• Clinical and Experimental Pediatrics
• /
• 제58권9호
• /
• pp.358-361
• /
• 2015

Hemophagocytic lymphohistiocytosis (HLH) is characterized by fever, splenomegaly, jaundice, and pathologic findings of hemophagocytosis in bone marrow or other tissues such as the lymph nodes and liver. Pleocytosis, or the presence of elevated protein levels in cerebrospinal fluid, could be helpful in diagnosing HLH. However, the pathologic diagnosis of the brain is not included in the diagnostic criteria for this condition. In the present report, we describe the case of a patient diagnosed with HLH, in whom the brain pathology, but not the bone marrow pathology, showed hemophagocytosis. As the diagnosis of HLH is difficult in many cases, a high level of suspicion is required. Moreover, the pathologic diagnosis of organs other than the bone marrow, liver, and lymph nodes may be a useful alternative.

• 펄프종이기술
• /
• 제45권4호
• /
• pp.65-74
• /
• 2013

In the manufacture of corrugated box, the fibrous raw materials are mainly consisted of recycled papers, such as KOCC(Korean Old Corrugated Container), kraft sack, and AOCC(American Old Corrugated Container). Among these recycled waste paper, the proportion of KOCC is relatively higher than others in fibrous raw materials. Generally, KOCC shows some poor fiber properties and contains hazardous heavy metal sources. Therefore, it is to evaluate the property of recycled paper sources for eco-friendly corrugated box manufacture. In this study, the physical and mechanical properties of 3 kinds of recycled fibers and their mixed stocks were analyzed. The environmental assessment was also evaluated by analyzing the 4 representative heavy metal contents and evaporation residues in waste papers. As the results, KOCC showed the poorest fiber qualities and had the highest heavy metal contents and evaporation residues among the recycled fibers. Finally, the mechanical strength properties were increased by decreasing KOCC proportion of mixed stock conditions. In addition, the heavy metal contents and evaporation residues were also decreased by increasing recycled AOCC and kraft sack proportion.

• 한국재료학회지
• /
• 제14권4호
• /
• pp.235-238
• /
• 2004

The LT-MBE (low temperature molecular beam epitaxy) allows to dope GaAs with Mn over its solubility limit. A 75 urn thick GaMnAs layers are grown on a low temperature grown LT-GaAs buffer layer at a substrate temperature of $260^{\circ}C$ by varying Mn contents ranged from 0.03 to 0.05. The typical growth rate for GaMnAs layer is fixed at 0.97 $\mu\textrm{m}$/h and the V/III ratio is varied from 25 to 34. The electrical and magnetic properties are investigated by Hall effect and superconducting quantum interference device(SQUID) measurements, respectively. Double crystal X-ray diffraction(DCXRD) is also performed to investigate the crystallinity of GaMnAs layers. The $T_{c}$ of the $Ga_{l-x}$ /$Mn_{x}$ As films grown by LT-MBE are enhanced from 38 K to 65 K as x increases from 0.03 into 0.05 whereas the $T_{c}$ becomes lower to 45 K when the V/III ratio increases up to 34 at the same composition of x=0.05. This means that the ferromagnetic exchange coupling between Mn-ion and a hole is affected by the growth condition of the enhanced V/III ratio in which the excess-As and As-antisite defects may be easily incorporated into GaMnAs layer.

• 한국재료학회지
• /
• 제24권8호
• /
• pp.393-400
• /
• 2014

NiO catalysts were successfully coated onto FeCrAl metal alloy foam as a catalyst support via a dip-coating method. To demonstrate the optimum amount of NiO catalyst on the FeCrAl metal alloy foam, the molar concentration of the Ni precursor in a coating solution was controlled, with five different amounts of 0.4 M, 0.6 M, 0.8 M, 1.0 M, and 1.2 M for a dip-coating process. The structural, morphological, and chemical bonding properties of the NiO-catalyst-coated FeCrAl metal alloy foam samples were assessed by means of field-emission scanning electron microscopy(FESEM), scanning electron microscopy-energy dispersive spectroscopy(SEM-EDS), X-ray diffraction(XRD), and X-ray photoelectron spectroscopy(XPS). In particular, when the FeCrAl metal alloy foam samples were coated using a coating solution with a 0.8 M Ni precursor, well-dispersed NiO catalysts on the FeCrAl metal alloy foam compared to the other samples were confirmed. Also, the XPS results exhibited the chemical bonding states of the NiO phases and the FeCrAl metal alloy foam. The results showed that a dip-coating method is one of best ways to coat well-dispersed NiO catalysts onto FeCrAl metal alloy foam.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제19권1호
• /
• pp.29-37
• /
• 2016

