• International Journal of Aeronautical and Space Sciences
• /
• 제12권4호
• /
• pp.305-317
• /
• 2011

This paper presents an overview on flutter boundary prediction in tests which is principally based on a system stability measure, named Jury's stability criterion, defined in the discrete-time domain, accompanied with the use of autoregressive moving-average (AR-MA) representation of a sampled sequence of wing responses excited by continuous air turbulences. Stability parameters applicable to two-, three- and multi-mode systems, that is, the flutter margin for discrete-time systems derived from Jury's criterion are also described. Actual applications of these measures to flutter tests performed in subsonic, transonic and supersonic wind tunnels, not only stationary flutter tests but also a nonstationary one in which the dynamic pressure increased in a fixed rate, are presented. An extension of the concept of nonstationary process approach to an analysis of flutter prediction of a morphing wing for which the instability takes place during the process of structural morphing will also be mentioned. Another extension of analytical approach to a multi-mode aeroelastic system is presented, too. Comparisons between the prediction based on the digital techniques mentioned above and the traditional damping method are given. A future possible application of the system stability approach to flight test will be finally discussed.

• 한국소음진동공학회논문집
• /
• 제22권6호
• /
• pp.550-555
• /
• 2012

Among the various elements affecting a customer's evaluation of automobile quality, buzz, squeak and rattle(BSR) have been considered to be major factors. In most vehicle manufacturers, the BSR problems are solved by find-fix method with the vehicle road test, mainly due to various excitation sources, complex generation mechanism and subjective response. To systematically tackle the BSR problems in early stage of the vehicle development cycle, these difficulties should be resolved. The aim of the present paper is to characterize the sound quality property of BSR noise that can be used to assess the subjective responses to BSR. The four sound metrics from Zwicker's sound quality parameter are computed for the signals recorded for eight BSR noise source regions localized by using the acoustic-field visualized results. Then, the jury test of BSR noise are performed. On the basis of the computed sound metrics and jury test result is evaluated to represent the harshness of BSR noise. It is expected that the developed BSR measuring system and sound quality properties can be used to reduce the automotive interior BSR noise in terms of subjective levels as well as objective levels.

• 한국심리학회지:법
• /
• 제11권3호
• /
• pp.329-347
• /
• 2020

사람들은 불확실한 상황에서 판단을 내릴 때 외부에서 주어진 정보의 영향을 받아 그 정보의 근사치로 판단을 내리는 경향이 있으며 이를 정박효과(anchoring effect)라고 한다. 본 연구에서는 배심원들이 사법적 의사결정을 내릴 때 나타나는 정박효과를 연구 문제로 설정하였다. 사법적 의사결정 상황에서는 검사구형량이 정박점으로 작용하여 최종 판결되는 양형이 검사구형량과 유사해지는 현상이 나타난다. 본 연구는 배심원 자격이 있는 만 20세 이상의 대학생들을 대상으로 진행되었다. 연구 1에서는 범죄사건의 경중과 정박크기에 따른 정박효과의 차이를 검증하였다. 그 결과 중범죄사건에서 경범죄사건에 비해 정박효과가 더 강하게 나타났다. 또한 경범죄사건의 저정박 조건에서 고정박 조건에 비해 정박효과가 더 강하게 나타났다. 연구 2에서는 정서상태에 따라 정박효과가 달라짐을 검증하였다. 그 결과 분노정서를 느낄 때 슬픔정서를 느낄 때보다 정박효과가 강하게 나타났다. 마지막으로 정박효과를 약화시키는 방안에 대한 연구 3에서는, 정박효과의 접근가능성 모델이 활성화되는 것을 방지할 때 정박효과가 유의미하게 감소하는 것으로 나타났다. 본 연구의 결과들은 배심원의 사법적 의사결정과정에서 나타나는 정박효과와 관련된 문제들을 파악하고 해결하는 데 기여할 수 있을 것이다.

• 대한가정학회지
• /
• 제33권4호
• /
• pp.235-249
• /
• 1995

The first purpose of this study was to review literatures on marital intimacy. The second purpose was to develop a theory-derived scale to measure marital intimacy. From an original lists of 32 items developed from literatures, the survey was practiced. The data were collected from 344 married adults who had been married more than 5 years. Through this process, a final lists of 19 item scale that were covering 4 different aspects of affectional, sexual, committed, cognitive marital intimacy yielded. reliability estimate assessed by Cronbach's coefficient is .903. Content Validity was evidenced by jury logical opinions. Construct Validity was tested in relation to Spanier's DAS scale.

