• Journal of Drive and Control
• /
• v.17 no.2
• /
• pp.45-54
• /
• 2020

The IMV is a combination of four two-way valve systems which replace a conventional four-way spool valve to improve efficiency mostly in excavator hydraulics. As the environmental regulations for construction equipment have tightened, some overseas advanced companies have released commercial excavators in which the MCV is implemented with the IMVs. Development of the IMV type MCV relies on the control algorithm as well as the robust performance of proportional flow control valves. In this study, the IMV controller was designed and verified with experiments for the excavator working unit, which determines the IMV mode of operation and the extent of the valve opening in consideration of the load conditions on hydraulic actuators. First, the open-loop controller was designed with a joystick command vs. a PSV reference current map comprising several control parameters in to compensate for the different flow characteristics and non-linearities of two-way flow control valves. Second, the closed-loop controller was designed with the PI control fed by the actuator displacement and outputs actuator percent effort equivalent to the operator's joystick command. Finally, the performance of the IMV type MCV was verified with the trajectory control of position references derived from the energy consumption test standard. Experimental results showed the control performance of the IMV developed in this study, and suggest that future studies to be conducted to advance technical progress.

• Journal of Drive and Control
• /
• v.15 no.4
• /
• pp.81-90
• /
• 2018

Indoor construction site such as building demolition sites, tunnel, vinyl house, and cattle shed are subject to various risk factors such as falling stones, soot and bad odors. However, most of the mini excavators have no cabin that can protect the driver from such risk factors. Therefore, researches on remote control technology of construction equipment are actively conducted as a method for protecting the driver from the risk factors occurring in the working environment. For effective remote control, it is necessary to be able to control the travelling and work using a portable small transmitter. However, due to the limitation of the size of the transmitter, complex operation control is required to control two or more actuators with a single joystick. Also, it is essential to check how remote control characteristics change in various environments such as distance, signal strength, obstacle. Therefore, in this study, an algorithm that can control two actuators simultaneously with a single joystick signal was developed, and a communication method suitable for indoor and outdoor mini construction equipment by analyzing experimentally how the remote control characteristics vary according to various work environments and telecommunication methods proposed.

• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.798-804
• /
• 2016

This paper proposes a new operation and control strategy for Power-Assisted Wheelchairs (PAW) using one brushless DC (BLDC) motor. The conventional electrical wheelchairs are too heavy and large for one person to move because they have two electric motor wheels. On the other hand, the proposed PAW system has a small volume and is easy to move due to the presence of a single wheel motor. Unlike the conventional electric wheelchairs, this structure for a PAW does not have a control joystick to reduce its weight and volume. To control the wheelchair without a joystick, a special control system and algorithm are needed for proper operation of the wheelchair. In the proposed PAW system uses only one sensor to detect the acceleration and direction of PAW's movement. By using this sensor, speed control can be achieved. With a speed control system, there are three kinds of operations that can be done on the speed of a PAW: the increment of PAW speed by summing external force, the decrement of PAW speed by subtracting external force, and emergency breaking by evaluating the time duration of external force. The validity of the proposed algorithm is verified through experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.235-235
• /
• 2000

This paper proposes a tole force feedback control through internet systems. The system consists of joystick, solver, client, robot, and internet. The main contribution of this work is the implementation of the system rather than theoretical analysis. The time delay problems will be considered next step.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.8
• /
• pp.111-118
• /
• 2023

In this paper, we propose a WiFi-based joystick with an acceleration sensor and a vibration sensor that can be used in flight simulators and VR fields. The flight simulator is a technology belonging to the ICT and SW application field and provides a simulation environment that reproduces the aircraft environment. Existing flight simulator control devices are fixed to a specific device and the user's activity area is limited. In this paper, a 3D space manipulation device was implemented for the user's free use of space. In addition, the proposed control device is designed as a WiFi communication board and display that displays information and performs 3-axis sensing for accurate and sophisticated control compared to existing VR equipment controllers. And the applicability was confirmed by implementing a Unity-based virtual environment. As a result of the implementation device verification, it was confirmed that the control device operates normally through the communication interface, It was confirmed that the sensing values in the game and the sensing values measured on the implemented board matched each other. The results of this study can be used for VR and various metaverse related contents in addition to flight simulators.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.05a
• /
• pp.10-13
• /
• 2002

