• Title/Summary/Keyword: Joint development

Search Result 1,980, Processing Time 0.032 seconds

A Study on the Temporomandibular Joint Disorder and School Life Stress of High School Student by Department (계열별 남자고등학생의 학교생활스트레스와 측두하악장애에 관한 연구)

  • Lee, Jung-Hwa;Choi, Jung-Mi
    • Journal of dental hygiene science
    • /
    • v.7 no.3
    • /
    • pp.179-185
    • /
    • 2007
  • The purpose of this study targeted on high school student in the department of liberal arts, industry in Daegu metropolitan city, is to get basic data necessary for the development of dental educational program, to discern prevention and treatment of temporomandibular joint disorder by observing the situation temporomandibular joint disorder and contribution element, of relationship of school life stress The results are as follows.: 1. The percentage of occurring temporomandibular joint disorder in the high school resulted in a joint noise at 61.8% and joint dislocation 6.9%, sharp pain 47.5% at time of chewing. 29.8% at the time of the non-chewing, lockjaw 11.3%, a headache appeared at 40.4%.2. In the contribution factor of occurring temporomandibular joint disorder, the cause of joint noise was the clench one's teeth, lip and cheek clench, For the pain at the time of chewing clench one's teeth, one side chewing, over-chewing, lip clench, sideways sleeping showed the difference. (P < 0.01) For the pain at the time of non-chewing, clench one's teeth, bruxism, one side chewing, lip and cheek clench were similar, and for the lockjaw, clench one's teeth, bruxism, sideways sleeping showed the difference. The plum evil thing period at time of the fault writing that statistically showed the difference. For the headache, the contribution factors were the all bad habits mentioned above excluding one side sleeping.(P < 0.01, P < 0.05). 3. The rate of experiencing temporomandibular joint disorder by oral and maxillofacia was 13.4% in industrial department, and 19.6% in liberal arts. And for the factor of wound was that exercise 26.8%, others 24.4%, fall-down 19.5%. And for the industrial, exercise 44.4%, fall-down 22.2%, others 14.9%. The treatment experience appeared at 5.0% in industrial department, 2.9% in liberal arts. And for the medical institutions, liberal arts were dental clinic 50%, orthopedics 50%, and the industrial department orthopedics 40%, oriental medicine clinic 30%, dental clinic 30%. 4. In case of temporomandibular joint disorder, there were no difference by grades or educational background. And at the time of chewing or non-chewing showed similar difference.(P < 0.01). 5. Compared to stress in the high school, it generally showed higher in liberal arts than in industrial department due to school record. Its scope was $3.75{\pm}1.14$ in liberal arts, $3.01{\pm}1.23$ in industrial department. 6. The school record, school life, stress problems by teachers, chewing/non-chewing pain of temporomandibular joint disorder, joint noise had a similar correlation.(P < 0.01, < 0.05).

  • PDF

Development of exoskeletal type tendon driven haptic device (텐던 구동방식의 장착형 역/촉감 제시기구의 개발에 관한 연구)

  • 이규훈;최혁렬
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 1997.10a
    • /
    • pp.1285-1288
    • /
    • 1997
  • The basic technology of virtual reality can be described as the cognition of the condition change in virtual world by stimulating the visual, auditory, kinesthetic and tactile sensation. Among these, the kinesthetic and tactile sensation is one of the most important things to recognize the interaction. In this paper, it is addressed the haptic device which help the human feel the sense of the operator, and is designed in modular type to expand for five fingers later. the haptic device is driven by tendon and ultrasonic motors located in the wrist part. Each joint is actuated by coupled tendons and adopts more actrator by one than the number of the joints, called 'N+1 type'. The haptic device adopts metamorphic 4-bar linkage structure and the length of linkages, shape and the location of joint displacement sensor are optimized through the analysis.

