaluation method of jury test adopted a Semantic Difference Method (SDM). In the result of the Jury test for impulsive noise, the annoyance response of blasting noise was higher than that of breaker noise.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.714-720
• /
• 2008

This research presents a laboratory study about an subjective response of impulsive sound caused by leisure shooting. The sources are sampled from outdoor noise and their levels range from 40 to 75 dB at the interval of 5dB. The noise unit is based on A-weighted sound exposure level (ASEL; $L_{AE}$). To make equal ASEL of outdoor noise, finite impulse response (FIR) filter is applied to the originally sampled source to include the effect of distance attenuation. The evaluation method of the jury test adopted a Semantic Difference(SD) Method. In the result of the jury test for impulsive noise, the mean response rating expressed a linear relation and %HA(percent highly annoyed) displayed a exponential growth relation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.543-548
• /
• 2002

Nowadays since the customers of HDD's are interested in their noise levels in addition to their primary performances such as their average access time, capacity, HDD manufacturers make efforts on reducing the noise. The works to reduce noise are usually based on the measurable physical quantities such as SPL or acoustic intensity level. However, since the HDD noise is Judged by human beings, the basis of noise reduction should be human sensations. In this paper, the noise levels of various HDD's are evaluated by the human jury test to find a relationship between the physical quantities used for noise control and the human sensations of noise. Discrepancies are found in the judgments by the human beings and by the physical quantities. The loudness level, a psychoacoustic variable, is used to solve the discrepancy.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.184-185
• /
• 2009

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.598-599
• /
• 2010

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.4
• /
• pp.318-327
• /
• 2012

The operating sound radiated from a laser printer includes tonal noise components caused by the rotating mechanical parts such as gear, shaft, motor, fan, etc. The negative effects of the tonal noise components need to be considered in the process of developing a sound quality index for the quantitative evaluation of the emotional satisfaction in terms of psycho-acoustics. However, in a previous paper, it was confirmed that the Aures tonality did not have enough correlation with the results of jury evaluation. The sound quality index based on loudness, articulation index, fluctuation strength has a little problem in considering the effects of rotating mechanical parts on the sound quality. In this paper, to solve the tonality evaluation problem, the calculation algorithm of Aures tonality was investigated in detail to find the cause of decreasing the correlation. The new tonality evaluation model was proposed by modifying and optimizing the masking effect, loudness ratio, and shape of weighting curve based on the basic algorithm of Aures tonality, and applied to two kinds of operating sound groups in order to verify the usefulness of proposed model. As a result, it is confirmed that the proposed tonality evaluation model has enough correlation and usefulness for expressing the tonalness in the operating sounds of laser printers. In the following paper, this results will be used to model the sound quality index as the input data by using the classification algorithm.