• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.286-289
• /
• 2003

In the case of high voltage devices, junction termination plays an important role in determining the breakdown voltage of the device. The mesa junction termination has been demonstrated to yield nearly ideal breakdown voltage for 6H-SiC p-n junctions. However, such an approach may not be attractive because of the nonplanar surface, which is difficult to passivate. Moreover, In case of 4H-SiC, ideal breakdown voltage could not be achieved using mesa junction termination. For 4H-SiC planar junction termination technique is more useful one rather than mesa junction termination. In this paper, breakdown characteristics of the 4H-SiC device with planar junction termination, such as FLR(Field Limiting Ring), FP(Field Plate) and JTE(Junction Termination Extension), is presented. In the case of the FLR, breakdown voltage of 1800V is obtained. And breakdown voltage of 1000V and 1150V is also obtained for the case of FP and JTE case, respectively.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권6호
• /
• pp.257-260
• /
• 2003

We have proposed the junction termination structure of IGBT (Insulated Gate Bipolar Transistor) by employing trench and FLR (Field Limiting Ring), which decrease the junction termination area at the same breakdown voltage. Our proposed junction termination structure, trench FLR is verified by numerical simulator MEDICI. In 600V rated device, the junction termination area is decreased 20% compared with that of the conventional FLR structure. The breakdown voltage of trench FLR with 4 trenches is 768 V, 99 % of ideal parallel-plane junction(1-D) $BV_ceo$.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권6호
• /
• pp.300-304
• /
• 2004

We have proposed the junction termination design employing shallow trench filled with silicon dioxide and field limiting ring (FLR). We have designed trenches between P+ FLRs to decrease the junction termination radius without sacrificing the breakdown voltage characteristics. We have successfully fabricated and measured improved breakdown voltage characteristics of the Proposed device for 1200 V-class applications. The junction termination radius of the proposed device has decreased by 15%-21% compared with that of the conventional FLR at the identical breakdown voltage. The junction termination area of the proposed device has decreased by 37.5% compared with that of the conventional FLR. The breakdown voltage of the proposed device employing 7 trenches was 1156 V, which was 80% of the ideal parallel-plane .junction breakdown voltage.

• 전기전자학회논문지
• /
• 제22권3호
• /
• pp.565-569
• /
• 2018

For the conventional power MOSFET (metal-oxide semiconductor field-effect transistor) device structure, there exists a tradeoff relationship between specific on-state resistance (Ron,sp) and breakdown voltage (BV). In order to overcome this tradeoff, a super-junction (SJ) trench MOSFET (TMOSFET) structure with uniform or non-uniform doping concentration, which decreases linearly in the vertical direction from the N drift region at the bottom to the channel at the top, for an optimal design is suggested in this paper. The on-state resistance of $0.96m{\Omega}-cm2$ at the SJ TMOSFET is much less than that at the conventional power MOSFET under the same breakdown voltage of 100V. A design methodology for the edge termination is proposed to achieve the same breakdown voltage and on-state resistance as the main body of the super-junction TMOSFET by using of the SILVACO TCAD 2D device simulator, Atlas.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1337-1339
• /
• 1998

The trench termination scheme is introduced for high voltage devices. The curvature of the depletion region at field limiting ring is critical factor to determine the breakdown voltage. The smooth curvature of the depletion junction alleviate the electric field crowding effect around this region. In the trench field limiting ring, the radius of the depletion region is smaller than conventional field limiting ring, but the distance between every trench is spaced small enough to punchthrough before initiation of local breakdown. The trench field limiting ring on silicon can ne formed by RIE followed by oxidation on side wall surface of the trench, and polysilicon filling. The combined termination of this trench floating field ring and field plate have been designed and analyzed. The breakdown simulation by 2-dimensional TCAD shows that the cylindrical junction breakdown voltage for substrate doping might be 99 percent of the ideal breakdwon voltage for substrate doping concentration of $3\times10^{14}cm^{-3}$ with about $100{\mu}m$ of lateral termination width.

