• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.142-149
• /
• 1995

This paper presents a new kinematic control strategy for serial redundant manipulators which gives repeatability in the joint space when the end-effector undergoes some general cyclic motions. Theoretical development has been accomplished by deriving a new inverse kinematic equation that is based on springs being conceptually located in the joints of the manipulator. Although some inverse kinematic equations for serial redundant manipulators have been derived by many researchers, the new strategy is the first to include the free angles of torsional springs and the free lengths of the translational springs. This is important because it ensures repeatability in the joint space of a serial redundant manipulator whose end-effector undergoes a cyclic type motion. Numerical verification for repeatability is done in terms of Lie Bracket Condition. Choices for the free angle and torsional stiffness of a joint (or the free length and translational stiffness) are made based upon the mechanical limits of the joints.

• 제어로봇시스템학회논문지
• /
• 제3권5호
• /
• pp.482-489
• /
• 1997

This paper presents the analysis of the kinematics and dynamics of redundant parallel manipulators, and provides design guides for advanced parallel mainpulators with high performance. Three types of redundancies are considered which include the redundancies in serial chain, joint actuation, and parallelism. First, the kinematic and dynamic models of a redundant parallel manipulator are obtained in both joint and Cartesian spaces, and the kinematic and dynamic manipulabilities are defined for the performance evaluation. The effects of the three types of redundancies on the kinematic and dynamic performance of a parallel manipulator are then analyzed and compared, providing a set of guides for the design of advanced parallel manipulators. Finally, the simulation results using planer parallel manipulators are given.

• 한국정밀공학회지
• /
• 제8권4호
• /
• pp.137-145
• /
• 1991

A universal joint is a connecting device of two hinges which can transmit torque from one shaft to another at fixed or at varying angles of intersection. It has been used properly not only as rotational but also as intermittent motion. For the particular kinematics condition of a universal joint, torsional and bending vibrations are produced excessively in an elastic driveline. In this paper only the torsional vibration behavior of a driveline with universal joints is analyzed numerically with the discrete model and a design method of the dynamic vibration damper is proposed, in order to reduce torsional vibrations especially in resonance region as a result of parametric variation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.564-568
• /
• 1992

A neural optimization network is designed to solve the collsion-free inverse kinematics problem for redundant robot manipulators under the constraints of joint limits, maximum velocities and maximum accelerations. And the fuzzy rules are proposed to determine the weightings of neural optimization networks to avoid the collision between robot manipulator and obstacles. The inputs of fuzzy rules are the resultant distance, change of the distance and sum of the changes. And the output of fuzzy rules is defined as the capability of collision avoidance of joint differential motion. The weightings of neural optimization networks are adjusted according to the capability of collision avoidance of each joint. To show the validities of the proposed method computer simulation results are illustrated for the redundant robot with three degrees of freedom,

• 대한기계학회논문집A
• /
• 제31권8호
• /
• pp.889-895
• /
• 2007

Quantifying dynamic stability is important to assessment of falling risk or functional recovery for leg injured people. Human locomotion is complex and known to exhibit nonlinear dynamical behaviors. The purpose of this study is to quantify major joints of the body using chaos analysis during walking. Time series of the chaotic signals show how gait patterns change over time. The gait experiments were carried out for ten young males walking on a motorized treadmill. Joint motions were captured using eight video cameras, and then three dimensional kinematics of the neck and the upper and lower extremities were computed by KWON 3D motion analysis software. The correlation dimension and the largest Lyapunov exponent were calculated from the time series to quantify stabilities of the joints. This study presents a data set of nonlinear dynamic characteristics for eleven joints engaged in normal level walking.

• 한국공작기계학회논문집
• /
• 제16권6호
• /
• pp.217-222
• /
• 2007

This paper describes a static gait generation process and a mechanical design process of leg mechanisms for quadruped robots. Actually robot walking is realized with the joint motion of leg mechanisms. In order to calculate the time-angle trajectories for each joint of leg mechanisms, we generate end-tip trajectories with time for each leg in the global inertial coordinate system intuitively, followed by coordinate transformations of the trajectories into the local coordinates system fixed in each leg, finally the angle-time trajectories of each joint of leg mechanisms are obtained with inverse kinematics. The stability of the gait generated in this paper was verified by a multi-body dynamic analysis using the commercial software $ADAMS^{(R)}$. Additionally the mechanical specifications such as gear reduction ratio, electrical specifications of motor and electrical power consumption during walking have been confirmed by the multi-body dynamic analysis. Finally we constructed a small quadruped robot and confirmed the gait.

