• Progress in Superconductivity
• /
• v.7 no.1
• /
• pp.11-16
• /
• 2005

Coupling of non-linear oscillators have long been an interesting problem for physicists. The coupling phenomena have been frequently observed in Josephson junction series array, which have been used for Josephson voltage standard. Interestingly pronounced self-generation effect has been found during recent development of Josephson arrays for programmable Josephson voltage standard. But the coupling effect between the self-generations is not fully understood yet. We present harmonically approximated analytical solutions for coupled self-generations in the Josephson arrays, i.e., Superconductor-Insulator-Normal metal-Insulator-Superconductor (SINIS) array, externally shunted Superconductor-Insulator-Supercondctor (es-SIS) array, Superconductor-Normal metal-Superconductor (SNS) array. We find that the coupling between the self-generated Josephson oscillations through microwave transmission line plays critical role in microwave property of the Josephson array.

• Progress in Superconductivity
• /
• v.9 no.1
• /
• pp.56-61
• /
• 2007

The most recent improvement in the 10 V array system was carried out with focusing on noise reduction. We have evaluated the uncertainty of the 10 V Josephson array system after the improvement. The uncertainty evaluation of 10 V standard included a comparison with a programmable Josephson array system at 1 V. Every contribution to the measurement uncertainty was evaluated in the level of $10^{-10}$. The estimated combined uncertainty was found to be approximately $10^{-9}$ at 10 V, which was limited only by the indirect verifying method. In the near future, a direct comparison with another 10 V Josephson voltage standard is expected to be carried out to provide more accurate uncertainty evaluation for the KRISS Josephson voltage standard.

• Progress in Superconductivity
• /
• v.10 no.2
• /
• pp.144-148
• /
• 2009

A current limiter was manufactured using a Josephson junction array to cut off an excessive current flowing into the SQUID sensor. The Fabricateed Josephson junction array was connected in series with a flux transformer that consists of a pick-up coil and an input coil, and the flux transformer was inductively coupled with a Double Relaxation Oscillation SQUID(DROS). The flux-voltage modulation curve was induced by applying an AC magnetic field whose magnitude was far smaller than that of the DC magnetic field. A change in the flux-voltage modulation curve of the SQUID was observed while the DC magnetic field was increased, to qualitatively examine the current limiting characteristic of the Josephson junction array. As a result, it was found that the SQUID flux-voltage modulation curve disappeared at the critical current of the Josephson junction array, which indicates that the Josephson junction array properly works as a current limiter.

• Progress in Superconductivity
• /
• v.4 no.1
• /
• pp.59-63
• /
• 2002

10-V Josephson junction array arranged in 8 parallel stripline paths was fabricated using self-aligning and reactive ion etching techniques. These techniques were introduced in detail with aim of obtaining high-quality junctions. The array has 18,184 Josephson junctions with the area of $12\mu\textrm{m}$$\times$$38\mu\textrm{m}$. The gap voltage and minimum critical current density were about 2.7 ㎷ and ／$23 A\textrm{cm}^2$, respectively. And the critical current density and leakage current at 5 volt were about 27 $A／\textrm{cm}^2$ and $5\mu\textrm{A}$, respectively When operated in the frequency range of 76-88 ㎓, the away generated constant voltage steps up to 14-19 V. The step size near 10-V was more than 7 $\mu\textrm{A}$.

• 한국초전도학회:학술대회논문집
• /
• v.16
• /
• pp.39-39
• /
• 2006

• 한국초전도학회:학술대회논문집
• /
• v.13
• /
• pp.45-45
• /
• 2003

• 한국초전도학회:학술대회논문집
• /
• v.12
• /
• pp.54-54
• /
• 2002

• 한국초전도학회:학술대회논문집
• /
• v.14
• /
• pp.2-2
• /
• 2004

• 한국초전도학회:학술대회논문집
• /
• 2007.07a
• /
• pp.45-45
• /
• 2007

• Progress in Superconductivity
• /
• v.3 no.1
• /
• pp.49-55
• /
• 2001

Josephson junction arrays were fabricated by DC magnetron sputtering, self-aligning and reactive ion etching technique. The Al native oxide, formed by thermal oxidation, was used as the tunneling barrier of Nb/$Al-A1_2$$O_3$Nb trilayer. The arrays have 2,000 Josephson junctions with the area of $14\mu\textrm{m}$ $\times$ $46\mu\textrm{m}$. The gap voltages were in the range of 2.5 ~2.6 mV and the spread of critical current was $\pm$11~14%. When operated at 70~94 ㎓, the arrays generated zero-crossing steps up to 2.1~2.4 V. To improve transmission of microwave power and prevent diffusion of oxygen into Nb ground-plane while depositing $SiO_2$dielectric, we applied a plasma nitridation process to the Nb ground-plane. The microwave power was well propagated in Josephson junction arrays with nitridation. The difference in microwave transmission 7an be interpreted by the surface impedance change depending on nitridation.