  • PDF

Development of Reinforced Concrete Column and Steel Beam Composite Joints (철근콘크리트 기둥과 철골 보 합성구조 접합부 시스템 개발)

  • 김도균;정하선;최완철
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2001.05a
    • /
    • pp.691-698
    • /
    • 2001
  • Recent trends in the construction of long span or tall building frames feature the increase use of composite members that steel and concrete is functioning together in what terms of mixed structural systems. One of such systems, RCS (reinforced concrete column and steel beam) system is introduced and closely examined focusing on bearing strength of the composite joint in this paper. The main objective of this study was to develope detail to increase bearing capacity while bearing failure is one of the two primary modes of failure in RCS system. The results show that specimens with the U-type bearing reinforcement detail developed in this study enhanced the bearing strength by 1.20-1.50. The U-type reinforcement is the effective details to increase joint bearing strength compared to others like vertical reinforcement welded to beam flanges.

  • PDF

Subjective Fatigue and Its Influencing Factors in Patients having Chronic Arthritis (만성관절염 환자의 주관적 피로와 영향 요인)

  • Lim, Nan-Young;Lee, Eun-Young
    • Journal of muscle and joint health
    • /
    • v.6 no.1
    • /
    • pp.73-84
    • /
    • 1999
  • This study was conducted to identify the characteristics of fatigue and its influencing factors in patients having chronic arthritis. The subjects of this study were 120 patients who visited a Rheumatis Center of H University Hospital. Data were collected from Aug. 9, 1997 to Feb. 5, 1998. For analysing data, SPSS/Win was used for descriptive statistics & Pearson's correlation coefficient, and Lisrel 8.0 was for path analysis. The findings were as follows : 1. Mean score of subjective fatigue was 5.36 and it means moderate degree of fatigue. 2. Fatigue showed positive relationship with pain & depression, and it showed negative relationship with ADL & self efficacy. 3. Fatigue was influenced by pain and depression. and was not influenced by ADL and self efficacy directly. But ADL and self efficacy influenced on fatigue through pain and depression indirectly. According to this findings. the significant influencing factors of fatigue were pain and depression, therefore the development of nursing intervention for relieving pain and depression would be needed.

  • PDF

Development of Tubular Shaft for Reduction of Booming Noise in Vehicle Interior (차량 부밍 소음 저감을 위한 중공축 개발)

  • 고강호;국형석;이재형
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.10 no.1
    • /
    • pp.203-208
    • /
    • 2002
  • In order to reduce the booming noise caused by first bending mode of a drive shaft, this paper proposes a simulation program for prediction of the bending mode frequency of any tubular shaft. This program consists of a pre-processor for modeling of geometrical shape of the drive shaft with boundary conditions of various joints, a processor for constructing of global finite element matrices using beam elements and an eigen-solver based on MATLAB program. Using this simulation program, the effective and accurate FE model far a shaft attached to vehicle can be obtained by aid of database for stiffness of each joint. Thus the resonance frequencies and mode shapes of a shaft can be calculated accurately. Because the effect of the resonance on interior noise can be verified, more improved shaft will be proposed at the early stage of design.

Development of Intelligent Filler Wire Feeding Device for Improvement of Weld quality (용접부 품질향상을 위한 지능형 용접 와이어 공급 장치 개발)

  • Lee J.S.;Sohn Y.I.;Park K.Y.;Lee K.D.
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2005.06a
    • /
    • pp.950-955
    • /
    • 2005
  • This paper describes an intelligent filler wire feeding device which can control 3- dimensional seam tracking and the filler wire speed by measuring the gap position and the joint gap width in laser welding. By means of visual sensor controlled filling the missing material into the joint gap and 3 dimensional seam tracking, lineup errors from manufacturing tolerances and the repeatability of lineup jigs and weld robot can be balanced and at an even seam quality which avoids weld defects. In this paper, we assessed weld quality in 2mm sheets of A16061 which had various gap width by using the intelligent filler wire feeding device.