Purpose: The aim of our study was to establish a safe and convenient diagnostic method for acute gastrointestinal (GI) graft-versus-host disease (GVHD) in children by determining the sensitivity and negative predictive values of upper and lower endoscopic biopsies for children suspected of GI GVHD. Methods: Patients suspected of GI GVHD who received endoscopic evaluation within 100 days after stem cell transplantation and endoscopies between January 2012 and March 2014 in Seoul National University Children's Hospital were included in our study. Results: Fifteen patients with a total of 20 endoscopic procedures were included in our study. Sensitivity at the esophagus, stomach, and duodenum were 22.2%, 30.0%, and 80.0%, respectively. Negative predictive values at the esophagus, stomach, and duodenum were 22.2%, 30.0%, and 60.0%, respectively. Overall sensitivity and negative predictive values of upper endoscopic biopsy for GVHD were 77.8% and 50.0%, respectively. Overall sensitivity and negative predictive values of lower endoscopic biopsy for GVHD were 88.9% and 66.7%, respectively. Conclusion: We recommend flexible sigmoidoscopy as a safe and accurate diagnostic tool for GVHD, similar to other studies reported previously. However, if there is no evidence of GVHD on sigmoidoscopy with high index of suspicion of GI bleeding, full colonoscopy and upper endoscopy should be considered.

• 한국엔터테인먼트산업학회논문지
• /
• 제14권1호
• /
• pp.159-166
• /
• 2020

본 연구는 건강한 20대 성인 20명을 대상으로 3D Newton box를 이용한 PNF의 통합패턴 운동을 실시한 후 균형, 고유감각, 유연성의 즉각적인 효과를 알아보기 위해 시행되었다. 본 연구에서 수집된 자료는 SPSS Window 19.0 통계 프로그램을 이용하여 분석하였으며, 대상자들의 일반적 특성은 기술통계를 사용하여 평균과 표준편차를 산출하였고 집단 내 균형, 고유감각, 유연성의 전·후 차이는 대응 표본 t-검정으로 분석하였다. 대상자들의 균형, 고유감각, 유연성을 Y-balance, 눈 고 한 발 서기, 손가락 바닥 닿기를 이용하여 측정하였고, 운동은 3D Newton box 안에서 PNF의 통합패턴을 적용하였다. 운동 후 균형, 고유감각, 유연성 모두 유의하게 증가하였다. 이와 같은 결과를 통해 3D Newton box를 이용한 PNF의 통합패턴 운동이 20대 성인의 균형, 고유감각, 유연성에 즉각적으로 효과가 나타남을 알 수 있었다. 따라서 균형, 고유감각, 유연성의 감소로 인해 손상 위험도가 높은 성인 또는 환자에게 적극적으로 활용될 수 있는 운동이라고 사료된다.

• 한국정보전자통신기술학회논문지
• /
• 제9권6호
• /
• pp.559-565
• /
• 2016

본 교차로에 각 방향별 이동류의 상충해소를 위한 목적으로 도입된 교통신호제어는 차량증가에 따라 여러 교차로를 연계하여 정지와 지체시간을 최소화하는 간선도로 제어 목적으로 바뀌었고 이를 위해 교통신호운영 효율화를 위한 다양한 방법이 제시되고 있다. 본 연구는 도심 가로축 연동체계를 교통운영체계 선진화 방안에서 제시하고 있는 비보호좌회전확대로 운영되는 선직진 후좌회전 체계와 기존 실시간 대응제어 신호운영체계를 비교 분석하였으며, 비교 분석을 위해 4개시 5개 지역을 선정 평균 교차로 간격, 연동 가로축 거리 등을 구분하였다. 그 결과 교통운영체계 선진화 방안 신호운영체계의 교통처리용량은 실시간 대응제어 신호운영체계의 교통처리용량 보다 주기 160초 때 차로 당 286대, 140초 경우 308대, 120초 경우 264대가 증가하여 1차로 도로확장을 한 만큼의 효과가 있는 것으로 나타났다. 또한 가로축 연동에 대해서도 가로축 길이 2.0~3.0km, 2.0km미만에서 분석 주기(160초, 140초, 120초) 모두에서 연동밴드 폭이나 정지횟수에서 효과가 있는 것으로 나타났다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.369-369
• /
• 2016