• 대한산업공학회지
• /
• 제22권4호
• /
• pp.579-588
• /
• 1996

The purpose of this paper is to develop a method of Collision-Free Path Planning (CFPP) for an articulated robot. First, the configuration of the robot is built by a set of robot joint angles derived from robot inverse kinematics. The joint space, that is made of the joint angle set, forms a Configuration space (Cspcce). Obstacles in the robot workcell are also transformed into the Cobstacles using slice projection method. Actually the Cobstacles means the configurations of the robot causing collision with obstacles. Secondly, a connected graph, a kind of roadmap, is constructed by the free configurations in the Cspace, where the free configurations are randomly sampled from a free Cspace immune from the collision. Thirdly, robot paths are optimally determinant in the connected graph. A path searching algorithm based on $A^*$ is employed in determining the paths. Finally, the whole procedures for the CFPP method are shown for a proper articulated robot as an illustrative example.

• 대한기계학회논문집B
• /
• 제41권3호
• /
• pp.153-160
• /
• 2017

보행 분석은 다양한 지형에서 수행되고 있으나 지형이 변화되는 시점에서의 보행 분석 연구는 보고된 바 없다. 본 연구의 목적은 삼각경사 보행 시 지형이 변화되는 시점에서 발목 및 무릎 관절의 운동학과 운동역학을 평지 보행과 비교 분석하는 것이다. 3차원 동작분석 시스템과 지면 반력기를 사용하여 성인 남성 18명의 하지 운동학 및 운동역학 자료를 획득하였다. 삼각경사 보행에서 최대 발목 배측굴곡각 및 모멘트와 최대 무릎 신전 모멘트가 평지보행과 비교하였을 때 증가하였다(p<0.05). 삼각경사의 상승경사 보행 시 $50^{\circ}$가 넘는 무릎 굽힘각과 그 시기에 발생하는 큰 무릎 신전 모멘트는 슬개대퇴증후군의 위험을 높일 수 있을 것으로 보인다. 또한 삼각경사의 하강경사 보행에서 증가된 발목 배측굴곡 운동범위는 비복근과 아킬레스건 부상 위험을 높일 수 있을 것으로 보인다.

• 대한기계학회논문집A
• /
• 제34권10호
• /
• pp.1345-1350
• /
• 2010

앉기-서기 동작은 인간의 생체역학적 기능 정도를 결정할 수 있는 기본적인 일상생활 동작의 하나이다. 동작 중 발생하는 관절의 운동 정보와 모멘트, 그리고 근력을 예측하는 것은 앉기-서기 동작의 특성을 이해하는데 필요하다. 본 연구에서는 동작 기반 역동역학해석 프로그램과 근전도 기반 근력예측 프로그램을 개발하였다. 개발된 프로그램과 앉기-서기 동작 실험에서 측정한 동작, 지면반력, 그리고 근전도신호 정보를 이용하여 실험적 방법으로 측정하기 힘든 관절각도, 관절모멘트, 및 근력을 예측하고 기존 연구결과와 비교하여 검증하였다. 개발된 기법과 프로그램들은 일상생활 동작에서의 관절 생체역학과 근육 협응에 대한 지식을 얻는 데 사용될 수 있으리라 기대한다.

• 한국운동역학회지
• /
• 제21권1호
• /
• pp.1-7
• /
• 2011

The purpose of this study was to investigate changes in kinetic and kinematic variables associated with an increase in upper body weight. Eighteen healthy male university students($175.96{\pm}4.19\;cm$, $70.79{\pm}8.26\;kg$) participated. Eight motion analysis cameras(Qualysis Oqus 500) and 2 force AMTI platforms(Advanced Mechanical Technologies Inc. OR6-7, US) were used to record motion and forces during the drop landing at a frequency of 120 Hz and 1200 Hz, respectively. QTM software(Qualisys Track Manager) was used to record the data, and the variables were analyzed with Visual 3D and Matlab 2009. For the drop landing, a box of $4{\times}2{\times}0.46\;m$ was constructed from wood. Knee and ankle maximum flexion angle, knee flexion angle, knee and ankle angle at landing, time for maximum ankle flexion after landing, and time for maximum knee flexion after landing were calculated. There was a significant change in the time for maximum and minimum ground force reaction and the time for maximum dorsal flexion after landing(p<.05) with increasing weight. There was no significant change for the hip, knee, and ankle ROM, whereas there was an increase in the angle ROM as the weight increased, in the order of ankle, knee, and hip ROM. This result shows that the ankle joint ROM increased with increasing weight for shock attenuation during the drop landing. There was a trend for greater ankle ROM than knee ROM, but there was no clear change in the ROM of the hip joint with increasing weight. In conclusion, this study shows the importance of ankle joint flexibility and strength for safe drop landing.