In this study, we used a 16-bit microprocessor, 80C196KC for a control part in order to develop a multi-functional wheel-chair system, and implemented a joy-stick to control this system. For the complete system, we used a commercial electromotive wheelchair as a basic plant, and applied an encoder to get the rotating number of the motor to transfer data to the MCU to control the motor. We used PWM (Pulse Width Modulation) method to control the wheel-chair motor where a H-bridge circuit was configured. We used the fuzzy control algorithm for the operation of DC motor, which was attached to the electromotive wheelchair and manipulated following the change of the joystick position while a user was controlling the Joystick. He also could control the speed and direction of DC motor as well as control position information.

• Journal of Mechanical Science and Technology
• /
• v.19 no.6
• /
• pp.1290-1303
• /
• 2005

In this research, a remote control system has been developed and implemented, which combines autonomous obstacle avoidance in real-time with force-reflective tele-operation. A tele-operated mobile robot is controlled by a local two-degrees-of-freedom force-reflective joystick that a human operator holds while he is monitoring the screen. In the system, the force-reflective joystick transforms the relation between a mobile robot and the environment to the operator as a virtual force which is generated in the form of a new collision vector and reflected to the operator. This reflected force makes the tele-operation of a mobile robot safe from collision in an uncertain and obstacle-cluttered remote environment. A mobile robot controlled by a local operator usually takes pictures of remote environments and sends the images back to the operator over the Internet. Because of limitations of communication bandwidth and the narrow view-angles of the camera, the operator cannot observe shadow regions and curved spaces frequently. To overcome this problem, a new form of virtual force is generated along the collision vector according to both distance and approaching velocity between an obstacle and the mobile robot, which is obtained from ultrasonic sensors. This virtual force is transferred back to the two-degrees-of-freedom master joystick over the Internet to enable a human operator to feel the geometrical relation between the mobile robot and the obstacle. It is demonstrated by experiments that this haptic reflection improves the performance of a tele-operated mobile robot significantly.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.1
• /
• pp.51-56
• /
• 2003

The main goal of existing mobile robot system was a complete autonomous navigation and the vision information was just used as an assistant way such as monitoring For this reason, the researches have been going towards sophistication of autonomousness gradually and the production costs also has been risen. However, it is also important to control remotely an inexpensive mobile robot system which has no intelligence at all. Such systems may be much more effective than fully autonomous systems in practice. Visual information from a simple camera and distance information from ultrasonic sensors are used for this system. Collision avoidance becomes the most important problem for this system. In this paper, we developed a force feedback joystick to control the robot system remotely with collision avoiding capability. Fuzzy logic is used for the algorithm in order to implement the expert s knowledge intelligently. Some experimental results show the force feedback joystick werks very well.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.363-364
• /
• 2009

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.7
• /
• pp.631-636
• /
• 2007

An efficient obstacle avoidance algorithm is proposed in this paper to avoid dynamic obstacles using a collision vector while a tele-operated mobile robot is moving. For the verification of the algorithm, an operator watches through a monitor and controls the mobile robot with a force-reflection joystick. The force-reflection joystick transmits a virtual force to the operator through the Inter-net, which is generated by an adaptive impedance algorithm. To keep the mobile robot safe from collisions in an uncertain environment, the adaptive impedance algorithm generates the virtual force which changes the command of the operator by pushing the operator's hand to a direction to avoid the obstacle. In the conventional virtual force algorithm, the avoidance of moving obstacles was not solved since the operator cannot recognize the environment realistically by the limited communication bandwidth and the narrow view-angle of the camera. To achieve the dynamic obstacle avoidance, the adaptive virtual force algorithm is proposed based on the collision vector that is a normal vector from the obstacle to the mobile robot. To verify the effectiveness of the proposed algorithm, mobile robot navigation experiments with multiple moving obstacles have been performed, and the results are demonstrated.