• 전기전자학회논문지
• /
• 제11권4호
• /
• pp.235-238
• /
• 2007

2차원 소자 시뮬레이터인 TMA 메디치를 이용하여 필드링와 깊은 접합 필드링에 대해 연구하였다. 이온 주입될 위치를 미리 트랜치 식각을 시킴으로써 항복전압 특성을 향상시킬 수 있었다. 시뮬레이션 결과 기존 필드링의 항복전압대비 깊은 접합 필드링 항복전압은 약 30%의 증가를 보였다. 깊은 접합 필드링은 같은 면적을 차지하는 조건하에서 설계 및 제작이 비교적 용이하고, 표면 전하의 영향도 적은 것으로 나타났다. 본 논문에서는 여러 분석을 통해 깊은 접합 필드링의 향상된 특성을 논하였다.

• 한국전기전자재료학회논문지
• /
• 제25권4호
• /
• pp.276-281
• /
• 2012

Power semiconductor devices are widely used as high voltage applications to inverters and motor drivers, etc. The blocking voltage is one of the most important parameters for power semiconductor devices. Generally most of field effect concentrations shows on the edge of power devices. Can be improve the breakdown characteristic using edge termination technology. In this paper, considering the variables that affect the breakdown voltage and optimization of parameters result for 600 V Super Junction MOSFET Field ring.

• 전기전자학회논문지
• /
• 제19권4호
• /
• pp.491-499
• /
• 2015

Silicon Carbide(SiC)는 높은 열전도도와 넓은 밴드갭 에너지로 인해 고온과 고전압 소자로 사용하는데 큰 장점을 가지고 있는 물질이다. SiC를 이용하여 전력반도체소자를 제작할 경우, 소자가 목표 전압을 충분히 견딜 수 있도록 Edge Termination 기법을 적용하여야한다. Edge Termination 기법에는 여러 가지 방안이 제안되어왔는데, SiC 소자에 가장 적합한 기법은 Junction Termination Extension (JTE)이다. 본 논문에서는 각 JTE 구조별 도핑 농도와 Passivation Oxide Charge 변화에 따른 항복전압의 변화를 살펴보았다. 결과적으로 Single Zone JTE (SZ-JTE)는 1D 시뮬레이션 값의 98.24%, Double Zone JTE (DZ-JTE)는 99.02%, Multiple-Floating-Zone JTE (MFZ-JTE)는 98.98%, Space-Modulated JTE (SM-JTE)는 99.22%의 최대 항복전압을 나타내었고, JTE 도핑 농도 변화에 따른 최대 항복전압의 민감도는 MFZ-JTE가 가장 낮은 반면 SZ-JTE가 가장 높았다. 또한 Passivation Oxide 층의 전하로 인해 소자의 항복전압의 변화를 살펴보았는데, 이에 대한 민감도 역시 MFZ-JTE가 가장 낮았으며 SZ-JTE가 가장 높았다. 결과적으로 본 논문에서는, 짧은 JTE 길이에서 높은 도핑 농도를 필요로 하는 MFZ-JTE보다 DZ-JTE와 SM-JTE가 실제 소자 설계에 있어 가장 효과적인 JTE 기법으로 분석되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1615-1617
• /
• 2002

본 논문은 얇은 실리콘 산화막 트렌치를 이용하여 같은 항복 전압에서 면적을 줄이는 접합 마감(junction termination)을 제안하였다. 제안된 P+FLR(Floating Field Ring) 구조는 기존 P+ FLR구조에 비해 항복 전압 571 V에서 면적을 83 %로 감소시켜 접합 마감 특성이 개선되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.396-399
• /
• 2003

4H-SiC un diodes with field limiting rings(FLRs) were fabricated and characterized. The dependences of reverse breakdown voltage on the number of FLRs, the distance between p-base main junction and first FLR, and activation temperatures, were investigated. Al and B ions were implanted and activated at high temperature to form p-base region and p+ region in the n-epilayer. We have obtained up to 1782V of reverse breakdown voltage in the un diode with two FLRs on loom thick epilayer. The differential on-resistances of the fabricated diode are $5.3m{\Omega}cm^2$ at $100A/cm^2$ and $2.7m{\Omega}cm^2$ at $1kA/cm^2$, respectively. All pn diodes with FLRs have higher avalanche breakdown voltages than that of diode without an FLR. Regardless of the activation temperature, the un diode with a FLR located 5um apart from main junction has the highest mean breakdown voltage around 1600V among the diodes with one ring. On the other hand, the pn diode with two rings showed different behavior with activation temperature. It reveals that high voltage SiC pn diodes with low on-resistance can be fabricated by using the FLR edge termination.