• 산업기술연구
• /
• 제5권
• /
• pp.27-36
• /
• 1985

마이크로 컴퓨터로 실현(實現)되는 디지탈 필터는 유한어장효과(有限語張效果)에 기인(基因)한 양자화(量子化)(quantization)와 잉여현상(overflow) 때문에, 이상적(理想的)인 선형(線型)필터도 비선형(非線型) 특성(特性)을 나타내어 Limit Cycle과 같은 오차의 원인이 된다. 본(本) 논문(論文)에서는 수학행렬(行列)의 안정(安定)성질을 이용한 Norm-Lyapunov 함수를 이용하여, 디지탈 필터의 안정도를 해석하였다. 잉여현상이 없는 경우에는 Jury-Lee 판별법을 적용하여 전자(前者)와 비교하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 춘계학술대회 논문집
• /
• pp.750-751
• /
• 2010

• 대한전기학회논문지
• /
• 제34권11호
• /
• pp.430-435
• /
• 1985

Using the constructive algorithm proposed by Brayton and Tong, we analyze the stability of a modified coupled-form digital filter with quantization and overflow nonlinearities, and find the regions in the parameter plane where the filter is globally asymptotically stable. In these regions, the absence of zero-input limit cycles is ensured. This constructive algorithm gives less conservative stability results than the application of Jury-Lee stability criterion does.

• 한국소음진동공학회논문집
• /
• 제22권4호
• /
• pp.318-327
• /
• 2012

The operating sound radiated from a laser printer includes tonal noise components caused by the rotating mechanical parts such as gear, shaft, motor, fan, etc. The negative effects of the tonal noise components need to be considered in the process of developing a sound quality index for the quantitative evaluation of the emotional satisfaction in terms of psycho-acoustics. However, in a previous paper, it was confirmed that the Aures tonality did not have enough correlation with the results of jury evaluation. The sound quality index based on loudness, articulation index, fluctuation strength has a little problem in considering the effects of rotating mechanical parts on the sound quality. In this paper, to solve the tonality evaluation problem, the calculation algorithm of Aures tonality was investigated in detail to find the cause of decreasing the correlation. The new tonality evaluation model was proposed by modifying and optimizing the masking effect, loudness ratio, and shape of weighting curve based on the basic algorithm of Aures tonality, and applied to two kinds of operating sound groups in order to verify the usefulness of proposed model. As a result, it is confirmed that the proposed tonality evaluation model has enough correlation and usefulness for expressing the tonalness in the operating sounds of laser printers. In the following paper, this results will be used to model the sound quality index as the input data by using the classification algorithm.

• 대한기계학회논문집A
• /
• 제34권12호
• /
• pp.1871-1876
• /
• 2010

사람이 소리를 듣는 것은 다분히 감정적이고 주관적으로 이루어진다. 따라서 소음 측정의 척도로 주로 사용되는 dB(A)와 같은 청감을 고려한 수치로 표현하기 어렵기 때문에 때와 장소, 차량에 따라 주관적이고 사람의 감정에 맞는 주관적 척도가 요구된다. 즉, 평가하고자 하는 음질인자 항목들은 독립적 관계가 아닌 서로 상관관계의 특성을 고려하여 음질 평가를 수행해야 한다. 그러므로 인간의 청감에 가깝고 정확한 음질 평가를 위해서는 음질인자 별 다변량 분석이 필요하다. 본 연구에서는 차량 주행 소음을 대상으로 특성인자간 상관관계를 고려해 시스템을 분석할 수 있는 마할라노비스 거리(Mahalanobis distance,MD)를 통해 음질 인덱스를 구축하고자 한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.447-452
• /
• 2012

Among the various elements affecting a customer's evaluation of automobile quality, buzz, squeak and rattle (BSR) are considered to be major factors. In most vehicle manufacturers, the BSR problems are solved by find-fix method with the vehicle road test, mainly due to various excitation sources, complex generation mechanism and subjective response. The aim of this paper is to develop the integrated experimental method to systematically tackle the BSR problems in early stage of the vehicle development cycle by resolving these difficulties. To achieve this aim, the developed experimental method ought to include the following requirements: to find and fix the BSR problem for modules instead of a full vehicle in order to tackle the problem in the early stage of the vehicle development cycle; to develop the exciter system including the zig and road-input-signal reproducing algorithm; to automatically localize the source region of BSR; to develop sound quality index that can be used to assess the subjective responses to BSR. Also, the BSR sound quality indexes based on the Zwicker's sound quality parameters using a multiple regression analysis. The four sound metrics from Zwicker's sound quality parameter are computed for the signals recorded for eight BSR noise source regions localized by using the acoustic-field visualized results. Then, the jury test of BSR noise are performed for participants. On a basis of the computed sound metrics and jury test result, sound quality index is developed to represent the harsh of BSR noise. It is expected that the developed BSR detection system and sound quality indexes can be used to reduce the automotive interior BSR noise in terms of subjective levels as well as objective levels.