  • PDF

THE DEVELOPMENT OF STOP JOINT (using Shield Metal Embeded Type Epoxy Unit) (Shield Metal Embeded Type Epoxy Unit 사용의 OF 케이블용 유지 접속함의 개발)

  • HwangBo, S.;Park, H.D.;Lee, K.C.;Huh, G.D.;Han, K.M.
    • Proceedings of the KIEE Conference
    • /
    • 1991.07a
    • /
    • pp.277-280
    • /
    • 1991
  • We have developed 154kV OF cable accessories from 1987. 4 to 1990. 10 by doing assembly design, investing equipment, manufacturing inspecting parts, type testing in labortary, in our company, in KEPCO. The one of those accessories. Oil Stop Joint, has been developed by using Shield Metal Embeded Type Epoxy Unit. This is More reliable than old type.

  • PDF

Development of the Revised Self-Organizing Neural Network for Robot Manipulator Control (로봇 메니퓰레이터 제어를 위한 개조된 자기조직화 신경망 개발)

  • Koo, Tae-Hoon;Rhee, Jong-Tae
    • Journal of Korean Institute of Industrial Engineers
    • /
    • v.25 no.3
    • /
    • pp.382-392
    • /
    • 1999
  • Industrial robots have increased in both the number and applications in today's material handling systems. However, traditional approaches to robot controling have had limited success in complicated environment, especially for real time applications. One of the main reasons for this is that most traditional methods use a set of kinematic equations to figure out the physical environment of the robot. In this paper, a neural network model to solve robot manipulator's inverse kinematics problem is suggested. It is composed of two Self-Organizing Feature Maps by which the workspace of robot environment and the joint space of robot manipulator is inter-linked to enable the learning of the inverse kinematic relationship between workspace and joint space. The proposed model has been simulated with two robot manipulators, one, consisting of 2 links in 2-dimensional workspace and the other, consisting of 3 links in 2-dimensional workspace, and the performance has been tested by accuracy of the manipulator's positioning and the response time.

  • PDF

A Study on Development of Exercise Simulation System out of regard for Korea's Armed Forces (한국군 주도의 연습모의체계 발전 연구)

  • Park, Chong-Jae;Lee, Jong-Ho
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.11 no.9
    • /
    • pp.3271-3276
    • /
    • 2010
  • Preparing to reclaim the wartime operational control of South Korea's armed forces, Korea Military have to embattle the right capability in relation to conduct of the war. Although Korea Military are operating Joint Exercise Simulation Training System, they are having a lot of difficulties because of interoperability according to a joint exercise with USA military and pursue an independent korea military models. Therefore this study analyzes technical problems and proposes some measures to establish Exercise Simulation System out of regard for South Korea's self defense.

Development of a program for Scoliosis FE Model Automatic Generation (척추측만증 유한 요소 모델 자동 생성 프로그램 개발)

  • 유한규;김영은
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2004.10a
    • /
    • pp.1154-1159
    • /
    • 2004
  • Unexpected postoperative changes, such as growth in rib hump, has been occasionally reported after corrective surgery for scoliosis. However there has been experimental data for explanation of these changes, nor the suggestion of optimal correction method. This numerical study was designed to investigate the main correlating elements in operative kinematics with post-operative changes of vertebral rotation and rib cage deformation in the corrective surgery of scoliosis. To develop a scoliotic spine model automatically, a special program for converting normal spine model to scoliotic spine model was developed. A mathematical finite element model of normal spine including rib cage, sternum, both clavicles, and pelvis was developed with anatomical details. The skeletal deformity of scoliosis was reconstructed, by mapping the X-ray images of a scoliosis into this three dimensional normal spine and rib cage model. The geometric mapping was performed by translating and rotating the spinal colume with the amount analyzed from the digitized 12 built-in coordinate axes in each vertebral image. By utilizing this program, problems generated in mapping procedure such as facet joint overlapping, vertebral body deformity could be automatically resolved.

  • PDF