A nanostructure composite is a highly suitable substance for photoacoustic ultrasound generation. This allows an input laser beam (typically, nanosecond pulse duration) to be efficiently converted to an ultrasonic output with tens-of-MHz frequency. This type of energy converter has been demonstrated by using a carbon nanotube (CNT)-polydimethylsiloxane (PDMS) composite film that exhibit high optical absorption, rapid heat transition, and mechanical durability, all of which are necessary properties for high-amplitude ultrasound generation. In order to develop the CNT-PDMS composite film, a high-temperature chemical vapor deposition (HTCVD) method has been commonly used so far to grow CNT and then produce a CNT-PDMS composite structure. Here, instead of the complex HTCVD, we use a mixed solution of hydrophobic multi-walled CNT and dimethylformamid (DMF) and fabricate a solution-processed CNT-PDMS composite film over a spherically concave substrate, i.e. a focal energy converter. As the solution process can be applied over a large area, we could easily fabricate the focal transmitter that focuses the photoacoustic output at the moment of generation from the CNT-PDMS composite layer. With this method, we developed photoacoustic energy converters with a large diameter (>25 mm) and a long focal length (several cm). The lens performance was characterized in terms of output pressure amplitude for an incident pulsed laser energy and focal spot dimension in both lateral and axial. Due to the long focal length, we expect that the new lens can be applied for long-range ultrasonic treatment, e.g. biomedical therapy.

• 펄프종이기술
• /
• 제46권4호
• /
• pp.1-10
• /
• 2014

In papermaking industry, inorganic fillers are widely used for the purpose of improving opacity, brightness, printability, uniformity and dimensional stability. They are also useful for production costs and energy savings. In the past, inorganic fillers in papermaking industry only focused on micro-scale but recently, new trials on nano-powdered technology are applying. Even nano-powdered fillers are rapidly utilized for improving the optical and surface properties in coating and surface sizing, there still have some problems in wet-end process due to poor dispersibility and retention. In this study, nano-particled calcium carbonate was produced by milling the PCC and its applicability between micro sized and nano sized calcium carbonated was compared in wet-end process, and finally the sheet properties were evaluated. Nano-PCC was not retained in sheet structure without applying retention system, but with retention system nano-powdered PCC was absorbed on fiber surface with expanding the fiber networks. The application of PAM-bentonite system has resulted in high ash retention and bulky structure for copier paper, and good optical properties in brightness and opacity. However, it required to solve the weakness of low tensile property due to interruption of hydrogen bonding by nano fillers.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2010년도 춘계학술대회
• /
• pp.139-142
• /
• 2010

전자해도는 항해장비의 화면 축척이 해도의 기본 축척보다 소축척으로 설정되어 있을 경우 해도 정보의 겹침 현상이 발생하여 정보 가독성이 떨어지는 문체점이 있다. 국제수로기구에서는 이를 개선하기 위해 S-65 표준에 SCAMIN 속성 개선 모텔을 포함한 바 있다. 그러나 IHO에서 발표한 SCAMIN 모델에는 전자해도 속성에 대한 특정 요건 만족 등의 간단한 조건과 함께 특정 객체가 수심지역, 육상지역, 준설지역 등의 면 객체와 중첩 여부, 수심값의 중요도에 따른 단계적 적용 풍 수작업을 필요로 하는 까다로운 요건이 포함되어 있다. 본 연구에서는 S-65 표준의 SCAMIN 모델 요건을 분석하고, 본 요건을 합리적이고 기계적으로 적용하기 위한 알고리즘과 적용 프로그램을 개발 하였다. 또한 SCAMIN 속성 개선 프로그램을 이용하여 우리나라 전자해도에 적용하였으며 그 결과를 평가 하였다.